alpsRemPeerConnStatIntvl

CISCO-ALPS-MIB · .1.3.6.1.4.1.9.9.95.1.2.4.1.17
MIB view Table view

Object

column Integer32 
The time interval (in seconds) between transmission of
consecutive ALPS Peer Status messages.  These messages 
are only transmitted if zero messages are received on the 
peer connection for a length of time greater than or equal 
to this timer.

Context

MIB
CISCO-ALPS-MIB
OID
.1.3.6.1.4.1.9.9.95.1.2.4.1.17
Type
column
Access
readonly
Status
current
Parent
alpsRemPeerConnEntry
Table
alpsRemPeerConnTable
Siblings
26

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-300

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
alpsRemPeerConnIpAddr
The IP address of the ALPS remote peer.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.9.9.95.1.2.4.1.1
alpsRemPeerConnNumActCirc
The number of ALPS virtual circuits using the connection to this ALPS remote peer.
columnInteger32.1.3.6.1.4.1.9.9.95.1.2.4.1.10
alpsRemPeerConnLastTxRx
The value of sysUpTime when a peer data message was last transmitted or received across this ALPS remote peer connection. This timestamp is not update if the peer message is a pee…
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.9.9.95.1.2.4.1.11
alpsRemPeerConnLastRxAny
The value of sysUpTime when a peer data or status message is last received across the ALPS remote peer connection.
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.9.9.95.1.2.4.1.12
alpsRemPeerConnIdleTimer
A dynamic activation ALPS peer connection will be closed if zero peer data messages are sent or received for a length of time greater than or equal to this timer.
columnSNMPv2-TCTimeInterval.1.3.6.1.4.1.9.9.95.1.2.4.1.13
alpsRemPeerConnNoCircTimer
A dynamic activation ALPS peer connection will be closed if zero ALPS circuits are active or attempt to activate for a length of time greater than or equal to this timer.
columnSNMPv2-TCTimeInterval.1.3.6.1.4.1.9.9.95.1.2.4.1.14
alpsRemPeerConnTCPQLen
The maximum number of ALPS peer messages that can be queued in a single TCP session.
columnInteger32.1.3.6.1.4.1.9.9.95.1.2.4.1.15
alpsRemPeerConnAlarmsOn
This parameter specifies whether ALPS alarms are generated for this ALPS remote peer connection.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.95.1.2.4.1.16
alpsRemPeerConnStatRetry
The number of consecutive unanswered ALPS Peer Status messages transmitted before closing the conenction to the ALPS remote peer.
columnInteger32.1.3.6.1.4.1.9.9.95.1.2.4.1.18
alpsRemPeerConnDownReason
Reason that an ALPS Peer connection failed to open sauccessfully.
columnEnumeration.1.3.6.1.4.1.9.9.95.1.2.4.1.19
alpsRemPeerConnIdString
A descriptive ASCII string that is used to distinguish among different peer connections to the same ALPS remote peer IP address.
columnOctetString.1.3.6.1.4.1.9.9.95.1.2.4.1.2
alpsRemPeerConnOutPackets
Number of packets transmitted on this ALPS remote peer connection.
columnpackets SNMPv2-SMICounter32.1.3.6.1.4.1.9.9.95.1.2.4.1.20
alpsRemPeerConnOutOctets
Number of octets transmitted on this ALPS remote peer connection.
columnpackets SNMPv2-SMICounter32.1.3.6.1.4.1.9.9.95.1.2.4.1.21
alpsRemPeerConnInPackets
Number of packets received on this ALPS remote peer connection.
columnpackets SNMPv2-SMICounter32.1.3.6.1.4.1.9.9.95.1.2.4.1.22
alpsRemPeerConnInOctets
Number of octets received on this ALPS remote peer connection.
columnpackets SNMPv2-SMICounter32.1.3.6.1.4.1.9.9.95.1.2.4.1.23
alpsRemPeerConnDropsGiant
Number of ALPS peer packets dropped due to exceeding the maximum allowed packet size of 3840 bytes.
columnpackets SNMPv2-SMICounter32.1.3.6.1.4.1.9.9.95.1.2.4.1.24
alpsRemPeerConnDropsQFull
Number of ALPS peer packets dropped because the TCP output queue is full.
columnpackets SNMPv2-SMICounter32.1.3.6.1.4.1.9.9.95.1.2.4.1.25
alpsRemPeerConnDropsUnreach
Number of ALPS peer packets dropped because the ALPS remote peer is unreachable.
columnpackets SNMPv2-SMICounter32.1.3.6.1.4.1.9.9.95.1.2.4.1.26
alpsRemPeerConnDropsVersion
Number of ALPS peer packets dropped because of a version mismatch in the ALPS encapsulation.
columnpackets SNMPv2-SMICounter32.1.3.6.1.4.1.9.9.95.1.2.4.1.27
alpsRemPeerConnLocalPort
The local TCP port number used by the underlying TCP connection to an ALPS remote peer.
columnInteger32.1.3.6.1.4.1.9.9.95.1.2.4.1.3
alpsRemPeerConnForeignPort
The foreign (remote) TCP port number used by the underlying TCP connection to an ALPS remote peer.
columnInteger32.1.3.6.1.4.1.9.9.95.1.2.4.1.4
alpsRemPeerConnState
The state of the connection to an ALPS remote peer.
columnEnumeration.1.3.6.1.4.1.9.9.95.1.2.4.1.5
alpsRemPeerConnProtocol
The ALPS protocol encapsulation used on the connection to the ALPS remote peer. This protocol encapsulation is a layer above TCP.
columnEnumeration.1.3.6.1.4.1.9.9.95.1.2.4.1.6
alpsRemPeerConnCreation
The stimulus for creating the peer connection object. The peer connection object may be created solely due to configuration (admin) or due to a combination of configuration and …
columnEnumeration.1.3.6.1.4.1.9.9.95.1.2.4.1.7
alpsRemPeerConnActivation
Basis for activation a peer connection. A permanent activation peer connection will attempt to open immediately and stay open, regardless of the usage of the peer connection. A …
columnEnumeration.1.3.6.1.4.1.9.9.95.1.2.4.1.8
alpsRemPeerConnUptime
Elapsed time since the ALPS peer connection was successfully established.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.9.9.95.1.2.4.1.9