alpsRemPeerConnAlarmsOn
CISCO-ALPS-MIB ·
.1.3.6.1.4.1.9.9.95.1.2.4.1.16
Object
column
SNMPv2-TCTruthValue
This parameter specifies whether ALPS alarms are generated for this ALPS remote peer connection.
Context
- MIB
- CISCO-ALPS-MIB
- OID
.1.3.6.1.4.1.9.9.95.1.2.4.1.16- Type
- column
- Access
- readonly
- Status
- current
- Parent
- alpsRemPeerConnEntry
- Table
- alpsRemPeerConnTable
- Siblings
- 26
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alpsRemPeerConnIpAddr The IP address of the ALPS remote peer. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.95.1.2.4.1.1 |
| alpsRemPeerConnNumActCirc The number of ALPS virtual circuits using the
connection to this ALPS remote peer. | column | Integer32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.10 |
| alpsRemPeerConnLastTxRx The value of sysUpTime when a peer data message
was last transmitted or received across this
ALPS remote peer connection. This timestamp is not
update if the peer message is a pee… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.95.1.2.4.1.11 |
| alpsRemPeerConnLastRxAny The value of sysUpTime when a peer data or
status message is last received across the
ALPS remote peer connection. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.95.1.2.4.1.12 |
| alpsRemPeerConnIdleTimer A dynamic activation ALPS peer connection will be closed
if zero peer data messages are sent or received for
a length of time greater than or equal to this timer. | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.9.9.95.1.2.4.1.13 |
| alpsRemPeerConnNoCircTimer A dynamic activation ALPS peer connection will be closed
if zero ALPS circuits are active or attempt to activate
for a length of time greater than or equal to this timer. | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.9.9.95.1.2.4.1.14 |
| alpsRemPeerConnTCPQLen The maximum number of ALPS peer messages that
can be queued in a single TCP session. | column | Integer32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.15 |
| alpsRemPeerConnStatIntvl The time interval (in seconds) between transmission of
consecutive ALPS Peer Status messages. These messages
are only transmitted if zero messages are received on the
peer conn… | column | Integer32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.17 |
| alpsRemPeerConnStatRetry The number of consecutive unanswered ALPS Peer Status
messages transmitted before closing the conenction to
the ALPS remote peer. | column | Integer32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.18 |
| alpsRemPeerConnDownReason Reason that an ALPS Peer connection failed to
open sauccessfully. | column | Enumeration | .1.3.6.1.4.1.9.9.95.1.2.4.1.19 |
| alpsRemPeerConnIdString A descriptive ASCII string that is used to distinguish
among different peer connections to the same ALPS remote
peer IP address. | column | OctetString | .1.3.6.1.4.1.9.9.95.1.2.4.1.2 |
| alpsRemPeerConnOutPackets Number of packets transmitted on this ALPS
remote peer connection. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.20 |
| alpsRemPeerConnOutOctets Number of octets transmitted on this ALPS
remote peer connection. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.21 |
| alpsRemPeerConnInPackets Number of packets received on this ALPS
remote peer connection. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.22 |
| alpsRemPeerConnInOctets Number of octets received on this ALPS
remote peer connection. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.23 |
| alpsRemPeerConnDropsGiant Number of ALPS peer packets dropped due to exceeding
the maximum allowed packet size of 3840 bytes. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.24 |
| alpsRemPeerConnDropsQFull Number of ALPS peer packets dropped because
the TCP output queue is full. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.25 |
| alpsRemPeerConnDropsUnreach Number of ALPS peer packets dropped because
the ALPS remote peer is unreachable. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.26 |
| alpsRemPeerConnDropsVersion Number of ALPS peer packets dropped because
of a version mismatch in the ALPS encapsulation. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.27 |
| alpsRemPeerConnLocalPort The local TCP port number used by the underlying
TCP connection to an ALPS remote peer. | column | Integer32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.3 |
| alpsRemPeerConnForeignPort The foreign (remote) TCP port number used by the
underlying TCP connection to an ALPS remote peer. | column | Integer32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.4 |
| alpsRemPeerConnState The state of the connection to an ALPS remote peer. | column | Enumeration | .1.3.6.1.4.1.9.9.95.1.2.4.1.5 |
| alpsRemPeerConnProtocol The ALPS protocol encapsulation used on the
connection to the ALPS remote peer. This protocol
encapsulation is a layer above TCP. | column | Enumeration | .1.3.6.1.4.1.9.9.95.1.2.4.1.6 |
| alpsRemPeerConnCreation The stimulus for creating the peer connection object.
The peer connection object may be created solely due to
configuration (admin) or due to a combination of
configuration and … | column | Enumeration | .1.3.6.1.4.1.9.9.95.1.2.4.1.7 |
| alpsRemPeerConnActivation Basis for activation a peer connection. A permanent activation peer
connection will attempt to open immediately and stay open, regardless
of the usage of the peer connection. A … | column | Enumeration | .1.3.6.1.4.1.9.9.95.1.2.4.1.8 |
| alpsRemPeerConnUptime Elapsed time since the ALPS peer connection
was successfully established. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.9.95.1.2.4.1.9 |