alpsRemPeerConnActivation
CISCO-ALPS-MIB ·
.1.3.6.1.4.1.9.9.95.1.2.4.1.8
Object
column
Enumeration
Basis for activation a peer connection. A permanent activation peer connection will attempt to open immediately and stay open, regardless of the usage of the peer connection. A dynamic activation peer connection only opens when there is data to send and the peer connection will close if there are no data messages sent or received across the peer for the duration of the idle timer.
Context
- MIB
- CISCO-ALPS-MIB
- OID
.1.3.6.1.4.1.9.9.95.1.2.4.1.8- Type
- column
- Access
- readonly
- Status
- current
- Parent
- alpsRemPeerConnEntry
- Table
- alpsRemPeerConnTable
- Siblings
- 26
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | permanent |
2 | dynamic |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alpsRemPeerConnIpAddr The IP address of the ALPS remote peer. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.95.1.2.4.1.1 |
| alpsRemPeerConnNumActCirc The number of ALPS virtual circuits using the
connection to this ALPS remote peer. | column | Integer32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.10 |
| alpsRemPeerConnLastTxRx The value of sysUpTime when a peer data message
was last transmitted or received across this
ALPS remote peer connection. This timestamp is not
update if the peer message is a pee… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.95.1.2.4.1.11 |
| alpsRemPeerConnLastRxAny The value of sysUpTime when a peer data or
status message is last received across the
ALPS remote peer connection. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.95.1.2.4.1.12 |
| alpsRemPeerConnIdleTimer A dynamic activation ALPS peer connection will be closed
if zero peer data messages are sent or received for
a length of time greater than or equal to this timer. | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.9.9.95.1.2.4.1.13 |
| alpsRemPeerConnNoCircTimer A dynamic activation ALPS peer connection will be closed
if zero ALPS circuits are active or attempt to activate
for a length of time greater than or equal to this timer. | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.9.9.95.1.2.4.1.14 |
| alpsRemPeerConnTCPQLen The maximum number of ALPS peer messages that
can be queued in a single TCP session. | column | Integer32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.15 |
| alpsRemPeerConnAlarmsOn This parameter specifies whether ALPS alarms
are generated for this ALPS remote peer connection. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.95.1.2.4.1.16 |
| alpsRemPeerConnStatIntvl The time interval (in seconds) between transmission of
consecutive ALPS Peer Status messages. These messages
are only transmitted if zero messages are received on the
peer conn… | column | Integer32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.17 |
| alpsRemPeerConnStatRetry The number of consecutive unanswered ALPS Peer Status
messages transmitted before closing the conenction to
the ALPS remote peer. | column | Integer32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.18 |
| alpsRemPeerConnDownReason Reason that an ALPS Peer connection failed to
open sauccessfully. | column | Enumeration | .1.3.6.1.4.1.9.9.95.1.2.4.1.19 |
| alpsRemPeerConnIdString A descriptive ASCII string that is used to distinguish
among different peer connections to the same ALPS remote
peer IP address. | column | OctetString | .1.3.6.1.4.1.9.9.95.1.2.4.1.2 |
| alpsRemPeerConnOutPackets Number of packets transmitted on this ALPS
remote peer connection. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.20 |
| alpsRemPeerConnOutOctets Number of octets transmitted on this ALPS
remote peer connection. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.21 |
| alpsRemPeerConnInPackets Number of packets received on this ALPS
remote peer connection. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.22 |
| alpsRemPeerConnInOctets Number of octets received on this ALPS
remote peer connection. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.23 |
| alpsRemPeerConnDropsGiant Number of ALPS peer packets dropped due to exceeding
the maximum allowed packet size of 3840 bytes. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.24 |
| alpsRemPeerConnDropsQFull Number of ALPS peer packets dropped because
the TCP output queue is full. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.25 |
| alpsRemPeerConnDropsUnreach Number of ALPS peer packets dropped because
the ALPS remote peer is unreachable. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.26 |
| alpsRemPeerConnDropsVersion Number of ALPS peer packets dropped because
of a version mismatch in the ALPS encapsulation. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.27 |
| alpsRemPeerConnLocalPort The local TCP port number used by the underlying
TCP connection to an ALPS remote peer. | column | Integer32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.3 |
| alpsRemPeerConnForeignPort The foreign (remote) TCP port number used by the
underlying TCP connection to an ALPS remote peer. | column | Integer32 | .1.3.6.1.4.1.9.9.95.1.2.4.1.4 |
| alpsRemPeerConnState The state of the connection to an ALPS remote peer. | column | Enumeration | .1.3.6.1.4.1.9.9.95.1.2.4.1.5 |
| alpsRemPeerConnProtocol The ALPS protocol encapsulation used on the
connection to the ALPS remote peer. This protocol
encapsulation is a layer above TCP. | column | Enumeration | .1.3.6.1.4.1.9.9.95.1.2.4.1.6 |
| alpsRemPeerConnCreation The stimulus for creating the peer connection object.
The peer connection object may be created solely due to
configuration (admin) or due to a combination of
configuration and … | column | Enumeration | .1.3.6.1.4.1.9.9.95.1.2.4.1.7 |
| alpsRemPeerConnUptime Elapsed time since the ALPS peer connection
was successfully established. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.9.95.1.2.4.1.9 |