alpsIfP1024PollPauseTimeout
CISCO-ALPS-MIB ·
.1.3.6.1.4.1.9.9.95.1.4.1.1.4
Object
Specifies the minimum delay between two poll cycles. Thus the poll pause interval is counted from the instant when the first ASCU in the poll list is polled. Note that this is the delay between two traversals of the entire poll list rather than the interval between two consecutive polls. The actual delay will probably be more than the value of this variable.
Context
- MIB
- CISCO-ALPS-MIB
- OID
.1.3.6.1.4.1.9.9.95.1.4.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- alpsIfP1024Entry
- Table
- alpsIfP1024Table
- Siblings
- 12
Values & Constraints
Type Constraints
range: 0..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alpsIfP1024EncapType Reports the encapsulation type for this Serial Interface. | column | Enumeration | .1.3.6.1.4.1.9.9.95.1.4.1.1.1 |
| alpsIfP1024NumAscus Reports the number of ASCUs configured on this Serial Port. | column | Ascus SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.95.1.4.1.1.10 |
| alpsIfP1024ServMsgFormat Specifies the format of the service message sent to an ASCU
on this interface. | column | Enumeration | .1.3.6.1.4.1.9.9.95.1.4.1.1.11 |
| alpsIfP1024ServMsgStatusChange Specifies whether service messages generated due
to an ALPS circuit status change or an ASCU status change,
will be forwarded to the ASCU. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.95.1.4.1.1.12 |
| alpsIfP1024ServMsgDropTermAddr Specifies whether the service message will be sent to the same
terminal address of the dropped message or the configured value. | column | Enumeration | .1.3.6.1.4.1.9.9.95.1.4.1.1.13 |
| alpsIfP1024PollRespTimeout Specifies the Poll Response Time out value. | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.9.9.95.1.4.1.1.2 |
| alpsIfP1024GATimeout Specifies the time-out delay between receipt of first character
of an input sequence solicited by a poll and receipt of GA
sequence. | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.9.9.95.1.4.1.1.3 |
| alpsIfP1024MaxErrCnt Specifies a maximum error count for this interface. After
an ASCU link comes up, if it experiences this number of errors the
ASCU link will be shutdown. The default value of 0 res… | column | Integer32 | .1.3.6.1.4.1.9.9.95.1.4.1.1.5 |
| alpsIfP1024MaxRetrans Specifies the maximum number of times an output message will
be retransmitted before it is discarded. This is relevant only
for P1024C (UTS). For ALC, a value of 0 will be returne… | column | Integer32 | .1.3.6.1.4.1.9.9.95.1.4.1.1.6 |
| alpsIfP1024CurrErrCnt Reports the number of errors currently existing for this
ASCU link. When this equals alpsIfP1024MaxErrCnt then the
ASCU link will be shut down, unless alpsIfP1024MaxErrCnt
equals … | column | Integer32 | .1.3.6.1.4.1.9.9.95.1.4.1.1.7 |
| alpsIfP1024MinGoodPollResp Specifies the number of good Poll Responses to be received
from an ASCU before it can be declared up. | column | Integer32 | .1.3.6.1.4.1.9.9.95.1.4.1.1.8 |
| alpsIfP1024PollingRatio Specifies how many times ASCUs in UP state are polled before
an ASCU in DOWN state is polled again. | column | Integer32 | .1.3.6.1.4.1.9.9.95.1.4.1.1.9 |