alpsCktP1024BackupPeerAddr
CISCO-ALPS-MIB ·
.1.3.6.1.4.1.9.9.95.1.3.3.1.2
Object
This is the IP address of the backup remote peer. This is optional and hence may not always exist.
Context
- MIB
- CISCO-ALPS-MIB
- OID
.1.3.6.1.4.1.9.9.95.1.3.3.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- alpsCktP1024Entry
- Table
- alpsCktP1024Table
- Siblings
- 14
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alpsCktP1024DlcType Specifies what type of circuit this is. | column | Enumeration | .1.3.6.1.4.1.9.9.95.1.3.3.1.1 |
| alpsCktP1024InPktSize Specifies X.25 maximum input Packet size on the Logical Channel
Number of this ALPS Circuit. The default input Packet size for
AX.25 is 240 bytes and 128 bytes for EMTOX. | column | bytes Integer32 | .1.3.6.1.4.1.9.9.95.1.3.3.1.10 |
| alpsCktP1024SvcMsgList Specifies the Service Message List Number to use on this
ALPS Circuit. This allows custom service messages to be sent
for ASCUs on a particular circuit. Service messages are sent … | column | Integer32 | .1.3.6.1.4.1.9.9.95.1.3.3.1.11 |
| alpsCktP1024SvcMsgIntvl Specifies Service Message Time Interval for the Service
messages to be sent this ALPS Circuit. This controls how
frequently the messages are repeated when an error condition
(e.g… | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.9.95.1.3.3.1.12 |
| alpsCktP1024DropsUnkAscu Number of packets that were found to be from an Unknown ASCU
(i.e. an ASCU that had not been configured) and hence were dropped. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.95.1.3.3.1.13 |
| alpsCktP1024RowStatus This object is used to create a new row or modify or
delete an existing row in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.95.1.3.3.1.14 |
| alpsCktP1024MatipCloseDelay Specifies the minumum delay between transmission of a MATIP
Close and the transmission of a MATIP Session Open for
this ALPS circuit. | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.9.9.95.1.3.3.1.15 |
| alpsCktP1024RetryTimer Specifies the interval at which a permanent ALPS circuit
will attempt to reestablish the circuit in case it wasn't
able to come up. | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.9.9.95.1.3.3.1.3 |
| alpsCktP1024IdleTimer If there is no traffic on a dynamic ALPS circuit for this
interval, it will be cleared. | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.9.9.95.1.3.3.1.4 |
| alpsCktP1024EmtoxX121 Specifies the X.121 address of the SVC established with
EMTOX host. This field should be set to length zero in
the case of PVCs (AX.25 host). | column | RFC1382-MIBX121Address | .1.3.6.1.4.1.9.9.95.1.3.3.1.5 |
| alpsCktP1024Ax25LCN Specifies the Logical Channel Number being used on the PVC
established with AX.25 host. This field should be set to zero in
the case of SVCs (EMTOX host). | column | Integer32 | .1.3.6.1.4.1.9.9.95.1.3.3.1.6 |
| alpsCktP1024WinOut Specifies X.25 transmit Window size on the Logical Channel
Number of this ALPS Circuit. | column | Integer32 | .1.3.6.1.4.1.9.9.95.1.3.3.1.7 |
| alpsCktP1024WinIn Specifies the X.25 receive Window size on the Logical Channel
Number of this ALPS Circuit. | column | Integer32 | .1.3.6.1.4.1.9.9.95.1.3.3.1.8 |
| alpsCktP1024OutPktSize Specifies the X.25 maxiumum output Packet size on the Logical
Channel Number of this ALPS Circuit. The default output Packet size
for AX.25 is 240 bytes and 128 bytes for EMTOX. | column | bytes Integer32 | .1.3.6.1.4.1.9.9.95.1.3.3.1.9 |