alpsAscuId
CISCO-ALPS-MIB ·
.1.3.6.1.4.1.9.9.95.1.5.1.1.1
Object
column
Integer32
Specifies the ASCU Identifier and uniquely identifies an ASCU on a given interface. This value is the Interface Address (IA) for ALC and the Remote Identifier (RID) for UTS. This uniquely identifies an ASCU on a given interface.
Context
- MIB
- CISCO-ALPS-MIB
- OID
.1.3.6.1.4.1.9.9.95.1.5.1.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- alpsAscuEntry
- Table
- alpsAscuTable
- Siblings
- 19
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-127
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alpsAscuDownReason Reports the Down reason for this ASCU if it is down. | column | Enumeration | .1.3.6.1.4.1.9.9.95.1.5.1.1.10 |
| alpsAscuOutPackets Number of packets transmitted to this ASCU. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.95.1.5.1.1.11 |
| alpsAscuOutOctets Number of octets transmitted to this ASCU. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.95.1.5.1.1.12 |
| alpsAscuInPackets Number of packets received from this ASCU | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.95.1.5.1.1.13 |
| alpsAscuInOctets Number of octets received from this ASCU. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.95.1.5.1.1.14 |
| alpsAscuDropsGarbledPkts The number of packets dropped due to the inability to properly
decode them. Examples of garbled packets include packets with bad
CRCs or bad header information | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.95.1.5.1.1.15 |
| alpsAscuDropsAscuDown The number of packets dropped because the ASCU had previously
been declared DOWN due to error thresholds being exceeded. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.95.1.5.1.1.16 |
| alpsAscuDropsAscuDisabled The number of packets dropped because the ASCU had previously
been declared to be in disabled state. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.95.1.5.1.1.17 |
| alpsAscuEnabled Specifies whether the ASCU has been enabled or not. After
the ASCU has been configured, it must be explicitly enabled to allow
it to be polled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.95.1.5.1.1.18 |
| alpsAscuRowStatus This object is used to create a new row or modify or
delete an existing row in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.95.1.5.1.1.19 |
| alpsAscuA1 A1 value of the ASCU. | column | AlpsAscuA1A2Value | .1.3.6.1.4.1.9.9.95.1.5.1.1.2 |
| alpsAscuAutoReset Specifies whether a reset command will be automatically issued
to any non-responsive ALC ASCUs. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.95.1.5.1.1.20 |
| alpsAscuA2 A2 value of the ASCU. | column | AlpsAscuA1A2Value | .1.3.6.1.4.1.9.9.95.1.5.1.1.3 |
| alpsAscuCktName Specifies the ALPS Circuit Name for the circuit that is to be
used for this ASCU's data. Note that all ASCUs on a physical interface
may not use the same ALPS circuit to connect t… | column | AlpsCktName | .1.3.6.1.4.1.9.9.95.1.5.1.1.4 |
| alpsAscuAlarmsEnabled Specifies whether alarms (syslog messages or SNMP traps) will
be generated for this ASCU. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.95.1.5.1.1.5 |
| alpsAscuRetryOption Specifies the retry option for this ASCU. This specifies the
error message to be sent to the terminal when a message
is dropped at the router. The terminal has three choices -
eit… | column | Enumeration | .1.3.6.1.4.1.9.9.95.1.5.1.1.6 |
| alpsAscuMaxMsgLength Specifies Maximum length of Input Message that can be received
from this ASCU. | column | bytes Integer32 | .1.3.6.1.4.1.9.9.95.1.5.1.1.7 |
| alpsAscuFwdStatusOption If this flag is set, status messages received from the ASCU are
forwarded to the host. Otherwise they are discarded. Note that these
are relevant only for P1024C (UTS). For ALC, a… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.95.1.5.1.1.8 |
| alpsAscuState Reports the current ASCU Status. ASCUs are initially in
disabled state. They are enabled from the parser
if the operator wants to. This takes them to an UP state from which
they … | column | Enumeration | .1.3.6.1.4.1.9.9.95.1.5.1.1.9 |