gnGenFeatureSupport
CERAGON-MIB ·
.1.3.6.1.4.1.2281.2.1.25
Object
scalar
mandatory
OctetString
Inidcation for feature support. msb is for bit #1. The bit is set when a specific feature is support. Bit #1 - Tftp server support. Bit #2 - Cold reset support. Bit #3 - Severity critical for external alarm. Bit #4 - MRMC filter table. Bit #5 - NeighborIP Support Fast and DS3. Bit #6 - Auxiliary channel drawer routing support. Bit #7 - Single drawer external protection support. Bit #8 - dual drawer external protection not support. Bit #9 - Left Drawer XPIC hardware support (0 - support, 1 - not support). Bit #10 - Right Drawer XPIC hardware support (0 - support, 1 - not support). Bit #11 - Internal Protection Not Supported (0 - support, 1 - not support). Bit #12 - One Ws Channel Only (0 - FALSE, 1 - TRUE). Bit #13 - Protect option not support (0 - support, 1 - not support). Bit #14 - UC ethernet support (0 - not support, 1 - support). Bit #15 - WSC only disable (0 - enable & disable, 1 - only disable). Bit #16 - UC only disable (0 - enable & disable, 1 - only disable). Bit #17 - EOW only disable (0 - enable & disable, 1 - only disable). Bit #18 - Left Drawer modem latency Not support (0 - support, 1 - not support). Bit #19 - Right Drawer modem latency Not support (0 - support, 1 - not support). Bit #20 - Clear PM for drawer (0 - support, 1 - not support). Bit #21 - Allow Sync mode in UC#2 (0 - not allow, 1 - allow). Bit #22 - External Alarm Switch not support (0 - support, 1 - not support). Bit #23 - Is Hitless config [Divesity Type,Revertive Mode and Revertive Time] are disable (0 - enable, 1 - disable). Bit #24 - QoS left carrier support (1 - support, 0 - not support). Bit #25 - QoS right carrier support (1 - support, 0 - not support). Bit #26 - ACM left carrier support (1 - support, 0 - not support). Bit #27 - ACM right carrier support (1 - support, 0 - not support). Bit #28 - ACM adaptive left carrier support (1 - support, 0 - not support). Bit #29 - ACM adaptive right carrier support (1 - support, 0 - not support). Bit #30 - Single left board reset not support (0 - support, 1 - not support). Bit #31 - Single right board reset not support (0 - support, 1 - not support). Bit #32 - Left drawer reset not support (0 - support,1 - not support). Bit #33 - Right drawer reset not support (0 - support,1 - not support). Bit #34 - All drawers reset support (0 - not support,1 - support). Bit #35 - License manager not support (0 - support,1 - not support). Bit #36 - Multi radio protection support (1 - support,0 - not support). Bit #37 - Copy IDC to left drawer not support (0 - support,1 - not support). Bit #38 - Copy IDC to right drawer not support (0 - support,1 - not support). Bit #39 - Copy IDC to all drawers support (0 - not support,1 - support). Bit #40 - Gigabit flow control support on left carrier(1 - support,0 - not support). Bit #41 - Gigabit flow control support on right carrier(1 - support,0 - not support). Bit #42 - Gigabit PM and statistics support on left carrier(1 - support,0 - not support). Bit #42 - Gigabit PM and statistics support on right carrier(1 - support,0 - not support).
Context
- MIB
- CERAGON-MIB
- OID
.1.3.6.1.4.1.2281.2.1.25- Type
- scalar
- Access
- readonly
- Status
- mandatory
- Parent
- gnGeneral
- Siblings
- 29
Syntax
OctetString
Values & Constraints
Object Constraints
range: 8-8
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| gnGenStandardOrg mandatory This parameter specifies which international standard is used. | scalar | Enumeration | .1.3.6.1.4.1.2281.2.1.1 |
| gnGenChannelBandwidth mandatory The TX channel bandwidth, displayed in 1/100 MHz.
For example:
An STM-1 ETSI TX channel bandwidth of 56MHz is displayed as the value 5600. | scalar | Integer32 | .1.3.6.1.4.1.2281.2.1.10 |
| gnGenTxFreqNumLocalRemote mandatory Indicates the radio transmit frequency, displayed in
1/100 MHz. WRITE changes the local and remote sides. Only for systems that
support frequency configuration (Not channel… | scalar | Integer32 | .1.3.6.1.4.1.2281.2.1.11 |
| gnGenProtocolType mandatory This is the radio mapping protocol. -C represents 'concatenated'. | scalar | Enumeration | .1.3.6.1.4.1.2281.2.1.12 |
| gnGenLinkId mandatory 0 for 'old' system that doesn't support the link ID.
the user can enter values from 1 to 65535 | scalar | Integer32 | .1.3.6.1.4.1.2281.2.1.13 |
| gnGenMibVersion mandatory The current software version supports this MIB version (and the previous MIB versions). | scalar | OctetString | .1.3.6.1.4.1.2281.2.1.14 |
| gnGenModemType mandatory The system modem type. | scalar | Enumeration | .1.3.6.1.4.1.2281.2.1.15 |
| gnGenRadioSide mandatory | scalar | Enumeration | .1.3.6.1.4.1.2281.2.1.16 |
| gnGenSystemWorkTime mandatory The System Work Time (hours). | scalar | Integer32 | .1.3.6.1.4.1.2281.2.1.17 |
| gnGenRxFreqNumLocalRemote mandatory Indicates the radio receive frequency, displayed in
1/100 MHz. WRITE changes the local and remote sides. Only for systems that
support frequency configuration (Not channel). | scalar | Integer32 | .1.3.6.1.4.1.2281.2.1.18 |
| gnGenLastCfgTimeandDate mandatory This parameter specifies the last configuration change time and date
Format 'YYYY-MM-DD,HH:MM:SS' (Hexadecimal).
A date-time specification.
field octets contents … | scalar | OctetString | .1.3.6.1.4.1.2281.2.1.19 |
| gnGenTxFreqRange mandatory This parameter specifies frequency ranges in Hertz. Value 1 to 13 are used
when the link
is working with channels. The notUsed value is used when the link is
working with frequenc… | scalar | Enumeration | .1.3.6.1.4.1.2281.2.1.2 |
| gnGenMostSevereAlarm mandatory This parameter specifies the current moset severe alarm in the system. | scalar | Enumeration | .1.3.6.1.4.1.2281.2.1.20 |
| gnGenIdcCfgTable mandatory | table | - | .1.3.6.1.4.1.2281.2.1.21 |
| gnGenIdcStatTable mandatory | table | - | .1.3.6.1.4.1.2281.2.1.22 |
| gnGeneralXTable mandatory | table | - | .1.3.6.1.4.1.2281.2.1.23 |
| gnGenAddAlarmExtToTraps mandatory If chose 'yes', the Alarm Id, Origin and Unit from gnAgnCurrentAlarmTable
will be bind to the end of each private trap. | scalar | Enumeration | .1.3.6.1.4.1.2281.2.1.24 |
| gnGeneralMrmcXTable mandatory | table | - | .1.3.6.1.4.1.2281.2.1.26 |
| gnGenDrawerXTable mandatory This table indicates drawer x. | table | - | .1.3.6.1.4.1.2281.2.1.27 |
| gnCluster | node | - | .1.3.6.1.4.1.2281.2.1.28 |
| gnSubrack | node | - | .1.3.6.1.4.1.2281.2.1.29 |
| gnGenRemoteConnection mandatory Is the connection between the local manager and
the remote manager. | scalar | Enumeration | .1.3.6.1.4.1.2281.2.1.3 |
| gnGenCarrierXTable mandatory This table indicates carrier x. | table | - | .1.3.6.1.4.1.2281.2.1.30 |
| gnGenRemoteDistance mandatory This field is the distance between the local and remote ODU, in meters.
This attribute does not auto-detect the distance.
It is used as part of the unfaded RSL calculation feature… | scalar | Integer32 | .1.3.6.1.4.1.2281.2.1.4 |
| gnGenInterLenLocalRemote mandatory This field is the FEC interleaver length - DONT CHANGE THIS FIELD !!!.
WRITE will change both local and remote sides. | scalar | Integer32 | .1.3.6.1.4.1.2281.2.1.5 |
| gnGenTxFreqLocalRemote mandatory This parameter indicates the radio TX channel number.
WRITE will change both LOCAL and REMOTE sides.
Not all radios will support TX frequency change via channel numbers. | scalar | Integer32 | .1.3.6.1.4.1.2281.2.1.6 |
| gnGenRealTimeandDate mandatory This parameter specifies the real time and date
Format 'YYYY-MM-DD,HH:MM:SS' (Hexadecimal).
A date-time specification.
field octets contents rang… | scalar | OctetString | .1.3.6.1.4.1.2281.2.1.7 |
| gnGenCfgDeviceTable mandatory This table contains general configuration info
per device, local and remote. | table | - | .1.3.6.1.4.1.2281.2.1.8 |
| gnGenStatDeviceTable mandatory This table contains general configuration info
per device; local and remote. | table | - | .1.3.6.1.4.1.2281.2.1.9 |