rdwrConfSyncRebootTimeout

CDE-MIB · .1.3.6.1.4.1.89.35.1.161.2.4
MIB view Table view

Object

scalar r/w Integer32 
Time in seconds allowed for slave to reboot. After this time slave is
considered disconnected. Must be in the range of 1 second to 10 minutes. Default
is 4 minutes (240 seconds). Value is assigned in seconds.

Context

MIB
CDE-MIB
OID
.1.3.6.1.4.1.89.35.1.161.2.4
Type
scalar
Access
readwrite
Status
current
Parent
rdwrConfigurationSyncConf
Siblings
17

Syntax

Integer32

Values & Constraints

Object Constraints
range: 1-600

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rdwrConfSyncMode
The role of the device inthe configuration synchronisation and whether the feature is enabled.
scalarEnumeration.1.3.6.1.4.1.89.35.1.161.2.1
rdwrConfSyncExcludeMgmtIP
Exclude the management ports IP interface from the synchronisations. When true the IPs have to be handled manually. Default value is false.
scalarRADWARE-MIBTruthValue.1.3.6.1.4.1.89.35.1.161.2.10
rdwrConfSyncExcludeMgmtCert
Exclude the WBM & SSH service configuration and the certificates references from them from the synchronisations. When true, their configuration has to be handled manually. Default…
scalarRADWARE-MIBTruthValue.1.3.6.1.4.1.89.35.1.161.2.11
rdwrConfSyncDiscoverMngIPOnly obsolete
obsolete
scalarRADWARE-MIBTruthValue.1.3.6.1.4.1.89.35.1.161.2.12
rdwrConfSyncFullSyncDelay
Time in seconds between the need to full sync is detected and the actual full sync operation. full sync will occure when this time is passed and the master wss idle (not configure…
scalarInteger32.1.3.6.1.4.1.89.35.1.161.2.13
rdwrConfSyncFullSyncMaxDelay
Maximum time in seconds between the need to full sync is detected and the actual full sync operation. Full sync will occure if this time passed, even if the master has been config…
scalarInteger32.1.3.6.1.4.1.89.35.1.161.2.14
rdwrConfSyncCommunicationPassword
Sets the password for the synchronization session. This is mandatory before activating the module.
scalarOctetString.1.3.6.1.4.1.89.35.1.161.2.15
rdwrConfSyncConnectionPreference
Specifies the first choice of IP through which config-sync connects to peer. Can also be set to the values 'any' and 'any-mng-ip'.
scalarOctetString.1.3.6.1.4.1.89.35.1.161.2.16
rdwrConfSyncAlternateConnectionPreference
Specifies the second choice of IP through which config-sync connects to peer. Can also be set to the values 'any', 'any-mng-ip' and 'none'.
scalarOctetString.1.3.6.1.4.1.89.35.1.161.2.17
rdwrConfSyncReconnect
Manually reconnect the config-sync connection to the secondary device.
scalarEnumeration.1.3.6.1.4.1.89.35.1.161.2.18
rdwrConfSyncRetryTimeout
Time in seconds between attempts to connect to configuration slave. Must be in the range of 1 second to 10 minutes. Default is 5 seconds.
scalarInteger32.1.3.6.1.4.1.89.35.1.161.2.2
rdwrConfSyncKeepAlivePeriod
Time in seconds between keep-alive messages to slave. Must be in the range of 5 seconds to 10 minutes. Default is 10 seconds.
scalarInteger32.1.3.6.1.4.1.89.35.1.161.2.3
rdwrConfSyncPeerDiscTrapDelay
Disconnected peer trap is only issued after this delay. If connection is reestablished within this time period trap is deferred. Must be in the range of 0 (immediate trap) to 1 ho…
scalarInteger32.1.3.6.1.4.1.89.35.1.161.2.5
rdwrConfSyncPeerResponseTimeout
Time in seconds allowed for response to arrive from peer. If the timeout is exceeded, peer is considered disconnected. Must be in the range of 1 second to 10 minutes. Default is 2…
scalarInteger32.1.3.6.1.4.1.89.35.1.161.2.6
rdwrConfSyncMasterActivityTimeout
Maximum time in seconds allowed by slave between master messages. If the timeout is exceeded. Slave considers master as disconnected. This value must be greater than keep alive fr…
scalarInteger32.1.3.6.1.4.1.89.35.1.161.2.7
rdwrConfSyncAllowRebootActiveDevice
Allow master to reboot slave event if the slave is the VRRP active device. Default value is false.
scalarRADWARE-MIBTruthValue.1.3.6.1.4.1.89.35.1.161.2.8
rdwrConfSyncRebootSlave
Manually reboot the secondary device.
scalarEnumeration.1.3.6.1.4.1.89.35.1.161.2.9