rdwrConfSyncAlternateConnectionPreference
CDE-MIB ·
.1.3.6.1.4.1.89.35.1.161.2.17
Object
scalar
r/w
OctetString
Specifies the second choice of IP through which config-sync connects to peer. Can also be set to the values 'any', 'any-mng-ip' and 'none'.
Context
- MIB
- CDE-MIB
- OID
.1.3.6.1.4.1.89.35.1.161.2.17- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- rdwrConfigurationSyncConf
- Siblings
- 17
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rdwrConfSyncMode The role of the device inthe configuration synchronisation and whether
the feature is enabled. | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.161.2.1 |
| rdwrConfSyncExcludeMgmtIP Exclude the management ports IP interface from the
synchronisations. When true the IPs have to be handled manually. Default
value is false. | scalar | RADWARE-MIBTruthValue | .1.3.6.1.4.1.89.35.1.161.2.10 |
| rdwrConfSyncExcludeMgmtCert Exclude the WBM & SSH service configuration and the certificates
references from them from the synchronisations. When true, their
configuration has to be handled manually. Default… | scalar | RADWARE-MIBTruthValue | .1.3.6.1.4.1.89.35.1.161.2.11 |
| rdwrConfSyncDiscoverMngIPOnly obsolete obsolete | scalar | RADWARE-MIBTruthValue | .1.3.6.1.4.1.89.35.1.161.2.12 |
| rdwrConfSyncFullSyncDelay Time in seconds between the need to full sync is detected and the actual full sync operation.
full sync will occure when this time is passed and the master wss idle (not configure… | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.161.2.13 |
| rdwrConfSyncFullSyncMaxDelay Maximum time in seconds between the need to full sync is detected and the actual full sync operation.
Full sync will occure if this time passed, even if the master has been config… | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.161.2.14 |
| rdwrConfSyncCommunicationPassword Sets the password for the synchronization session. This is mandatory before activating the module. | scalar | OctetString | .1.3.6.1.4.1.89.35.1.161.2.15 |
| rdwrConfSyncConnectionPreference Specifies the first choice of IP through which config-sync connects to peer. Can also be set to the values 'any' and 'any-mng-ip'. | scalar | OctetString | .1.3.6.1.4.1.89.35.1.161.2.16 |
| rdwrConfSyncReconnect Manually reconnect the config-sync connection to the secondary device. | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.161.2.18 |
| rdwrConfSyncRetryTimeout Time in seconds between attempts to connect to configuration
slave. Must be in the range of 1 second to 10 minutes. Default is 5
seconds. | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.161.2.2 |
| rdwrConfSyncKeepAlivePeriod Time in seconds between keep-alive messages to slave. Must be in the
range of 5 seconds to 10 minutes. Default is 10 seconds. | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.161.2.3 |
| rdwrConfSyncRebootTimeout Time in seconds allowed for slave to reboot. After this time slave is
considered disconnected. Must be in the range of 1 second to 10 minutes. Default
is 4 minutes (240 seconds). … | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.161.2.4 |
| rdwrConfSyncPeerDiscTrapDelay Disconnected peer trap is only issued after this delay. If connection
is reestablished within this time period trap is deferred. Must be in
the range of 0 (immediate trap) to 1 ho… | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.161.2.5 |
| rdwrConfSyncPeerResponseTimeout Time in seconds allowed for response to arrive from peer. If the
timeout is exceeded, peer is considered disconnected. Must be in the range of 1 second to 10
minutes. Default is 2… | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.161.2.6 |
| rdwrConfSyncMasterActivityTimeout Maximum time in seconds allowed by slave between master messages. If
the timeout is exceeded. Slave considers master as disconnected. This
value must be greater than keep alive fr… | scalar | Integer32 | .1.3.6.1.4.1.89.35.1.161.2.7 |
| rdwrConfSyncAllowRebootActiveDevice Allow master to reboot slave event if the slave is the VRRP active
device. Default value is false. | scalar | RADWARE-MIBTruthValue | .1.3.6.1.4.1.89.35.1.161.2.8 |
| rdwrConfSyncRebootSlave Manually reboot the secondary device. | scalar | Enumeration | .1.3.6.1.4.1.89.35.1.161.2.9 |