transmitCapacityLimitDetail
CAMBIUM-PTP800-MIB ·
.1.3.6.1.4.1.17713.8.6.27
Object
scalar
Enumeration
A brief description of the reason (if any) for the limit being applied to the transmit capacity
Context
- MIB
- CAMBIUM-PTP800-MIB
- OID
.1.3.6.1.4.1.17713.8.6.27- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- ethernet
- Siblings
- 32
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | limitedDueToAbsenceOfLicenseKey |
1 | runningAtTheCapacityLimit |
2 | runningAtUnlimitedCapacity |
3 | restrictedDueToRemoteEthernetSpeed |
4 | limitedDueToDevelopmentOverride |
5 | unlimitedDueToDevelopmentOverride |
6 | unlimitedCapacityTrialPeriod |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dataPortCopperAutoNegotiation This controls whether the configuration of the copper
data Ethernet interface is automatically negotiated or
forced. WARNING: ONLY USE FORCED AS A LAST RESORT. To
operate an Et… | scalar | Enumeration | .1.3.6.1.4.1.17713.8.6.1 |
| vLANManagementVID This VLAN VID (0-4094) will be included in packets
generated by the management interfaces | scalar | Integer32 | .1.3.6.1.4.1.17713.8.6.11 |
| ethernetPriorityTableNumber Number of entries in the ethernetPriorityTable. | scalar | Integer32 | .1.3.6.1.4.1.17713.8.6.14 |
| ethernetPriorityTable A priority queue mapping table. This is a list of packet queues indexed by Ethernet priority. | table | - | .1.3.6.1.4.1.17713.8.6.15 |
| managementPortAutoNegotiation This controls whether the configuration of the
out-of-band management Ethernet interface is
automatically negotiated or forced. WARNING: ONLY USE
FORCED AS A LAST RESORT. To op… | scalar | Enumeration | .1.3.6.1.4.1.17713.8.6.16 |
| managementPortAutoNegAdvertisement This sets the different configurations of the
out-of-band management Ethernet interface that will be
advertised during auto negotiation. WARNING: Duplex
mismatch may result if … | scalar | Bits | .1.3.6.1.4.1.17713.8.6.17 |
| managementPortStatus Current status of the out-of-band management Ethernet
link | scalar | Enumeration | .1.3.6.1.4.1.17713.8.6.18 |
| managementPortSpeedAndDuplex The current speed and duplex of the out-of-band
management Ethernet link | scalar | Enumeration | .1.3.6.1.4.1.17713.8.6.19 |
| dataPortCopperAutoNegAdvertisement This sets the different configurations of the copper
data Ethernet interface that will be advertised during
auto negotiation. WARNING: Duplex mismatch may result if
both ends o… | scalar | Bits | .1.3.6.1.4.1.17713.8.6.2 |
| managementPortWirelessDownAlert When enabled, this causes the out-of-band management
Ethernet link to be dropped briefly when the wireless
link drops. This is so that spanning tree algorithms can
quickly dete… | scalar | Enumeration | .1.3.6.1.4.1.17713.8.6.20 |
| managementMode Management mode: Out-of-band management. End-to-end
out-of-band mode in which the management agent can be
reached from the management port at the local CMU, and
(assuming that … | scalar | Enumeration | .1.3.6.1.4.1.17713.8.6.22 |
| managementCommittedInformationRate The Management Network Committed Information Rate (CIR).
The Management Network guarantees this capacity will be
available for management traffic | scalar | Enumeration | .1.3.6.1.4.1.17713.8.6.23 |
| dataPortPauseFrames Controls whether the bridge tunnels or discards Layer 2
PAUSE frames arriving at the data Ethernet port. Such
frames are identified by the destination MAC Address
being equal t… | scalar | Enumeration | .1.3.6.1.4.1.17713.8.6.24 |
| transmitCapacityLimit Transmit capacity is limited by the lower of: 1) the
capacity limit specified by the installed License Key. 2)
the Ethernet speed negotiated at the other end of the
wireless li… | scalar | Integer32 | .1.3.6.1.4.1.17713.8.6.26 |
| dataPortEthernetMediaTypeToUse The physical media type to use on the data Ethernet port | scalar | Enumeration | .1.3.6.1.4.1.17713.8.6.28 |
| dataPortCopperForcedConfiguration This forces the configuration of the copper data
Ethernet interface rather than using auto negotiation.
THE CONFIGURATION SHOULD ONLY BE FORCED IF YOU ARE HAVING
PROBLEMS WITH … | scalar | Enumeration | .1.3.6.1.4.1.17713.8.6.29 |
| managementPortForcedConfiguration This forces the configuration of the out-of-band
management Ethernet interface rather than using auto
negotiation. THE CONFIGURATION SHOULD ONLY BE FORCED IF
YOU ARE HAVING PRO… | scalar | Enumeration | .1.3.6.1.4.1.17713.8.6.30 |
| l2CPPriorityTableNumber Number of entries in the l2CPPriorityTable. | scalar | Integer32 | .1.3.6.1.4.1.17713.8.6.31 |
| l2CPPriorityTable A priority queue mapping table. This is a list of packet queues associated with the different layer 2 control protocol frameworks. | table | - | .1.3.6.1.4.1.17713.8.6.32 |
| unknownNetworkPriorityQueueMapping Configures the classification of unknown network
protocols to an egress queue at the wireless port.
Unknown means something other than IP and MPLS | scalar | Enumeration | .1.3.6.1.4.1.17713.8.6.33 |
| dSCPManagementPriority This Differentiated Services Code Point value will be
inserted in the IP Header of all IP Datagrams transmitted
by the management interfaces | scalar | Integer32 | .1.3.6.1.4.1.17713.8.6.34 |
| qOSPriorityScheme Selects classification based on fields in the Ethernet
header (Layer 2) or in the Network header (Layer 3). The
unit recognises two network layer protocols: IP and MPLS | scalar | Enumeration | .1.3.6.1.4.1.17713.8.6.35 |
| iPDSCPPriorityTableNumber Number of entries in the iPDSCPPriorityTable. | scalar | Integer32 | .1.3.6.1.4.1.17713.8.6.37 |
| iPDSCPPriorityTable A priority queue mapping table. This is a list of packet queues indexed by L3 IP DSCP priority. | table | - | .1.3.6.1.4.1.17713.8.6.38 |
| mPLSTCPriorityTableNumber Number of entries in the mPLSTCPriorityTable. | scalar | Integer32 | .1.3.6.1.4.1.17713.8.6.39 |
| dataPortStatus Current status of the data Ethernet link. NB: a change
of state may generate an SNMP trap and/or SMTP email
alert | scalar | Enumeration | .1.3.6.1.4.1.17713.8.6.4 |
| mPLSTCPriorityTable A priority queue mapping table. This is a list of priority queues indexed by MPLS TC priority. | table | - | .1.3.6.1.4.1.17713.8.6.40 |
| dataPortSpeedAndDuplex The current speed and duplex of the data Ethernet link | scalar | Enumeration | .1.3.6.1.4.1.17713.8.6.5 |
| dataPortWirelessDownAlert When enabled, this causes the data Ethernet link to be
dropped briefly when the wireless link drops. This is so
that spanning tree algorithms can quickly detect that
there is a… | scalar | Enumeration | .1.3.6.1.4.1.17713.8.6.6 |
| useVLANForManagementInterfaces This controls whether the management interfaces
(WWW/SNMP/SMTP/SNTP) use VLAN tags or not | scalar | Enumeration | .1.3.6.1.4.1.17713.8.6.7 |
| vLANManagementPriority This VLAN Priority (0-7) will be included in packets
generated by the management interfaces | scalar | Integer32 | .1.3.6.1.4.1.17713.8.6.8 |
| vLANManagementVIDValidation If enabled, the management interfaces will only respond
to Ethernet packets tagged with the configured VLAN
Management VID, otherwise packets with any VID will be
accepted | scalar | Enumeration | .1.3.6.1.4.1.17713.8.6.9 |