protectionStats
CAMBIUM-PTP800-MIB ·
.1.3.6.1.4.1.17713.8.27
Object
node
No description available.
Context
- MIB
- CAMBIUM-PTP800-MIB
- OID
.1.3.6.1.4.1.17713.8.27- Type
- node
- Parent
- ptp800
- Siblings
- 24
- Children
- 9
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| phyControl | node | - | .1.3.6.1.4.1.17713.8.10 |
| phyStatus | node | - | .1.3.6.1.4.1.17713.8.12 |
| alarms | node | - | .1.3.6.1.4.1.17713.8.13 |
| smtp | node | - | .1.3.6.1.4.1.17713.8.15 |
| snmpControl | node | - | .1.3.6.1.4.1.17713.8.16 |
| sntp | node | - | .1.3.6.1.4.1.17713.8.17 |
| reset | node | - | .1.3.6.1.4.1.17713.8.18 |
| versions | node | - | .1.3.6.1.4.1.17713.8.19 |
| pubStats | node | - | .1.3.6.1.4.1.17713.8.20 |
| encryption | node | - | .1.3.6.1.4.1.17713.8.22 |
| rfu | node | - | .1.3.6.1.4.1.17713.8.23 |
| radioLicense | node | - | .1.3.6.1.4.1.17713.8.24 |
| protectionConfig | node | - | .1.3.6.1.4.1.17713.8.25 |
| protectionStatus | node | - | .1.3.6.1.4.1.17713.8.26 |
| syslogControl | node | - | .1.3.6.1.4.1.17713.8.28 |
| aAAControl | node | - | .1.3.6.1.4.1.17713.8.29 |
| bridge | node | - | .1.3.6.1.4.1.17713.8.4 |
| configuration | node | - | .1.3.6.1.4.1.17713.8.5 |
| ethernet | node | - | .1.3.6.1.4.1.17713.8.6 |
| licence | node | - | .1.3.6.1.4.1.17713.8.8 |
| management | node | - | .1.3.6.1.4.1.17713.8.9 |
| supplementary | node | - | .1.3.6.1.4.1.17713.8.96 |
| ptpGroups | node | - | .1.3.6.1.4.1.17713.8.98 |
| ptpTraps | node | - | .1.3.6.1.4.1.17713.8.99 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| activeCodeWordCount The Active Code Word Count reports the number of code
words received over the wireless interface whilst the CMU
/ RFU is in the Active role of a 1+1 Hot Standby
configuration. … | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.17713.8.27.1 |
| activeCodeWordErrorCount The Active Code Word Error Count reports the number of
code word errors which have been detected at the wireless
interface whilst the CMU / RFU is in the Active role of a
1+1 H… | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.17713.8.27.2 |
| activeByteCount The Active Byte Count reports the number of bytes
received over the wireless interface whilst the CMU / RFU
is in the Active role of a 1+1 Hot Standby configuration.
The count … | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.17713.8.27.3 |
| activeByteErrorCount The Active Byte Error Count reports the number of byte
errors which have been detected at the wireless interface
whilst the CMU / RFU is in the Active role of a 1+1 Hot
Standby… | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.17713.8.27.4 |
| activeAvailableTime The Active Available Time reports the time which the
Wireless Link Status has been Up whilst the CMU/RFU has
been in the Active role of a 1+1 Hot Standby
configuration. The rep… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.8.27.5 |
| activeCounterMeasurementPeriod For a 1+1 Hot Standby link, the elapsed time that the
Protection State of the unit has been in the active state
since the last reset of the system counters. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.8.27.6 |
| activeWirelessLinkAvailability For a 1+1 Hot Standby link, the percentage of time that
the unit has been able to successfully demodulate the
signal transmitted from the remote end of the link whilst
the Prot… | scalar | Integer32 | .1.3.6.1.4.1.17713.8.27.7 |
| activeCodeWordErrorRatio The wireless link sends data in error correctable blocks
called code words. For a 1+1 Hot Standby link, this
attribute reports the ratio of uncorrected code words to
the total … | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.17713.8.27.8 |
| activeByteErrorRatio For a 1+1 Hot Standby link, the Byte Error Ratio
measured by the unit whilst the Protecion State has been
active. This ratio is not updated whilst the Protection
State is inact… | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.17713.8.27.9 |