maximumTransmitPower
CAMBIUM-PTP800-MIB ·
.1.3.6.1.4.1.17713.8.5.6
Object
scalar
Integer32
Maximum transmit power the wireless unit is permitted to use when establishing and maintaining the wireless link, expressed in tenths of a dBm. Note that when an IRFU is connected rather than an ODU, the transmit power refers to the power at the transceiver output and not the IRFU antenna port. See the User Guide for more details
Context
- MIB
- CAMBIUM-PTP800-MIB
- OID
.1.3.6.1.4.1.17713.8.5.6- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- configuration
- Siblings
- 21
Syntax
Integer32
Values & Constraints
Object Constraints
range: -1000-370
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| iPv4Address Internet protocol (IPv4) address. This address is used
by the family of Internet protocols to uniquely identify
the unit on a network. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.8.5.1 |
| remoteIPAddress IP Address of the peer wireless unit | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.8.5.12 |
| remoteMACAddress MAC Address of the peer wireless unit | scalar | OctetString | .1.3.6.1.4.1.17713.8.5.13 |
| enableTransmission Permits the transmitter to radiate. Once the unit is
installed and configured, use this to enable the
transmitter | scalar | Enumeration | .1.3.6.1.4.1.17713.8.5.14 |
| aTPCEnable Enables Automatic Transmitter Power Control (ATPC).
NOTE: Use of ATPC is mandatory in some regions. When ATPC
is enabled, the transmit power is dynamically adjusted to
optimize… | scalar | Enumeration | .1.3.6.1.4.1.17713.8.5.15 |
| iFCableLength IF Cable Length in cm - please refer to the user manual
for more information on the recommended cable type. | scalar | Integer32 | .1.3.6.1.4.1.17713.8.5.16 |
| linkName Name of the PTP link allocated by the System
Administrator. Used to establish a connection with the
correct PTP wireless unit at the other end of the link.
NOTE: The link name … | scalar | OctetString | .1.3.6.1.4.1.17713.8.5.17 |
| siteName This field is allocated by the system administrator and
contains a description of the site name together with any
additional notes | scalar | OctetString | .1.3.6.1.4.1.17713.8.5.18 |
| diverseAntennaGain Diverse Antenna Receive Gain. Expressed in 10ths of
dBi. | scalar | Integer32 | .1.3.6.1.4.1.17713.8.5.19 |
| subnetMask A subnet allows the flow of network traffic between
hosts to be segregated based on a network configuration.
By organizing hosts into logical groups, subnetting can
improve net… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.8.5.2 |
| diverseRfFeederLoss Insertion loss of the microwave connection between the
RFU and the diverse antenna. Expressed in 10ths of dB. | scalar | Integer32 | .1.3.6.1.4.1.17713.8.5.20 |
| iPv6Address Internet protocol (IPv6) address. This address is used
by the family of Internet protocols to uniquely identify
the unit on a network. | scalar | OctetString | .1.3.6.1.4.1.17713.8.5.21 |
| iPVersion IP protocol selection. Choice of IPv4, IPv6 or Dual. | scalar | Enumeration | .1.3.6.1.4.1.17713.8.5.22 |
| iPv6AutoConfiguredLinkLocalAddress The auto configured link local IPv6 address | scalar | OctetString | .1.3.6.1.4.1.17713.8.5.23 |
| iPv6PrefixLength IPv6 prefix length | scalar | Integer32 | .1.3.6.1.4.1.17713.8.5.24 |
| iPv6GatewayAddress The IPv6 address of a device on the current network that
is currently acting as an IPv6 network gateway. A gateway
acts as an entrance / exit to packets from / to other
network… | scalar | OctetString | .1.3.6.1.4.1.17713.8.5.25 |
| remoteInternetAddressType The type of Internet address specified by the associated
remoteInternetAddressType. | scalar | Enumeration | .1.3.6.1.4.1.17713.8.5.26 |
| remoteInternetAddress INET address used to identify the peer wireless unit | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.17713.8.5.27 |
| gatewayIPAddress The IPv4 address of a device on the current network that
acts as an IPv4 network gateway. A gateway acts as an
entrance / exit to packets from / to other networks. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.8.5.3 |
| antennaGain Antenna Gain. Expressed in 10ths of dBi. | scalar | Integer32 | .1.3.6.1.4.1.17713.8.5.7 |
| rFFeederLoss Insertion loss of the microwave connection between the
RFU and the antenna. The feeder loss should be 0 dB for
the standard 1 + 0 direct mount configuration. Expressed
in 10ths… | scalar | Integer32 | .1.3.6.1.4.1.17713.8.5.8 |