linkName
CAMBIUM-PTP800-MIB ·
.1.3.6.1.4.1.17713.8.5.17
Object
scalar
OctetString
Name of the PTP link allocated by the System Administrator. Used to establish a connection with the correct PTP wireless unit at the other end of the link. NOTE: The link name MUST be the same at both ends of the PTP link.
Context
- MIB
- CAMBIUM-PTP800-MIB
- OID
.1.3.6.1.4.1.17713.8.5.17- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- configuration
- Siblings
- 21
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-63
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| iPv4Address Internet protocol (IPv4) address. This address is used
by the family of Internet protocols to uniquely identify
the unit on a network. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.8.5.1 |
| remoteIPAddress IP Address of the peer wireless unit | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.8.5.12 |
| remoteMACAddress MAC Address of the peer wireless unit | scalar | OctetString | .1.3.6.1.4.1.17713.8.5.13 |
| enableTransmission Permits the transmitter to radiate. Once the unit is
installed and configured, use this to enable the
transmitter | scalar | Enumeration | .1.3.6.1.4.1.17713.8.5.14 |
| aTPCEnable Enables Automatic Transmitter Power Control (ATPC).
NOTE: Use of ATPC is mandatory in some regions. When ATPC
is enabled, the transmit power is dynamically adjusted to
optimize… | scalar | Enumeration | .1.3.6.1.4.1.17713.8.5.15 |
| iFCableLength IF Cable Length in cm - please refer to the user manual
for more information on the recommended cable type. | scalar | Integer32 | .1.3.6.1.4.1.17713.8.5.16 |
| siteName This field is allocated by the system administrator and
contains a description of the site name together with any
additional notes | scalar | OctetString | .1.3.6.1.4.1.17713.8.5.18 |
| diverseAntennaGain Diverse Antenna Receive Gain. Expressed in 10ths of
dBi. | scalar | Integer32 | .1.3.6.1.4.1.17713.8.5.19 |
| subnetMask A subnet allows the flow of network traffic between
hosts to be segregated based on a network configuration.
By organizing hosts into logical groups, subnetting can
improve net… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.8.5.2 |
| diverseRfFeederLoss Insertion loss of the microwave connection between the
RFU and the diverse antenna. Expressed in 10ths of dB. | scalar | Integer32 | .1.3.6.1.4.1.17713.8.5.20 |
| iPv6Address Internet protocol (IPv6) address. This address is used
by the family of Internet protocols to uniquely identify
the unit on a network. | scalar | OctetString | .1.3.6.1.4.1.17713.8.5.21 |
| iPVersion IP protocol selection. Choice of IPv4, IPv6 or Dual. | scalar | Enumeration | .1.3.6.1.4.1.17713.8.5.22 |
| iPv6AutoConfiguredLinkLocalAddress The auto configured link local IPv6 address | scalar | OctetString | .1.3.6.1.4.1.17713.8.5.23 |
| iPv6PrefixLength IPv6 prefix length | scalar | Integer32 | .1.3.6.1.4.1.17713.8.5.24 |
| iPv6GatewayAddress The IPv6 address of a device on the current network that
is currently acting as an IPv6 network gateway. A gateway
acts as an entrance / exit to packets from / to other
network… | scalar | OctetString | .1.3.6.1.4.1.17713.8.5.25 |
| remoteInternetAddressType The type of Internet address specified by the associated
remoteInternetAddressType. | scalar | Enumeration | .1.3.6.1.4.1.17713.8.5.26 |
| remoteInternetAddress INET address used to identify the peer wireless unit | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.17713.8.5.27 |
| gatewayIPAddress The IPv4 address of a device on the current network that
acts as an IPv4 network gateway. A gateway acts as an
entrance / exit to packets from / to other networks. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.8.5.3 |
| maximumTransmitPower Maximum transmit power the wireless unit is permitted to
use when establishing and maintaining the wireless link,
expressed in tenths of a dBm. Note that when an IRFU is
connec… | scalar | Integer32 | .1.3.6.1.4.1.17713.8.5.6 |
| antennaGain Antenna Gain. Expressed in 10ths of dBi. | scalar | Integer32 | .1.3.6.1.4.1.17713.8.5.7 |
| rFFeederLoss Insertion loss of the microwave connection between the
RFU and the antenna. The feeder loss should be 0 dB for
the standard 1 + 0 direct mount configuration. Expressed
in 10ths… | scalar | Integer32 | .1.3.6.1.4.1.17713.8.5.8 |