iFCableLength

CAMBIUM-PTP800-MIB · .1.3.6.1.4.1.17713.8.5.16
MIB view Table view

Object

scalar Integer32 
IF Cable Length in cm - please refer to the user manual 
for more information on the recommended cable type.

Context

MIB
CAMBIUM-PTP800-MIB
OID
.1.3.6.1.4.1.17713.8.5.16
Type
scalar
Access
readonly
Status
current
Parent
configuration
Siblings
21

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-19000

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
iPv4Address
Internet protocol (IPv4) address. This address is used by the family of Internet protocols to uniquely identify the unit on a network.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.17713.8.5.1
remoteIPAddress
IP Address of the peer wireless unit
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.17713.8.5.12
remoteMACAddress
MAC Address of the peer wireless unit
scalarOctetString.1.3.6.1.4.1.17713.8.5.13
enableTransmission
Permits the transmitter to radiate. Once the unit is installed and configured, use this to enable the transmitter
scalarEnumeration.1.3.6.1.4.1.17713.8.5.14
aTPCEnable
Enables Automatic Transmitter Power Control (ATPC). NOTE: Use of ATPC is mandatory in some regions. When ATPC is enabled, the transmit power is dynamically adjusted to optimize…
scalarEnumeration.1.3.6.1.4.1.17713.8.5.15
linkName
Name of the PTP link allocated by the System Administrator. Used to establish a connection with the correct PTP wireless unit at the other end of the link. NOTE: The link name …
scalarOctetString.1.3.6.1.4.1.17713.8.5.17
siteName
This field is allocated by the system administrator and contains a description of the site name together with any additional notes
scalarOctetString.1.3.6.1.4.1.17713.8.5.18
diverseAntennaGain
Diverse Antenna Receive Gain. Expressed in 10ths of dBi.
scalarInteger32.1.3.6.1.4.1.17713.8.5.19
subnetMask
A subnet allows the flow of network traffic between hosts to be segregated based on a network configuration. By organizing hosts into logical groups, subnetting can improve net…
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.17713.8.5.2
diverseRfFeederLoss
Insertion loss of the microwave connection between the RFU and the diverse antenna. Expressed in 10ths of dB.
scalarInteger32.1.3.6.1.4.1.17713.8.5.20
iPv6Address
Internet protocol (IPv6) address. This address is used by the family of Internet protocols to uniquely identify the unit on a network.
scalarOctetString.1.3.6.1.4.1.17713.8.5.21
iPVersion
IP protocol selection. Choice of IPv4, IPv6 or Dual.
scalarEnumeration.1.3.6.1.4.1.17713.8.5.22
iPv6AutoConfiguredLinkLocalAddress
The auto configured link local IPv6 address
scalarOctetString.1.3.6.1.4.1.17713.8.5.23
iPv6PrefixLength
IPv6 prefix length
scalarInteger32.1.3.6.1.4.1.17713.8.5.24
iPv6GatewayAddress
The IPv6 address of a device on the current network that is currently acting as an IPv6 network gateway. A gateway acts as an entrance / exit to packets from / to other network…
scalarOctetString.1.3.6.1.4.1.17713.8.5.25
remoteInternetAddressType
The type of Internet address specified by the associated remoteInternetAddressType.
scalarEnumeration.1.3.6.1.4.1.17713.8.5.26
remoteInternetAddress
INET address used to identify the peer wireless unit
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.17713.8.5.27
gatewayIPAddress
The IPv4 address of a device on the current network that acts as an IPv4 network gateway. A gateway acts as an entrance / exit to packets from / to other networks.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.17713.8.5.3
maximumTransmitPower
Maximum transmit power the wireless unit is permitted to use when establishing and maintaining the wireless link, expressed in tenths of a dBm. Note that when an IRFU is connec…
scalarInteger32.1.3.6.1.4.1.17713.8.5.6
antennaGain
Antenna Gain. Expressed in 10ths of dBi.
scalarInteger32.1.3.6.1.4.1.17713.8.5.7
rFFeederLoss
Insertion loss of the microwave connection between the RFU and the antenna. The feeder loss should be 0 dB for the standard 1 + 0 direct mount configuration. Expressed in 10ths…
scalarInteger32.1.3.6.1.4.1.17713.8.5.8