hTTPSAccessEnabled
CAMBIUM-PTP800-MIB ·
.1.3.6.1.4.1.17713.8.9.17
Object
scalar
Enumeration
This controls whether or not HTTPS access is enabled, i.e. if this is disabled (0) then the unit will not respond to any requests on the configured HTTPS Port Number. Remote management via HTTP is not affected by this setting. Any change in this setting will not take effect until the unit has been rebooted. (Factory default = Enabled)
Context
- MIB
- CAMBIUM-PTP800-MIB
- OID
.1.3.6.1.4.1.17713.8.9.17- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- management
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | no |
1 | yes |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tFTPSoftwareUpgradeStatusText Descriptive text describing the status of the TFTP
Software upgrade process, including any error details | scalar | OctetString | .1.3.6.1.4.1.17713.8.9.10 |
| tFTPSoftwareUpgradeStatusAdditionalText Any additional text describing the status of the TFTP
Software upgrade process, including any error details | scalar | OctetString | .1.3.6.1.4.1.17713.8.9.11 |
| hTTPAccessEnabled This controls whether or not HTTP access is enabled,
i.e. if this is disabled (0) then the unit will not
respond to any requests on the HTTP port. Remote
management via HTTPS i… | scalar | Enumeration | .1.3.6.1.4.1.17713.8.9.12 |
| telnetAccessEnabled This controls whether or not Telnet access is enabled,
i.e. if this is disabled (0) then the unit will not
respond to any requests on the TELNET port. Any change in
this settin… | scalar | Enumeration | .1.3.6.1.4.1.17713.8.9.13 |
| hTTPPortNumber This controls the port number for HTTP access. A value
of zero will use the default port number. Any change in
this setting will not take effect until the unit has been
reboote… | scalar | Integer32 | .1.3.6.1.4.1.17713.8.9.14 |
| hTTPSPortNumber This controls the port number for HTTPS access. A value
of zero will use the default port number. Availability of
HTTPS is controlled via the Licence Key. Any change in
this se… | scalar | Integer32 | .1.3.6.1.4.1.17713.8.9.15 |
| telnetPortNumber This controls the port number for TELNET access. A value
of zero will use the default port number. Any change in
this setting will not take effect until the unit has been
reboo… | scalar | Integer32 | .1.3.6.1.4.1.17713.8.9.16 |
| tFTPServerInternetAddressType The type of Internet address specified by the associated
tFTPServerInternetAddress. | scalar | Enumeration | .1.3.6.1.4.1.17713.8.9.18 |
| tFTPServerInternetAddress INET address of the TFTP Server from which the TFTP
Software Upgrade File Name will be retrieved | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.17713.8.9.19 |
| linkNameMismatch Signaling was received with the wrong Link Name. Either
the Link Name is configured differently at each end of
the wireless link, or this unit is aligned to the wrong
link part… | scalar | Enumeration | .1.3.6.1.4.1.17713.8.9.3 |
| alignmentMode Indicates if the unit is undergoing alignment. NB: a
change of state during operation may generate an SNMP
trap and/or SMTP email alert | scalar | Enumeration | .1.3.6.1.4.1.17713.8.9.4 |
| tFTPServerIPAddress IP address of the TFTP Server from which the TFTP
Software Upgrade File Name will be retrieved | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.8.9.5 |
| tFTPServerPortNumber The port number of the TFTP Server from which the TFTP
Software Upgrade File Name will be retrieved | scalar | Integer32 | .1.3.6.1.4.1.17713.8.9.6 |
| tFTPSoftwareUpgradeFileName Filename of the Software Upgrade to be loaded from the
TFTP Server | scalar | OctetString | .1.3.6.1.4.1.17713.8.9.7 |
| tFTPStartSoftwareUpgrade Write '1' to this attribute to start the TFTP software
upgrade process. The attribute will be reset to 0 when
the upgrade process has finished | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.8.9.8 |
| tFTPSoftwareUpgradeStatus The current status of the TFTP Software upgrade process | scalar | Enumeration | .1.3.6.1.4.1.17713.8.9.9 |