enableTransmission

CAMBIUM-PTP800-MIB · .1.3.6.1.4.1.17713.8.5.14
MIB view Table view

Object

scalar r/w Enumeration 
Permits the transmitter to radiate. Once the unit is 
installed and configured, use this to enable the 
transmitter

Context

MIB
CAMBIUM-PTP800-MIB
OID
.1.3.6.1.4.1.17713.8.5.14
Type
scalar
Access
readwrite
Status
current
Parent
configuration
Siblings
21

Syntax

Enumeration

Values & Constraints

Enumerated Values
0enabled
1muted

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
iPv4Address
Internet protocol (IPv4) address. This address is used by the family of Internet protocols to uniquely identify the unit on a network.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.17713.8.5.1
remoteIPAddress
IP Address of the peer wireless unit
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.17713.8.5.12
remoteMACAddress
MAC Address of the peer wireless unit
scalarOctetString.1.3.6.1.4.1.17713.8.5.13
aTPCEnable
Enables Automatic Transmitter Power Control (ATPC). NOTE: Use of ATPC is mandatory in some regions. When ATPC is enabled, the transmit power is dynamically adjusted to optimize…
scalarEnumeration.1.3.6.1.4.1.17713.8.5.15
iFCableLength
IF Cable Length in cm - please refer to the user manual for more information on the recommended cable type.
scalarInteger32.1.3.6.1.4.1.17713.8.5.16
linkName
Name of the PTP link allocated by the System Administrator. Used to establish a connection with the correct PTP wireless unit at the other end of the link. NOTE: The link name …
scalarOctetString.1.3.6.1.4.1.17713.8.5.17
siteName
This field is allocated by the system administrator and contains a description of the site name together with any additional notes
scalarOctetString.1.3.6.1.4.1.17713.8.5.18
diverseAntennaGain
Diverse Antenna Receive Gain. Expressed in 10ths of dBi.
scalarInteger32.1.3.6.1.4.1.17713.8.5.19
subnetMask
A subnet allows the flow of network traffic between hosts to be segregated based on a network configuration. By organizing hosts into logical groups, subnetting can improve net…
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.17713.8.5.2
diverseRfFeederLoss
Insertion loss of the microwave connection between the RFU and the diverse antenna. Expressed in 10ths of dB.
scalarInteger32.1.3.6.1.4.1.17713.8.5.20
iPv6Address
Internet protocol (IPv6) address. This address is used by the family of Internet protocols to uniquely identify the unit on a network.
scalarOctetString.1.3.6.1.4.1.17713.8.5.21
iPVersion
IP protocol selection. Choice of IPv4, IPv6 or Dual.
scalarEnumeration.1.3.6.1.4.1.17713.8.5.22
iPv6AutoConfiguredLinkLocalAddress
The auto configured link local IPv6 address
scalarOctetString.1.3.6.1.4.1.17713.8.5.23
iPv6PrefixLength
IPv6 prefix length
scalarInteger32.1.3.6.1.4.1.17713.8.5.24
iPv6GatewayAddress
The IPv6 address of a device on the current network that is currently acting as an IPv6 network gateway. A gateway acts as an entrance / exit to packets from / to other network…
scalarOctetString.1.3.6.1.4.1.17713.8.5.25
remoteInternetAddressType
The type of Internet address specified by the associated remoteInternetAddressType.
scalarEnumeration.1.3.6.1.4.1.17713.8.5.26
remoteInternetAddress
INET address used to identify the peer wireless unit
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.17713.8.5.27
gatewayIPAddress
The IPv4 address of a device on the current network that acts as an IPv4 network gateway. A gateway acts as an entrance / exit to packets from / to other networks.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.17713.8.5.3
maximumTransmitPower
Maximum transmit power the wireless unit is permitted to use when establishing and maintaining the wireless link, expressed in tenths of a dBm. Note that when an IRFU is connec…
scalarInteger32.1.3.6.1.4.1.17713.8.5.6
antennaGain
Antenna Gain. Expressed in 10ths of dBi.
scalarInteger32.1.3.6.1.4.1.17713.8.5.7
rFFeederLoss
Insertion loss of the microwave connection between the RFU and the antenna. The feeder loss should be 0 dB for the standard 1 + 0 direct mount configuration. Expressed in 10ths…
scalarInteger32.1.3.6.1.4.1.17713.8.5.8