subnetMask
CAMBIUM-PTP250-MIB ·
.1.3.6.1.4.1.17713.250.1.2
Object
scalar
SNMPv2-SMIIpAddress
A subnet allows the flow of network traffic between hosts to be segregated based on a network configuration. By organizing hosts into logical groups, subnetting can improve network security and performance.
Context
- MIB
- CAMBIUM-PTP250-MIB
- OID
.1.3.6.1.4.1.17713.250.1.2- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- configuration
- Siblings
- 20
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| iPAddress Internet protocol (IP) address. This address is used by
the family of Internet protocols to uniquely identify
the unit on a network. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.250.1.1 |
| remoteIPAddress IP Address of the peer wireless unit | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.250.1.10 |
| linkName Name of the PTP link allocated by the System
Administrator. Used to establish a
connection with the correct PTP wireless unit
at the other end of the link. NOTE: The link name … | scalar | OctetString | .1.3.6.1.4.1.17713.250.1.11 |
| siteName This field contains a user-provided description of the
site name together with any additional notes | scalar | OctetString | .1.3.6.1.4.1.17713.250.1.12 |
| configuredModulationMode The fixed modulation mode or maximum adaptive modulation mode
to be used by the wireless link | scalar | Enumeration | .1.3.6.1.4.1.17713.250.1.13 |
| band The frequency band to be
used by the wireless link | scalar | Enumeration | .1.3.6.1.4.1.17713.250.1.14 |
| configuredRange Configured distance between the two peer wireless units
expressed in hundredths of a kilometer. | scalar | Integer32 | .1.3.6.1.4.1.17713.250.1.15 |
| channelSelection The channels selected for use by the user. The
current channel will be selected from this list. | scalar | Bits | .1.3.6.1.4.1.17713.250.1.16 |
| vlanTagging Whether or not to use VLAN tagging for management. | scalar | Enumeration | .1.3.6.1.4.1.17713.250.1.17 |
| vlanId VLAN ID for management. | scalar | Integer32 | .1.3.6.1.4.1.17713.250.1.18 |
| vlanPriority VLAN priority for management. | scalar | Integer32 | .1.3.6.1.4.1.17713.250.1.19 |
| fixedModMode If disabled, allows automatic modulation mode selection. | scalar | Enumeration | .1.3.6.1.4.1.17713.250.1.22 |
| dualPayload If enabled, allows dual payload modulation modes to be selected. | scalar | Enumeration | .1.3.6.1.4.1.17713.250.1.23 |
| gatewayIPAddress The IP address of a computer on the current network that
is currently acting as a network gateway. A gateway
acts as an entrance / exit to packets from / to
other networks. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.250.1.3 |
| remoteMACAddress MAC address of the PTP wireless unit forming the other
end of the PTP link | scalar | OctetString | .1.3.6.1.4.1.17713.250.1.4 |
| masterSlaveMode The PTP wireless link operates using a master and slave
relationship | scalar | Enumeration | .1.3.6.1.4.1.17713.250.1.5 |
| maximumTransmitPower Maximum transmit power the wireless unit is permitted to
use when establishing and maintaining the wireless
link | scalar | Integer32 | .1.3.6.1.4.1.17713.250.1.6 |
| antennaGain Antenna Gain. Expressed in 10ths of dBi. NB: This
attribute is ignored for variants with an
integral antenna. | scalar | Integer32 | .1.3.6.1.4.1.17713.250.1.7 |
| cableLoss Loss in the cable between the ODU and the antenna.
Expressed in 10ths of dB. NB: This attribute is
ignored for variants with an integral antenna. | scalar | Integer32 | .1.3.6.1.4.1.17713.250.1.8 |
| channelBandwidth The selected bandwidth of the transmit and
receive radio channels | scalar | Enumeration | .1.3.6.1.4.1.17713.250.1.9 |