configuration

CAMBIUM-PTP250-MIB · .1.3.6.1.4.1.17713.250.1
MIB view Table view

Object

node

No description available.

Context

MIB
CAMBIUM-PTP250-MIB
OID
.1.3.6.1.4.1.17713.250.1
Type
node
Parent
ptp250
Siblings
12
Children
21

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
versionsnode-.1.3.6.1.4.1.17713.250.10
pubStatsnode-.1.3.6.1.4.1.17713.250.11
ethernetnode-.1.3.6.1.4.1.17713.250.2
licencenode-.1.3.6.1.4.1.17713.250.3
managementnode-.1.3.6.1.4.1.17713.250.4
phyStatusnode-.1.3.6.1.4.1.17713.250.5
alarmsnode-.1.3.6.1.4.1.17713.250.6
smtpnode-.1.3.6.1.4.1.17713.250.7
snmpControlnode-.1.3.6.1.4.1.17713.250.8
ntpnode-.1.3.6.1.4.1.17713.250.9
ptpGroupsnode-.1.3.6.1.4.1.17713.250.98
ptpTrapsnode-.1.3.6.1.4.1.17713.250.99
Child Objects
ObjectTypeSyntaxOID
iPAddress
Internet protocol (IP) address. This address is used by the family of Internet protocols to uniquely identify the unit on a network.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.17713.250.1.1
remoteIPAddress
IP Address of the peer wireless unit
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.17713.250.1.10
linkName
Name of the PTP link allocated by the System Administrator. Used to establish a connection with the correct PTP wireless unit at the other end of the link. NOTE: The link name …
scalarOctetString.1.3.6.1.4.1.17713.250.1.11
siteName
This field contains a user-provided description of the site name together with any additional notes
scalarOctetString.1.3.6.1.4.1.17713.250.1.12
configuredModulationMode
The fixed modulation mode or maximum adaptive modulation mode to be used by the wireless link
scalarEnumeration.1.3.6.1.4.1.17713.250.1.13
band
The frequency band to be used by the wireless link
scalarEnumeration.1.3.6.1.4.1.17713.250.1.14
configuredRange
Configured distance between the two peer wireless units expressed in hundredths of a kilometer.
scalarInteger32.1.3.6.1.4.1.17713.250.1.15
channelSelection
The channels selected for use by the user. The current channel will be selected from this list.
scalarBits.1.3.6.1.4.1.17713.250.1.16
vlanTagging
Whether or not to use VLAN tagging for management.
scalarEnumeration.1.3.6.1.4.1.17713.250.1.17
vlanId
VLAN ID for management.
scalarInteger32.1.3.6.1.4.1.17713.250.1.18
vlanPriority
VLAN priority for management.
scalarInteger32.1.3.6.1.4.1.17713.250.1.19
subnetMask
A subnet allows the flow of network traffic between hosts to be segregated based on a network configuration. By organizing hosts into logical groups, subnetting can improve net…
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.17713.250.1.2
fixedModMode
If disabled, allows automatic modulation mode selection.
scalarEnumeration.1.3.6.1.4.1.17713.250.1.22
dualPayload
If enabled, allows dual payload modulation modes to be selected.
scalarEnumeration.1.3.6.1.4.1.17713.250.1.23
gatewayIPAddress
The IP address of a computer on the current network that is currently acting as a network gateway. A gateway acts as an entrance / exit to packets from / to other networks.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.17713.250.1.3
remoteMACAddress
MAC address of the PTP wireless unit forming the other end of the PTP link
scalarOctetString.1.3.6.1.4.1.17713.250.1.4
masterSlaveMode
The PTP wireless link operates using a master and slave relationship
scalarEnumeration.1.3.6.1.4.1.17713.250.1.5
maximumTransmitPower
Maximum transmit power the wireless unit is permitted to use when establishing and maintaining the wireless link
scalarInteger32.1.3.6.1.4.1.17713.250.1.6
antennaGain
Antenna Gain. Expressed in 10ths of dBi. NB: This attribute is ignored for variants with an integral antenna.
scalarInteger32.1.3.6.1.4.1.17713.250.1.7
cableLoss
Loss in the cable between the ODU and the antenna. Expressed in 10ths of dB. NB: This attribute is ignored for variants with an integral antenna.
scalarInteger32.1.3.6.1.4.1.17713.250.1.8
channelBandwidth
The selected bandwidth of the transmit and receive radio channels
scalarEnumeration.1.3.6.1.4.1.17713.250.1.9