cnAutoAttachDataDiffAllowed
CAMBIUM-NETWORKS-AUTO-ATTACH-MIB ·
.1.3.6.1.4.1.17713.24.1.1.2
Object
scalar
r/w
Integer32
The number of data discrepancies allowed before applied policy settings are deleted. A data discrepancy occurs when current device identification data differs from the previously received device data used for policy application.
Context
- MIB
- CAMBIUM-NETWORKS-AUTO-ATTACH-MIB
- OID
.1.3.6.1.4.1.17713.24.1.1.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cnAutoAttachObjects
- Siblings
- 30
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-8
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cnAutoAttachService Exports the status of the Auto-Attach service. | scalar | Enumeration | .1.3.6.1.4.1.17713.24.1.1.1 |
| cnAutoAttachPortTable This table contains port-specific data
for the Auto-Attach application. | table | - | .1.3.6.1.4.1.17713.24.1.1.10 |
| cnAutoAttachRuleTable This table contains the rule specifications
for the Auto-Attach application. | table | - | .1.3.6.1.4.1.17713.24.1.1.11 |
| cnAutoAttachActionTable This table contains the action specifications
for the Auto-Attach application. | table | - | .1.3.6.1.4.1.17713.24.1.1.12 |
| cnAutoAttachPolicyTable This table contains the policy specifications
for the Auto-Attach application. | table | - | .1.3.6.1.4.1.17713.24.1.1.13 |
| cnAutoAttachScriptTable This table contains the script definitions
for the Auto-Attach application. | table | - | .1.3.6.1.4.1.17713.24.1.1.14 |
| cnAutoAttachCondensedNbrTable This table contains port-specific condensed
neighbor data used by the Auto-Attach application. | table | - | .1.3.6.1.4.1.17713.24.1.1.15 |
| cnAutoAttachGlobalUplinkData Specifies interfaces to be considered for
VLAN membership updates when VLAN membership
updates are initiated by a policy being
applied to a port.
Uplink interfaces are… | scalar | OctetString | .1.3.6.1.4.1.17713.24.1.1.16 |
| cnAutoAttachAutoVlanStatus When Auto-VLAN is enabled, dynamic PBA rules,
actions and policies can be created and deleted
based on received LLDP frames that contain PBA
TLV data. When disabled, received LLD… | scalar | Enumeration | .1.3.6.1.4.1.17713.24.1.1.17 |
| cnAutoAttachNbrClassTable This table contains neighbor classification
data that is used to support filtering of the
Condensed Neighbor Table data. | table | - | .1.3.6.1.4.1.17713.24.1.1.18 |
| cnAutoAttachDeviceLocalization Specifies the device localization string.
Localization is used by PBA to support
device-specific interpretation of various
PBA components (e.g., actions).
A … | scalar | OctetString | .1.3.6.1.4.1.17713.24.1.1.19 |
| cnAutoAttachMacListFileTable This table contains MAC list file data
for the PBA/Auto-Attach application. | table | - | .1.3.6.1.4.1.17713.24.1.1.20 |
| cnAutoAttachFileDownloadType Specifies the type of PBA data file
to be downloaded. | scalar | Enumeration | .1.3.6.1.4.1.17713.24.1.1.21 |
| cnAutoAttachFileDownloadPath Specifies the path of the PBA data file
to be downloaded to the switch. The target
file name is appended to the download path
for SFTP and SCP transfer modes. | scalar | OctetString | .1.3.6.1.4.1.17713.24.1.1.22 |
| cnAutoAttachFileDownloadTransferMode Specifies the transfer mechanism used to
download a PBA data file to the switch. | scalar | Enumeration | .1.3.6.1.4.1.17713.24.1.1.23 |
| cnAutoAttachFileDownloadFromIpAddrType Specifies the address type of the target
device from which the PBA data file will be
downloaded. Standard address types of IPv4,
IPv6 unicast address and DNS are supported. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.17713.24.1.1.24 |
| cnAutoAttachFileDownloadFromIpvx Address of device from which the PBA data
file will be downloaded. Address format is
dictated by the associated address type. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.17713.24.1.1.25 |
| cnAutoAttachFileDownloadUsername Specifies the user name that is required
for downloading a PBA data file using SFTP
and SCP transfer modes. Ignored for transfer
mode TFTP. | scalar | OctetString | .1.3.6.1.4.1.17713.24.1.1.26 |
| cnAutoAttachFileDownloadPassword Specifies the password that is required
for downloading a PBA data file using SFTP
and SCP transfer modes. Ignored for transfer
mode TFTP. Always returns a zero-length
string wh… | scalar | OctetString | .1.3.6.1.4.1.17713.24.1.1.27 |
| cnAutoAttachAutoVlanServerTrunk When enabled, Auto-VLAN server discovery
causes the interface's port mode to be
updated to 'Trunk', if necessary. | scalar | Enumeration | .1.3.6.1.4.1.17713.24.1.1.28 |
| cnAutoAttachDynamicUplinkSupport When enabled, ports connected to dynamically
detected devices, whose connection is considered
an 'uplink' for PBA dynamic policies (e.g.,
an Auto-VLAN server), are added to the PB… | scalar | Enumeration | .1.3.6.1.4.1.17713.24.1.1.29 |
| cnAutoAttachDeviceDataCompare Specifies the string comparison mode used
for device identification. A setting of
'caseSensitive(1)' indicates the character
case is taken into account when determining
a match. A… | scalar | Enumeration | .1.3.6.1.4.1.17713.24.1.1.3 |
| cnAutoAttachTodTable This table contains the Time-of-Day (ToD)
specifications for the PBA application.
A ToD specification, when associated with a
PBA policy, determines if the policy is
ef… | table | - | .1.3.6.1.4.1.17713.24.1.1.30 |
| cnAutoAttachCondensedNbrHistTable This table contains port-specific condensed
neighbor history data tracked by the Auto-Attach
application. | table | - | .1.3.6.1.4.1.17713.24.1.1.31 |
| cnAutoAttachClearPolicyStats Clears Auto-Attach statistics for all
policies. Setting this attribute to 'true(1)'
clears all counters. The value 'false(2)' is
returned when the attribute is queried. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.17713.24.1.1.4 |
| cnAutoAttachClearInterfaceStats Clears Auto-Attach statistics on all device
interfaces. Setting this attribute to 'true(1)'
clears all counters. The value 'false(2)' is
returned when the attribute is queried. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.17713.24.1.1.5 |
| cnAutoAttachUpdatePortDesc When enabled, the port description is
potentially updated when a PBA policy is
applied to the port. Updates occur only
if the current port description is empty.
The data used for … | scalar | Enumeration | .1.3.6.1.4.1.17713.24.1.1.6 |
| cnAutoAttachRestrictedMacMatch When enabled, additional checks are performed
during evaluation of MAC address-based policies
to ensure that they are only applied to ports
on which only a single MAC address has … | scalar | Enumeration | .1.3.6.1.4.1.17713.24.1.1.7 |
| cnAutoAttachActivePolicyReorder When enabled, definition of a new policy and
existing policy precedence updates cause active
policy re-evaluation to occur. Currently applied
policies, even if they are still ap… | scalar | Enumeration | .1.3.6.1.4.1.17713.24.1.1.8 |
| cnAutoAttachMacPolicyAging When enabled, applied MAC-based policies are
cleared on an interface when the associated
MAC address is aged-out and removed from the
FDB.
When disabled, applied MAC-ba… | scalar | Enumeration | .1.3.6.1.4.1.17713.24.1.1.9 |