cadDownChannelParams
CADANT-CMTS-DOWNCHANNEL-MIB ·
.1.3.6.1.4.1.4998.1.1.15.2.2
Object
node
No description available.
Context
- MIB
- CADANT-CMTS-DOWNCHANNEL-MIB
- OID
.1.3.6.1.4.1.4998.1.1.15.2.2- Type
- node
- Parent
- cadDownchannelMib
- Siblings
- 7
- Children
- 10
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cadIfDownstreamChannelTable This table describes the attributes of downstream
channels (frequency bands). | table | - | .1.3.6.1.4.1.4998.1.1.15.2.1 |
| cadDsOfdmProfExceptionTable This table defines exceptions to profiles on an OFDM channel. | table | - | .1.3.6.1.4.1.4998.1.1.15.2.11 |
| cadIfDsOfdmPowerTable This status table contains the power parameters for a DS
OFDM channel. | table | - | .1.3.6.1.4.1.4998.1.1.15.2.3 |
| cadIfDsOfdmChlTable This table describes the attributes of downstream
OFDM channels. | table | - | .1.3.6.1.4.1.4998.1.1.15.2.5 |
| cadIfDsOfdmChlDataTable This table describes the read-only attributes of
downstream OFDM channels (frequency bands). | table | - | .1.3.6.1.4.1.4998.1.1.15.2.6 |
| cadDsOfdmProfileTable This table defines the profiles assigned to an OFDM channel. | table | - | .1.3.6.1.4.1.4998.1.1.15.2.8 |
| cadDsOfdmProfStatTable This table provides counts and the average bits per Hertz
per OFDM channel per profile. | table | - | .1.3.6.1.4.1.4998.1.1.15.2.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cadDownChannelMaxFrequency This object is used to configure the C4 CMTS to accept maximum downstream
frequency limit that conform with the EuroDOCSIS specifications
(starndard range 112 MHz to 858 MHz), (ex… | scalar | hertz Integer32 | .1.3.6.1.4.1.4998.1.1.15.2.2.1 |
| cadDownChannelVoiceShaping This parameter defines whether downstream voice packets should
be shaped or not. When this this parameter is set to false,
voice packets that do not conform to the policing param… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4998.1.1.15.2.2.10 |
| cadDownChannelMinFrequency This object is used to configure the C4 CMTS to accept minimum downstream
frequency limit that conform with the EuroDOCSIS specifications
(starndard range 112 MHz to 858 MHz), (ex… | scalar | hertz Integer32 | .1.3.6.1.4.1.4998.1.1.15.2.2.2 |
| cadDownChannelAgcEnable Enable Automatic Gain Control on DCAMs. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4998.1.1.15.2.2.3 |
| cadDownChannelOorRecoveryEnable True to enable toggling the Sequence Change Count for a DSID in response to
a CM-STATUS sequence number Out-Of-Range message. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4998.1.1.15.2.2.4 |
| cadDsOfdmOcdDpdPlcInterval How often to send the OCD and DPD messages on a channel over the PLC. | scalar | milliseconds Integer32 | .1.3.6.1.4.1.4998.1.1.15.2.2.5 |
| cadDsOfdmDpdProfAInterval How often to send the DPD messages on a channel using profile A. | scalar | milliseconds Integer32 | .1.3.6.1.4.1.4998.1.1.15.2.2.6 |
| cadDownChannelLsredMinThresh This parameter defines the start of the downstream latency
region where packets are randomly dropped. This value must
be less than or equal to cadDownChannelLsredMaxThresh. | scalar | milliseconds Integer32 | .1.3.6.1.4.1.4998.1.1.15.2.2.7 |
| cadDownChannelLsredMaxThresh This parameter defines the end of the downstream latency
region where packets are randomly dropped. This value must
be greater than or equal to cadDownChannelLsredMinThresh. | scalar | milliseconds Integer32 | .1.3.6.1.4.1.4998.1.1.15.2.2.8 |
| cadDownChannelLsredMaxProb This parameter defines the drop probability of a packet when
its downstream latency is equal to cadDownChannelLsredMaxThresh.
The probability of dropping a packet varies linearly … | scalar | 0.01% Integer32 | .1.3.6.1.4.1.4998.1.1.15.2.2.9 |