nnbundleSrcForwardingAddrSecondary
BUNDLE-MIB ·
.1.3.6.1.4.1.562.73.1.1.1.13.1.1.20
Object
The bundle's secondary or backup destination address. This address will be used only if the primary address uses an ethernet interface and failover is enabled on that interface and the interface goes down. The secondary source forwarding address is an optional parameter, it should be a gateway on the alternate ethernet This parameter is set along with the primary source forwarding address parameter. To unconfigure this parameter a set operation is performed with the value 0.0.0.0 for the primary address, or a primary address is set with no secondary, or both primary and secondary are set to 0.0.0.0
Context
- MIB
- BUNDLE-MIB
- OID
.1.3.6.1.4.1.562.73.1.1.1.13.1.1.20- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- nnbundleTableEntry
- Table
- nnbundleTable
- Siblings
- 34
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nnbundleId bundleId is the identifier of a bundle. To
configure a bundle, this parameter must be
used as the index. This is assigned internally
by the system. Whenever a row creation
nee… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.1 |
| nnbundleDropBes The length of time in seconds that the error
condition Bursty Errored Seconds
(Applicable only for T1 links) exists before a
link is dropped. This parameter can be
configured … | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.10 |
| nnbundleDropBbe The length of time in seconds that the error
condition Threshold for Background Blocked Errors
(Applicable only for E1 links) exists before a
link is dropped. This parameter ca… | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.11 |
| nnbundleDropLofc The length of time in seconds that the error
condition Loss Of Frame Count exists before a
link is dropped. This parameter can be
configured only for multilink bundles and
afte… | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.12 |
| nnbundleDropBpv The length of time in seconds that the error
condition BiPolar Violation exists before a
link is dropped. This parameter can be
configured only for multilink bundles and
after … | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.13 |
| nnbundleDropCss The length of time in seconds that the error
condition Controlled Slip Second exists before a
link is dropped. This parameter can be
configured only for multilink bundles and
a… | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.14 |
| nnbundleDropOof The length of time in seconds that the error
condition Out Of Frame exists before a
link is dropped. This parameter can be
configured only for multilink bundles and
after the … | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.15 |
| nnbundleDropCrc The length of time in seconds that the error
condition Cyclic Redundancy Check exists before a
link is dropped. This parameter can be
configured only for multilink bundles and
… | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.16 |
| nnbundleIpAddr The bundle's source IP address. This is one
of the parameters required to set up IP
multiplexing for a bundle. This parameter
can be configured only when the bundle is
encapsu… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.17 |
| nnbundleSubnetMask This parameter represents the source subnet
mask address. This is one of the parameters
required to set up IP multiplexing for a
bundle. This parameter is set along with the
b… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.18 |
| nnbundleSrcForwardingAddrPrimary The bundle's destination IP address. This is
one of the parameters required to set up IP
multiplexing for a bundle. This parameter can
be configured when the bundle has been
c… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.19 |
| nnbundleName Name of the bundle. To configure a bundle,
this parameter must be set. That is, a
descriptive name should be given to a bundle.
The maximum length of a bundle name is 8
charac… | column | OctetString | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.2 |
| nnbundleRestoreMethod bundleRestoreMethod defines how a dropped
link of a multilink bundle will be restored.
It can be done either manually or
automatically. If the restore mode is
automatic, the p… | column | Enumeration | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.21 |
| nnbundleLinkRestoralTime Error-free time interval (in seconds) that
must pass before a link is automatically
restored. This parameter can be set when the
bundleRestoreMethod is automatic. | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.22 |
| nnbundleStatus bundleStatus shutdowns the bundle. Although
the default is 'enable,' the bundle remains
disabled until all necessary parameters are
present | column | Enumeration | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.23 |
| nnbundleLinkRestore bundleLinkRestore specifies the links to be
restored manually. This parameter is configured
when the value of bundleRestoreMethod is manual.
The user needs to specify the link/… | column | OctetString | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.24 |
| nnbundleNoOfLinks Indicates the number of links configured in
the bundle. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.25 |
| nnbundleTotalBw Indicates the total bandwidth for this bundle.
The bundle bandwidth is the aggregated band-
widths of all the links assigned to a
particular bundle. | column | kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.26 |
| nnbundleRowStatus bundleRowStatus is used to add/delete a row
in the table. Adding or deleting a row
corresponds to creating a bundle or deleting
a bundle. In order to add a row to the bundle
t… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.27 |
| nnbundleIpUnnumbered Name of the bundle. To configure unnumbered,
this parameter must be set.
The maximum length of a bundle name is 8
characters. | column | OctetString | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.28 |
| nnbundleIpMulticast Specifies the Ip multicast operation. | column | Enumeration | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.29 |
| nnbundleContact Name of the person who can be contacted
for information about the bundle. The maximum
length for this parameter is 15 characters.
This parameter can be set after the bundle
is… | column | OctetString | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.3 |
| nnbundleDirectedBcast Enable/disable forwarding of directed broadcasts
on this interface. | column | Enumeration | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.30 |
| nnbundleIcmpUnreachable Enable/disable ICMP destination unreachable messages
on this interface | column | Enumeration | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.31 |
| nnbundleIcmpRedirect Enable/disable ICMP redirect messages on this
on this interface | column | Enumeration | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.32 |
| nnbundleClearCounters Perform a clearing of the counters operation | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.33 |
| nnbundleTrackHoldDownTimer Indicates the tracking hold down timer. | column | Integer32 | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.34 |
| nnbundleDropPackets The number of packets dropped by a WAN interface
when the agent encounters packet drops due to lack of buffer availability for transmission etc. Also, packets may be dro… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.35 |
| nnbundleDescr Brief description of the bundle. The maximum
length of this parameter is 25 characters.
This parameter can be set after the bundle
is named and before the links are assigned. | column | OctetString | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.4 |
| nnbundleEncapsulation Specifies the type of protocol encapsulation
for the bundle. To configure protocol-specific
parameters for a bundle, the bundle must first
be encapsulated with that protocol. T… | column | Enumeration | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.5 |
| nnbundleDropEs The length of time in seconds that the error
condition Errored Seconds exists before a link is
dropped. This parameter can be configured only
for multilink bundles and after th… | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.6 |
| nnbundleDropSes The length of time in seconds that the error
condition Severely Errored Seconds exists
before a link is dropped. This parameter can
be configured only for multilink bundles and … | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.7 |
| nnbundleDropUas The length of time in seconds that the error
condition Unavailable Seconds exists before a
link is dropped. This parameter can be
configured only for multilink bundles and
afte… | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.8 |
| nnbundleDropEev The length of time in seconds that the error
condition ESF Error Events exists before a
link is dropped. This parameter can be
configured only for multilink bundles and
after t… | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.13.1.1.9 |