cmUsCalOffsetResolution
BRCM-CM-ENGINEERING-MIB ·
.1.3.6.1.4.1.4413.2.99.1.1.3.2.3.8
Object
scalar
r/w
hundredth megahertz (10 kHz) Integer32
Controls and reflects the resolution used in the cmUsCalOffsetTable. Changing this value will result in the size of the cmUsCalControlTable being altered.
Context
- MIB
- BRCM-CM-ENGINEERING-MIB
- OID
.1.3.6.1.4.1.4413.2.99.1.1.3.2.3.8- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- hundredth megahertz (10 kHz)
- Parent
- cmEngrUpstreamCalibration
- Siblings
- 14
Syntax
hundredth megahertz (10 kHz) Integer32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmUsCalControlStartPower Controls and reflects the starting power used in the
cmUsCalControlTable. Changing this value will result in the size of
the cmUsCalControlTable being altered. | scalar | dBmV Integer32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.3.1 |
| cmUsCalAmpType Sets the upstream amp that the tables have been calibrated for; it
helps the app warn the user about incorrect configurations. These
values are the same as those found in the H… | scalar | Enumeration | .1.3.6.1.4.1.4413.2.99.1.1.3.2.3.10 |
| cmUsCalAmpGain Controls and reflects the current value of the amplifier gain, an 8
bit hardware value. | scalar | Unsigned32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.3.11 |
| cmUsCalDacAtten Controls and reflects the current value of the DAC attenuator, an 8
bit hardware value. | scalar | Unsigned32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.3.12 |
| cmUsCalTransmitNow When set to cw(1), the device will begin transmitting upstream in
CW mode using the specified amp gain and DAC attenuation values. When
set to bits23(2), the device will begin tr… | scalar | Enumeration | .1.3.6.1.4.1.4413.2.99.1.1.3.2.3.13 |
| cmUsCalControlTablePopulate When set to true(1), the upstream calibration control data will be
loaded into the cmUsCalControlTable. If the table is already
populated, it will be flushed and re-populated. … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.99.1.1.3.2.3.14 |
| cmUsCalDiplexerType Controls and reflects the diplexer type on this board. The primary
effect that this setting has is to control the range of frequencies
used in upstream calibration when operating… | scalar | Enumeration | .1.3.6.1.4.1.4413.2.99.1.1.3.2.3.15 |
| cmUsCalControlEndPower Controls and reflects the ending power used in the
cmUsCalControlTable. Changing this value will result in the size of
the cmUsCalControlTable being altered. | scalar | dBmV Integer32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.3.2 |
| cmUsCalControlResolution Controls and reflects the resolution used in the
cmUsCalControlTable. Changing this value will result in the size of
the cmUsCalControlTable being altered. | scalar | hundredth dBmV Integer32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.3.3 |
| cmUsCalZeroControl If set to true(1), all instances of cmUsCalControlAmpGain and
cmUsCalControlDacAtten in the cmUsCalControlTable will be set to
a value of zero. When read, always returns false. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.99.1.1.3.2.3.4 |
| cmUsCalControlTable A list of control values to be used when calculating upstream
power for this device. | table | - | .1.3.6.1.4.1.4413.2.99.1.1.3.2.3.5 |
| cmUsCalOffsetStartFreq Controls and reflects the starting frequency used in the
cmUsCalOffsetTable. Changing this value will result in the size of
the cmUsCalOffsetTable being altered. | scalar | megahertz Integer32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.3.6 |
| cmUsCalOffsetEndFreq Controls and reflects the ending frequency used in the
cmUsCalOffsetTable. Changing this value will result in the size of
the cmUsCalOffsetTable being altered. | scalar | megahertz Integer32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.3.7 |
| cmUsCalBoardType Sets the board revision that the tables have been calibrated for; it
helps the app warn the user about incorrect configurations (loading a
table that has been calibrated for a di… | scalar | Enumeration | .1.3.6.1.4.1.4413.2.99.1.1.3.2.3.9 |