cmDsCalZeroFineCoefs

BRCM-CM-ENGINEERING-MIB · .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.7

Object

scalar r/w SNMPv2-TCTruthValue

Setting this object to true(1) will result in all writable objects in
the cmDsCalFineCoefTable being set to zero.  Sets to false(2) will be
accepted, but will not result in any action being taken.  Reading
this object always returns false(2).

Context

MIB: BRCM-CM-ENGINEERING-MIB
OID: .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.7
Type: scalar
Access: readwrite
Status: current
Parent: cmEngrDownstreamCalibration
Siblings: 32

Syntax

SNMPv2-TCTruthValue

Source: SNMPv2-TCTruthValue
Base type: Enumeration

Values & Constraints

Type Values

`1`	true
`2`	false

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cmDsCalZeroTunerCoefs Setting this object to true(1) will result in all writable objects in the cmDsCalTunerCoefTable being set to zero. Sets to false(2) will be accepted, but will not result in any a…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.1`
cmDsCalZeroEqCoefs Setting this object to true(1) will result in all writable objects in the cmDsCalEqualizerCoefTable being set to zero. Sets to false(2) will be accepted, but will not result in a…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.10`
cmDsCalNumEqCoefs Controls and reflects the number of equalizer coefficients per downstream frequency in the cmDsCalEqualizerCoefTable. Note that the total number of entries in this table will be …	scalar	Unsigned32	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.11`
cmDsCalEqCoefTable A list of equalizer coeffiencents to be used when calculating downstream power for this device.	table	-	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.12`
cmDsCalNumLDAIxReads Sets the number of times the LDAIx registers will be read before doing the power calculations. It will average the register values.	scalar	Unsigned32	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.13`
cmDsCalLDAIxReadInterval Sets the time (in milliseconds) between each read of the LDAIx registers.	scalar	milliseconds Unsigned32	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.14`
cmDsCalTunerStep Sets the step size (in dBmV) that was used when sampling the tuner table. This influences how the data is interpolated when calculating the tuner gain part of actual power leve…	scalar	hundredth dBmV Unsigned32	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.15`
cmDsCalMasterPowerOffset Sets the master offset power value (in dBmV) for the modem. Each frequency band in the table has an offset power adjustment that is applied to this value when calculating the a…	scalar	hundredth dBmV Integer32	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.16`
cmDsCalCharacterizeNow When set to true(1), the CM will execute its DS characterization routine using the frequency specified by cmDsCalFrequency, and the modulation type specified by cmDsCalModulatio…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.17`
cmDsCalNormalLDAIT Shows the contents of the LDAIT register after executing the 'normal' portion of the CM DS characterization routine.	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.18`
cmDsCalNormalLDAIF Shows the contents of the LDAIF register after executing the 'normal' portion of the CM DS characterization routine.	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.19`
cmDsCalNumTunerCoefs Controls and reflects the number of tuner coefficients per downstream frequency in the cmDsCalTunerCoefTable. Note that the total number of entries in this table will be the valu…	scalar	Unsigned32	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.2`
cmDsCalNormalLDAII Shows the contents of the LDAII register after executing the 'normal' portion of the CM DS characterization routine.	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.20`
cmDsCalFrozenLDAIT Shows the contents of the LDAIT register after executing the 'frozen' portion of the CM DS characterization routine.	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.21`
cmDsCalFrozenLDAIF Shows the contents of the LDAIF register after executing the 'frozen' portion of the CM DS characterization routine.	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.22`
cmDsCalFrozenLDAII Shows the contents of the LDAII register after executing the 'frozen' portion of the CM DS characterization routine.	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.23`
cmDsCalFGainTap Shows the value of the equalizer main tap after executing the F-Gain portion of the CM DS characterization routine.	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.24`
cmDsCalTGainTap Shows the value of the equalizer main tap after executing the T-Gain portion of the CM DS characterization routine.	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.25`
cmDsCalIGainTap Shows the value of the equalizer main tap after executing the I-Gain portion of the CM DS characterization routine.	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.26`
cmDsCalFrequencyError Reports the amount of frequency error in the downstream signal.	scalar	hertz SNMPv2-SMIInteger32	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.27`
cmDsCalTunerCoefTablePopulate When set to true(1), the downstream tuner coefficient data will be loaded into the cmDsCalTunerCoefTable. If the table is already populated, it will be flushed and re-populated…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.28`
cmDsCalIFCoefTablePopulate When set to true(1), the downstream intermediate frequency coefficient data will be loaded into the cmDsCalIFCoefTable. If the table is already populated, it will be flushed an…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.29`
cmDsCalTunerCoefTable A list of tuner coeffiencents to be used when calculating downstream power for this device.	table	-	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.3`
cmDsCalFineCoefTablePopulate When set to true(1), the downstream fine coefficient data will be loaded into the cmDsCalFineCoefTable. If the table is already populated, it will be flushed and re-populated. …	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.30`
cmDsCalEqCoefTablePopulate When set to true(1), the downstream equalizer coefficient data will be loaded into the cmDsCalEqCoefTable. If the table is already populated, it will be flushed and re-populate…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.31`
cmDsCalTunerTable A table used to control all tuners present on this device.	table	-	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.32`
cmDsCalPhyTable A table which allows control over each individual downstream phy block present on the device.	table	-	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33`
cmDsCalZeroIFCoefs Setting this object to true(1) will result in all writable objects in the cmDsCalIFCoefTable being set to zero. Sets to false(2) will be accepted, but will not result in any acti…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.4`
cmDsCalNumIFCoefs Controls and reflects the number of IF coefficients per downstream frequency in the cmDsCalIFCoefTable. Note that the total number of entries in this table will be the value of c…	scalar	Unsigned32	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.5`
cmDsCalIFCoefTable A list of intermediate frequency coeffiencents to be used when calculating downstream power for this device.	table	-	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.6`
cmDsCalNumFineCoefs Controls and reflects the number of Fine coefficients per downstream frequency in the cmDsCalFineCoefTable. Note that the total number of entries in this table will be the value …	scalar	Unsigned32	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.8`
cmDsCalFineCoefTable A list of Fine coeffiencents to be used when calculating downstream power for this device.	table	-	`.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.9`

Indexes