cmDsCalTunerStep
BRCM-CM-ENGINEERING-MIB ·
.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.15
Object
scalar
r/w
hundredth dBmV Unsigned32
Sets the step size (in dBmV) that was used when sampling the tuner table. This influences how the data is interpolated when calculating the tuner gain part of actual power level.
Context
- MIB
- BRCM-CM-ENGINEERING-MIB
- OID
.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.15- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- hundredth dBmV
- Parent
- cmEngrDownstreamCalibration
- Siblings
- 32
Syntax
hundredth dBmV Unsigned32
Values & Constraints
Object Constraints
range: 0-800
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmDsCalZeroTunerCoefs Setting this object to true(1) will result in all writable objects in
the cmDsCalTunerCoefTable being set to zero. Sets to false(2) will be
accepted, but will not result in any a… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.1 |
| cmDsCalZeroEqCoefs Setting this object to true(1) will result in all writable objects in
the cmDsCalEqualizerCoefTable being set to zero. Sets to false(2) will be
accepted, but will not result in a… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.10 |
| cmDsCalNumEqCoefs Controls and reflects the number of equalizer coefficients per downstream
frequency in the cmDsCalEqualizerCoefTable. Note that the total number
of entries in this table will be … | scalar | Unsigned32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.11 |
| cmDsCalEqCoefTable A list of equalizer coeffiencents to be used when calculating downstream
power for this device. | table | - | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.12 |
| cmDsCalNumLDAIxReads Sets the number of times the LDAIx registers will be read before doing
the power calculations. It will average the register values. | scalar | Unsigned32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.13 |
| cmDsCalLDAIxReadInterval Sets the time (in milliseconds) between each read of the LDAIx
registers. | scalar | milliseconds Unsigned32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.14 |
| cmDsCalMasterPowerOffset Sets the master offset power value (in dBmV) for the modem. Each
frequency band in the table has an offset power adjustment that is
applied to this value when calculating the a… | scalar | hundredth dBmV Integer32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.16 |
| cmDsCalCharacterizeNow When set to true(1), the CM will execute its DS characterization
routine using the frequency specified by cmDsCalFrequency, and the
modulation type specified by cmDsCalModulatio… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.17 |
| cmDsCalNormalLDAIT Shows the contents of the LDAIT register after executing the 'normal'
portion of the CM DS characterization routine. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.18 |
| cmDsCalNormalLDAIF Shows the contents of the LDAIF register after executing the 'normal'
portion of the CM DS characterization routine. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.19 |
| cmDsCalNumTunerCoefs Controls and reflects the number of tuner coefficients per downstream
frequency in the cmDsCalTunerCoefTable. Note that the total number
of entries in this table will be the valu… | scalar | Unsigned32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.2 |
| cmDsCalNormalLDAII Shows the contents of the LDAII register after executing the 'normal'
portion of the CM DS characterization routine. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.20 |
| cmDsCalFrozenLDAIT Shows the contents of the LDAIT register after executing the 'frozen'
portion of the CM DS characterization routine. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.21 |
| cmDsCalFrozenLDAIF Shows the contents of the LDAIF register after executing the 'frozen'
portion of the CM DS characterization routine. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.22 |
| cmDsCalFrozenLDAII Shows the contents of the LDAII register after executing the 'frozen'
portion of the CM DS characterization routine. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.23 |
| cmDsCalFGainTap Shows the value of the equalizer main tap after executing the F-Gain
portion of the CM DS characterization routine. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.24 |
| cmDsCalTGainTap Shows the value of the equalizer main tap after executing the T-Gain
portion of the CM DS characterization routine. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.25 |
| cmDsCalIGainTap Shows the value of the equalizer main tap after executing the I-Gain
portion of the CM DS characterization routine. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.26 |
| cmDsCalFrequencyError Reports the amount of frequency error in the downstream signal. | scalar | hertz SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.27 |
| cmDsCalTunerCoefTablePopulate When set to true(1), the downstream tuner coefficient data will be
loaded into the cmDsCalTunerCoefTable. If the table is already
populated, it will be flushed and re-populated… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.28 |
| cmDsCalIFCoefTablePopulate When set to true(1), the downstream intermediate frequency coefficient
data will be loaded into the cmDsCalIFCoefTable. If the table is
already populated, it will be flushed an… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.29 |
| cmDsCalTunerCoefTable A list of tuner coeffiencents to be used when calculating downstream
power for this device. | table | - | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.3 |
| cmDsCalFineCoefTablePopulate When set to true(1), the downstream fine coefficient data will be
loaded into the cmDsCalFineCoefTable. If the table is already
populated, it will be flushed and re-populated. … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.30 |
| cmDsCalEqCoefTablePopulate When set to true(1), the downstream equalizer coefficient data will be
loaded into the cmDsCalEqCoefTable. If the table is already
populated, it will be flushed and re-populate… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.31 |
| cmDsCalTunerTable A table used to control all tuners present on this device. | table | - | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.32 |
| cmDsCalPhyTable A table which allows control over each individual downstream phy
block present on the device. | table | - | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33 |
| cmDsCalZeroIFCoefs Setting this object to true(1) will result in all writable objects in
the cmDsCalIFCoefTable being set to zero. Sets to false(2) will be
accepted, but will not result in any acti… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.4 |
| cmDsCalNumIFCoefs Controls and reflects the number of IF coefficients per downstream
frequency in the cmDsCalIFCoefTable. Note that the total number
of entries in this table will be the value of c… | scalar | Unsigned32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.5 |
| cmDsCalIFCoefTable A list of intermediate frequency coeffiencents to be used when
calculating downstream power for this device. | table | - | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.6 |
| cmDsCalZeroFineCoefs Setting this object to true(1) will result in all writable objects in
the cmDsCalFineCoefTable being set to zero. Sets to false(2) will be
accepted, but will not result in any ac… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.7 |
| cmDsCalNumFineCoefs Controls and reflects the number of Fine coefficients per downstream
frequency in the cmDsCalFineCoefTable. Note that the total number
of entries in this table will be the value … | scalar | Unsigned32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.8 |
| cmDsCalFineCoefTable A list of Fine coeffiencents to be used when calculating downstream
power for this device. | table | - | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.9 |