cmDsCalPhyFrequencyError
BRCM-CM-ENGINEERING-MIB ·
.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33.1.11
Object
Reports the frequency error for this phy. The actual frequency to which the phy is locked will be the sum of the value of this object and cmDsCalPhyFrequency. If cmDsCalPhyLockNow has not been set to true(1) then this object will report a value of 0.
Context
- MIB
- BRCM-CM-ENGINEERING-MIB
- OID
.1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33.1.11- Type
- column
- Access
- readonly
- Status
- current
- Units
- hertz
- Parent
- cmDsCalPhyEntry
- Table
- cmDsCalPhyTable
- Siblings
- 11
Syntax
hertz SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmDsCalPhyIndex Identifies the instance of this phy block. | column | Integer32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33.1.1 |
| cmDsCalPhyFrequency Reports the frequency to which this phy is locked. The value of this
object will reflect the frequency as calculated according to the
settings of cmDsCalPhyTuner and cmDsCalPhyT… | column | hertz SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33.1.10 |
| cmDsCalPhySymbolRate Reports the downstream symbol rate for this phy. If cmDsCalPhyLockNow
has not been set to true(1) then this object will report a value of 0. | column | symbols per second SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33.1.12 |
| cmDsCalPhyTuner Controls which tuner from the cmDsCalTunerTable this phy is mapped to. | column | Integer32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33.1.2 |
| cmDsCalPhyTunerChannel Controls which channel of the tuner identified by cmDsCalPhyTuner is
mapped to this phy. Values are defined as offsets from the center
channel of the tuner, which is represented… | column | Integer32 | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33.1.3 |
| cmDsCalPhyModulation The modulation type that the CM will attempt to lock under
when cmDsCalPhyLockNow is set to true. Note that a read of
this object does NOT necessarily indicate that the CM is
cu… | column | Enumeration | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33.1.4 |
| cmDsCalPhyLockNow When this object is set to true(1), the CM will attempt to lock the
downstream phy according to the parameters specified by the values of
cmDsCalTunerCenterFrequency, cmDsCalPhyTu… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33.1.5 |
| cmDsCalPhyQamLocked Indicates whether the last set of cmDsCalPhyLockNow to true resulted
in the phy acheiving QAM lock. The value of this object is reset
whenever cmDsCalPhyLockNow is set to true,… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33.1.6 |
| cmDsCalPhyFecLocked Indicates whether the last set of cmDsCalPhyLockNow to true resulted
in the phy acheiving FEC lock. The value of this object is reset
whenever cmDsCalPhyLockNow is set to true,… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33.1.7 |
| cmDsCalPhySignalNoise Signal/Noise ratio as perceived for this phy. | column | TenthdB DOCS-IF-MIBTenthdB | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33.1.8 |
| cmDsCalPhyPower The received power level for this phy. | column | dBmV DOCS-IF-MIBTenthdBmV | .1.3.6.1.4.1.4413.2.99.1.1.3.2.2.33.1.9 |