battChargerState
BRCM-BATTERY-MGMT-MIB ·
.1.3.6.1.4.1.4413.2.2.2.1.10.2.4
Object
scalar
Enumeration
The current state of the battery charger. Note that all states may not be supported on all types of chargers.
Context
- MIB
- BRCM-BATTERY-MGMT-MIB
- OID
.1.3.6.1.4.1.4413.2.2.2.1.10.2.4- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- batteryCharger
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | initializing |
2 | idle |
3 | sleep |
4 | chargeInit |
5 | preQualification |
6 | fastCharge |
7 | trickleCharge |
8 | topOff |
9 | discharge |
10 | forcedDischarge |
11 | eternalSleep |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| battChargerMicrocodeVersion The version of the battery charger microcode. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4413.2.2.2.1.10.2.1 |
| battChargerLifeTestInterval Specifies the number of days between periodic life tests (default = 180).
If the charger does not support periodic life testing then this object
will not be supported. | scalar | Unsigned32 | .1.3.6.1.4.1.4413.2.2.2.1.10.2.10 |
| battChargerLifeTestEnable Specifies whether or not periodic life testing is enabled. If the charger
does not support periodic life testing then this object will not be supported.
Default value is FALSE. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.2.2.1.10.2.11 |
| battChargerLifeTestTOD Specifies the time of day (hh:mm) using a 24-hour clock at which battery
life testing will be scheduled. If the charger does not support periodic
life testing then this object w… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4413.2.2.2.1.10.2.12 |
| battChargerLifeTestStatus Returns the current life test state | scalar | Enumeration | .1.3.6.1.4.1.4413.2.2.2.1.10.2.13 |
| battChargerAbortLifeTest Setting this to TRUE aborts an in-progress life test. Reads always return
FALSE. No effect if a life test is not currently in progress. If the
charger does not support period… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.2.2.1.10.2.14 |
| battChargerMicrocodeBuildTime The build date and time of the battery charger microcode. | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.4413.2.2.2.1.10.2.2 |
| battChargerInputVoltage The most recently measured input voltage to the battery charger.
Typically, if operating on battery power, this value will approach
zero. If operating on utility power, this valu… | scalar | millivolts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4413.2.2.2.1.10.2.3 |
| battChargerMaximumCharge Reports the level to which the charger will charge the batteries. | scalar | percent Unsigned32 | .1.3.6.1.4.1.4413.2.2.2.1.10.2.5 |
| battChargerReplaceBatteryThreshold Specifies the minimum charge percentage that the battery must be able
to reach when charging. If a battery cannot be charged above this
percentage, it will be considered bad and … | scalar | percent Unsigned32 | .1.3.6.1.4.1.4413.2.2.2.1.10.2.6 |
| battChargerLowChargeThreshold Specifies the charge percentage at which the bcmAlarmLowBatteryCharge
will be raised. | scalar | percent Unsigned32 | .1.3.6.1.4.1.4413.2.2.2.1.10.2.7 |
| battChargerHardwareFaultsAllowed Specifies the hardware faults that are currently allowed to affect the
battery subsystem. If the charger does not support hardware faults then
this object will not be supported. … | scalar | HardwareFault | .1.3.6.1.4.1.4413.2.2.2.1.10.2.8 |
| battChargerHardwareFaultsDetected Specifies the hardware faults that are currently active in the battery
subsystem. Writing any valoe to this entry caues ALL faults to be reset.
See bcmAlarmHardwareFault for a d… | scalar | HardwareFault | .1.3.6.1.4.1.4413.2.2.2.1.10.2.9 |