battChargerInputVoltage
BRCM-BATTERY-MGMT-MIB ·
.1.3.6.1.4.1.4413.2.2.2.1.10.2.3
Object
The most recently measured input voltage to the battery charger. Typically, if operating on battery power, this value will approach zero. If operating on utility power, this value will approach the value of the power supplied to the device.
Context
- MIB
- BRCM-BATTERY-MGMT-MIB
- OID
.1.3.6.1.4.1.4413.2.2.2.1.10.2.3- Type
- scalar
- Access
- readonly
- Status
- current
- Units
- millivolts
- Parent
- batteryCharger
- Siblings
- 13
Syntax
millivolts SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| battChargerMicrocodeVersion The version of the battery charger microcode. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4413.2.2.2.1.10.2.1 |
| battChargerLifeTestInterval Specifies the number of days between periodic life tests (default = 180).
If the charger does not support periodic life testing then this object
will not be supported. | scalar | Unsigned32 | .1.3.6.1.4.1.4413.2.2.2.1.10.2.10 |
| battChargerLifeTestEnable Specifies whether or not periodic life testing is enabled. If the charger
does not support periodic life testing then this object will not be supported.
Default value is FALSE. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.2.2.1.10.2.11 |
| battChargerLifeTestTOD Specifies the time of day (hh:mm) using a 24-hour clock at which battery
life testing will be scheduled. If the charger does not support periodic
life testing then this object w… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4413.2.2.2.1.10.2.12 |
| battChargerLifeTestStatus Returns the current life test state | scalar | Enumeration | .1.3.6.1.4.1.4413.2.2.2.1.10.2.13 |
| battChargerAbortLifeTest Setting this to TRUE aborts an in-progress life test. Reads always return
FALSE. No effect if a life test is not currently in progress. If the
charger does not support period… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.2.2.1.10.2.14 |
| battChargerMicrocodeBuildTime The build date and time of the battery charger microcode. | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.4413.2.2.2.1.10.2.2 |
| battChargerState The current state of the battery charger. Note that all states may
not be supported on all types of chargers. | scalar | Enumeration | .1.3.6.1.4.1.4413.2.2.2.1.10.2.4 |
| battChargerMaximumCharge Reports the level to which the charger will charge the batteries. | scalar | percent Unsigned32 | .1.3.6.1.4.1.4413.2.2.2.1.10.2.5 |
| battChargerReplaceBatteryThreshold Specifies the minimum charge percentage that the battery must be able
to reach when charging. If a battery cannot be charged above this
percentage, it will be considered bad and … | scalar | percent Unsigned32 | .1.3.6.1.4.1.4413.2.2.2.1.10.2.6 |
| battChargerLowChargeThreshold Specifies the charge percentage at which the bcmAlarmLowBatteryCharge
will be raised. | scalar | percent Unsigned32 | .1.3.6.1.4.1.4413.2.2.2.1.10.2.7 |
| battChargerHardwareFaultsAllowed Specifies the hardware faults that are currently allowed to affect the
battery subsystem. If the charger does not support hardware faults then
this object will not be supported. … | scalar | HardwareFault | .1.3.6.1.4.1.4413.2.2.2.1.10.2.8 |
| battChargerHardwareFaultsDetected Specifies the hardware faults that are currently active in the battery
subsystem. Writing any valoe to this entry caues ALL faults to be reset.
See bcmAlarmHardwareFault for a d… | scalar | HardwareFault | .1.3.6.1.4.1.4413.2.2.2.1.10.2.9 |