telnetInactivityTimeout
BLADE-MIB ·
.1.3.6.1.4.1.2.3.51.2.4.9.3.4.1
Object
scalar
mandatory
r/w
Integer32
Default is 120 seconds. Value of zero is no timeout. Max value is any positive 4 bytes value. Note that SSH also uses this timeout value to wait before disconnecting inactive SSH connections.
Context
- MIB
- BLADE-MIB
- OID
.1.3.6.1.4.1.2.3.51.2.4.9.3.4.1- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- tcpApplicationConfig
- Siblings
- 22
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sshEnable mandatory Disable/Enable SSH. | scalar | Enumeration | .1.3.6.1.4.1.2.3.51.2.4.9.3.4.10 |
| sshVersion mandatory When SSH is enabled, this object allows the user to
configure whether the SSH server accepts all versions
of client connections or whether it restricts the
connectivity to the mor… | scalar | Enumeration | .1.3.6.1.4.1.2.3.51.2.4.9.3.4.11 |
| sslServerEnable mandatory Disable/Enable SSL Server. | scalar | Enumeration | .1.3.6.1.4.1.2.3.51.2.4.9.3.4.15 |
| sslClientEnable mandatory Disable/Enable SSL Client. If no valid client or server certificate is in place,
SSL client will not be allowed to set to enable. | scalar | Enumeration | .1.3.6.1.4.1.2.3.51.2.4.9.3.4.16 |
| ftpEnable mandatory Disable/Enable FTP. | scalar | Enumeration | .1.3.6.1.4.1.2.3.51.2.4.9.3.4.17 |
| tftpEnable mandatory Disable/Enable TFTP. | scalar | Enumeration | .1.3.6.1.4.1.2.3.51.2.4.9.3.4.19 |
| commandModeInactivityTimeout mandatory The amount of time in seconds before the (Secure)TCP Command Mode times out.
Default value of 0 means no timeout. Max value is any positive 4 byte value. | scalar | Integer32 | .1.3.6.1.4.1.2.3.51.2.4.9.3.4.2 |
| smashTelnetEnable mandatory Disable/Enable SMASH CLP (System Management Architecture for
Server Hardware Command Line Protocol) over Telnet.
This option is not available on all systems. | scalar | Enumeration | .1.3.6.1.4.1.2.3.51.2.4.9.3.4.20 |
| smashSshEnable mandatory Disable/Enable SMASH CLP (System Management Architecture for
Server Hardware Command Line Protocol) over SSH. A valid SSH
server key must be installed before enabling secure SMASH… | scalar | Enumeration | .1.3.6.1.4.1.2.3.51.2.4.9.3.4.21 |
| tftpCreateEmptyFile obsolete This MIB object is no longer a requirement for TFTP and has been deprecated. | scalar | OctetString | .1.3.6.1.4.1.2.3.51.2.4.9.3.4.22 |
| ftpTimeout mandatory The amount of time before FTP times out. Default is 300 seconds.
Value of zero is no timeout. Max value is any positive 4 byte value. | scalar | Integer32 | .1.3.6.1.4.1.2.3.51.2.4.9.3.4.23 |
| rdEnable mandatory Disable/Enable Remote Disk.
NOTE: Change to Remote Disk will take effect after the
next restart of the MM. | scalar | Enumeration | .1.3.6.1.4.1.2.3.51.2.4.9.3.4.24 |
| rdocEnable mandatory Disable/Enable Remote Disk on Card.
NOTE: Change to Remote Disk on Card will take effect
after the next restart of the MM. | scalar | Enumeration | .1.3.6.1.4.1.2.3.51.2.4.9.3.4.25 |
| kvmEnable mandatory Disable/Enable KVM.
NOTE: Change to KVM will take effect after the next
restart of the MM. | scalar | Enumeration | .1.3.6.1.4.1.2.3.51.2.4.9.3.4.26 |
| mmSshServerConfig | node | - | .1.3.6.1.4.1.2.3.51.2.4.9.3.4.27 |
| rpEnable mandatory Disable/Enable Remote Presence. | scalar | Enumeration | .1.3.6.1.4.1.2.3.51.2.4.9.3.4.28 |
| secureCommandModeEnable mandatory Set Secure TCP Command Mode number of connections.
AMM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode.
A value of 0 means disabled.
If … | scalar | Integer32 | .1.3.6.1.4.1.2.3.51.2.4.9.3.4.3 |
| commandModeEnable mandatory Set TCP Command Mode number of connections.
AMM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode.
A value of 0 means disabled.
NOTE: Syst… | scalar | Integer32 | .1.3.6.1.4.1.2.3.51.2.4.9.3.4.4 |
| slpAddrType mandatory Set SLP address type to 0 (multicast) or 1 (broadcast). Note that when
slpAddrType is set to broadcast value then the multicast address set in
slpMulticastAddr will be ignored. | scalar | Enumeration | .1.3.6.1.4.1.2.3.51.2.4.9.3.4.5 |
| slpMulticastAddr mandatory Service Locator Protocol Multicast address | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.2.3.51.2.4.9.3.4.6 |
| slpEnable mandatory Disable/Enable Service Location Protocol.
NOTE: Change to Service Location Protocol will take
effect after the next restart of the MM. | scalar | Enumeration | .1.3.6.1.4.1.2.3.51.2.4.9.3.4.7 |
| telnetEnable mandatory Disable/Enable telnet.
NOTE: Change to telnet enable/disable will take effect immediately. | scalar | Enumeration | .1.3.6.1.4.1.2.3.51.2.4.9.3.4.9 |