smashSshEnable

BLADE-MIB · .1.3.6.1.4.1.2.3.51.2.4.9.3.4.21

Object

scalar mandatory r/w Enumeration

Disable/Enable SMASH CLP (System Management Architecture for
Server Hardware Command Line Protocol) over SSH. A valid SSH
server key must be installed before enabling secure SMASH.
This option is not available on all systems.

Context

MIB: BLADE-MIB
OID: .1.3.6.1.4.1.2.3.51.2.4.9.3.4.21
Type: scalar
Access: readwrite
Status: mandatory
Parent: tcpApplicationConfig
Siblings: 22

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
telnetInactivityTimeout mandatory Default is 120 seconds. Value of zero is no timeout. Max value is any positive 4 bytes value. Note that SSH also uses this timeout value to wait before disconnecting inactive SSH …	scalar	Integer32	`.1.3.6.1.4.1.2.3.51.2.4.9.3.4.1`
sshEnable mandatory Disable/Enable SSH.	scalar	Enumeration	`.1.3.6.1.4.1.2.3.51.2.4.9.3.4.10`
sshVersion mandatory When SSH is enabled, this object allows the user to configure whether the SSH server accepts all versions of client connections or whether it restricts the connectivity to the mor…	scalar	Enumeration	`.1.3.6.1.4.1.2.3.51.2.4.9.3.4.11`
sslServerEnable mandatory Disable/Enable SSL Server.	scalar	Enumeration	`.1.3.6.1.4.1.2.3.51.2.4.9.3.4.15`
sslClientEnable mandatory Disable/Enable SSL Client. If no valid client or server certificate is in place, SSL client will not be allowed to set to enable.	scalar	Enumeration	`.1.3.6.1.4.1.2.3.51.2.4.9.3.4.16`
ftpEnable mandatory Disable/Enable FTP.	scalar	Enumeration	`.1.3.6.1.4.1.2.3.51.2.4.9.3.4.17`
tftpEnable mandatory Disable/Enable TFTP.	scalar	Enumeration	`.1.3.6.1.4.1.2.3.51.2.4.9.3.4.19`
commandModeInactivityTimeout mandatory The amount of time in seconds before the (Secure)TCP Command Mode times out. Default value of 0 means no timeout. Max value is any positive 4 byte value.	scalar	Integer32	`.1.3.6.1.4.1.2.3.51.2.4.9.3.4.2`
smashTelnetEnable mandatory Disable/Enable SMASH CLP (System Management Architecture for Server Hardware Command Line Protocol) over Telnet. This option is not available on all systems.	scalar	Enumeration	`.1.3.6.1.4.1.2.3.51.2.4.9.3.4.20`
tftpCreateEmptyFile obsolete This MIB object is no longer a requirement for TFTP and has been deprecated.	scalar	OctetString	`.1.3.6.1.4.1.2.3.51.2.4.9.3.4.22`
ftpTimeout mandatory The amount of time before FTP times out. Default is 300 seconds. Value of zero is no timeout. Max value is any positive 4 byte value.	scalar	Integer32	`.1.3.6.1.4.1.2.3.51.2.4.9.3.4.23`
rdEnable mandatory Disable/Enable Remote Disk. NOTE: Change to Remote Disk will take effect after the next restart of the MM.	scalar	Enumeration	`.1.3.6.1.4.1.2.3.51.2.4.9.3.4.24`
rdocEnable mandatory Disable/Enable Remote Disk on Card. NOTE: Change to Remote Disk on Card will take effect after the next restart of the MM.	scalar	Enumeration	`.1.3.6.1.4.1.2.3.51.2.4.9.3.4.25`
kvmEnable mandatory Disable/Enable KVM. NOTE: Change to KVM will take effect after the next restart of the MM.	scalar	Enumeration	`.1.3.6.1.4.1.2.3.51.2.4.9.3.4.26`
mmSshServerConfig	node	-	`.1.3.6.1.4.1.2.3.51.2.4.9.3.4.27`
rpEnable mandatory Disable/Enable Remote Presence.	scalar	Enumeration	`.1.3.6.1.4.1.2.3.51.2.4.9.3.4.28`
secureCommandModeEnable mandatory Set Secure TCP Command Mode number of connections. AMM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode. A value of 0 means disabled. If …	scalar	Integer32	`.1.3.6.1.4.1.2.3.51.2.4.9.3.4.3`
commandModeEnable mandatory Set TCP Command Mode number of connections. AMM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode. A value of 0 means disabled. NOTE: Syst…	scalar	Integer32	`.1.3.6.1.4.1.2.3.51.2.4.9.3.4.4`
slpAddrType mandatory Set SLP address type to 0 (multicast) or 1 (broadcast). Note that when slpAddrType is set to broadcast value then the multicast address set in slpMulticastAddr will be ignored.	scalar	Enumeration	`.1.3.6.1.4.1.2.3.51.2.4.9.3.4.5`
slpMulticastAddr mandatory Service Locator Protocol Multicast address	scalar	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.2.3.51.2.4.9.3.4.6`
slpEnable mandatory Disable/Enable Service Location Protocol. NOTE: Change to Service Location Protocol will take effect after the next restart of the MM.	scalar	Enumeration	`.1.3.6.1.4.1.2.3.51.2.4.9.3.4.7`
telnetEnable mandatory Disable/Enable telnet. NOTE: Change to telnet enable/disable will take effect immediately.	scalar	Enumeration	`.1.3.6.1.4.1.2.3.51.2.4.9.3.4.9`

Indexes