x25LocalAddr
BIANCA-BRICK-X25-MIB ·
.1.3.6.1.4.1.272.4.6.11
Object
scalar
mandatory
r/w
The X.25 address to be used as originating address for outgoing X.25 call from this BRICK. A leading @ indicates extended adressing.
Context
- MIB
- BIANCA-BRICK-X25-MIB
- OID
.1.3.6.1.4.1.272.4.6.11- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- x25
- Siblings
- 12
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| x25LinkTable mandatory This table contains an entry for each active link. There
may be mutiple active links per interface. For point-to-
multipoint interfaces, the field x25LkAddr specifies
the (MAC-) a… | table | - | .1.3.6.1.4.1.272.4.6.1 |
| x25LocalPadCall mandatory This object specifies wether a PAD Call (PID=1) routed
to the local X.25 entity (ifIndex=1) should
be accepted to allow for a remote login via X.25. This
may be disabled for secur… | scalar | Enumeration | .1.3.6.1.4.1.272.4.6.10 |
| x25Rerouting mandatory This object specifies whether a rerouting request should be
accepted to establish connection to another server.
This is only relevant for x29 rerouting. | scalar | Enumeration | .1.3.6.1.4.1.272.4.6.12 |
| x25HistoryMaxEntries mandatory Maximum number of x25CallHistory entries in memory. | scalar | Integer32 | .1.3.6.1.4.1.272.4.6.13 |
| x25AccountingTemplate mandatory Specifies the format of accounting messages sent by the
syslog protocol. The format can consist of any order of
the following variables.
Tag Meaning
%S Date and Time the conn… | scalar | OctetString | .1.3.6.1.4.1.272.4.6.14 |
| x25OverIsdnIfTable mandatory This table contains an entry for each Interface
accessible to the X.25 Switch for X.25 over ISDN
B-channel data transfer. This mechanism superseeds
the old one using the PPP imple… | table | - | .1.3.6.1.4.1.272.4.6.15 |
| x25LinkPresetTable mandatory This table predefines the link-parameters to be used,
when a link is created. If no entry is contained
in this table for a particular link, it will be setup
with the default value… | table | - | .1.3.6.1.4.1.272.4.6.2 |
| x25CallTable mandatory This table contains an entry for each active X25-call.
Calls always lead from a source-link to a destination-link.
An interface index of 1 denotates a pseudo interfaces
correspond… | table | - | .1.3.6.1.4.1.272.4.6.3 |
| x25CallHistoryTable mandatory This table provides call information for the last 10 calls
after they have been cleared. Active call are not contained
in the x25CallHistoryTable. | table | - | .1.3.6.1.4.1.272.4.6.4 |
| x25RouteTable mandatory The X.25 Routing Table specifies the target link for
different call parameters. For each incoming call the
route table will be searched for a matching entry. If
multiple entries m… | table | - | .1.3.6.1.4.1.272.4.6.5 |
| x25RewriteTable mandatory This Table contains entries, that describe different
rules of rewriting the call parameters before delivering
a call. Which entry in this table is used, will be determined
by the … | table | - | .1.3.6.1.4.1.272.4.6.6 |
| x25MprTable mandatory This table contains an entry for each partner reachable
via X.25 for Multiprotocol over X.25 according to RFC 1356.
Entries in this table are created manually and will result
to t… | table | - | .1.3.6.1.4.1.272.4.6.7 |