x25AccountingTemplate
BIANCA-BRICK-X25-MIB ·
.1.3.6.1.4.1.272.4.6.14
Object
scalar
mandatory
r/w
OctetString
Specifies the format of accounting messages sent by the
syslog protocol. The format can consist of any order of
the following variables.
Tag Meaning
%S Date and Time the connection was established;
in DD.MM.YY/HH:MM:SS format.
%d The duration of the connection in seconds.
%z The X25 source address.
%Z The X25 destination address.
%y Total number of bytes received over the connection.
%Y Total number of bytes sent over the connection.
%g Total packets received over the connection.
%G Total packets sent over the connection.
%c The X25 clear cause.
%C The X25 clear diagnostic.
%f The source interface.
%F The destination interface.
%v The source virtual channel number.
%V The destination virtual channel number.
The default accounting template setting contains the
following tags: %S,%d,%z,%Z,%y,%Y,%g,%G,%c,%C.
Context
- MIB
- BIANCA-BRICK-X25-MIB
- OID
.1.3.6.1.4.1.272.4.6.14- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- x25
- Siblings
- 12
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| x25LinkTable mandatory This table contains an entry for each active link. There
may be mutiple active links per interface. For point-to-
multipoint interfaces, the field x25LkAddr specifies
the (MAC-) a… | table | - | .1.3.6.1.4.1.272.4.6.1 |
| x25LocalPadCall mandatory This object specifies wether a PAD Call (PID=1) routed
to the local X.25 entity (ifIndex=1) should
be accepted to allow for a remote login via X.25. This
may be disabled for secur… | scalar | Enumeration | .1.3.6.1.4.1.272.4.6.10 |
| x25LocalAddr mandatory The X.25 address to be used as originating address
for outgoing X.25 call from this BRICK. A leading
@ indicates extended adressing. | scalar | - | .1.3.6.1.4.1.272.4.6.11 |
| x25Rerouting mandatory This object specifies whether a rerouting request should be
accepted to establish connection to another server.
This is only relevant for x29 rerouting. | scalar | Enumeration | .1.3.6.1.4.1.272.4.6.12 |
| x25HistoryMaxEntries mandatory Maximum number of x25CallHistory entries in memory. | scalar | Integer32 | .1.3.6.1.4.1.272.4.6.13 |
| x25OverIsdnIfTable mandatory This table contains an entry for each Interface
accessible to the X.25 Switch for X.25 over ISDN
B-channel data transfer. This mechanism superseeds
the old one using the PPP imple… | table | - | .1.3.6.1.4.1.272.4.6.15 |
| x25LinkPresetTable mandatory This table predefines the link-parameters to be used,
when a link is created. If no entry is contained
in this table for a particular link, it will be setup
with the default value… | table | - | .1.3.6.1.4.1.272.4.6.2 |
| x25CallTable mandatory This table contains an entry for each active X25-call.
Calls always lead from a source-link to a destination-link.
An interface index of 1 denotates a pseudo interfaces
correspond… | table | - | .1.3.6.1.4.1.272.4.6.3 |
| x25CallHistoryTable mandatory This table provides call information for the last 10 calls
after they have been cleared. Active call are not contained
in the x25CallHistoryTable. | table | - | .1.3.6.1.4.1.272.4.6.4 |
| x25RouteTable mandatory The X.25 Routing Table specifies the target link for
different call parameters. For each incoming call the
route table will be searched for a matching entry. If
multiple entries m… | table | - | .1.3.6.1.4.1.272.4.6.5 |
| x25RewriteTable mandatory This Table contains entries, that describe different
rules of rewriting the call parameters before delivering
a call. Which entry in this table is used, will be determined
by the … | table | - | .1.3.6.1.4.1.272.4.6.6 |
| x25MprTable mandatory This table contains an entry for each partner reachable
via X.25 for Multiprotocol over X.25 according to RFC 1356.
Entries in this table are created manually and will result
to t… | table | - | .1.3.6.1.4.1.272.4.6.7 |