x21IfSpeed
BIANCA-BRICK-X21-MIB ·
.1.3.6.1.4.1.272.4.10.1.1.5
Object
column
mandatory
r/w
Enumeration
The X21 interface speed in bits per second. The range can be configured between 2Mbits and 2400 Bits per second.
Context
- MIB
- BIANCA-BRICK-X21-MIB
- OID
.1.3.6.1.4.1.272.4.10.1.1.5- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- x21IfEntry
- Table
- x21IfTable
- Siblings
- 21
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | s2048k |
2 | s1024k |
3 | s512k |
4 | s256k |
5 | s128k |
6 | s64000 |
7 | s38400 |
8 | s19200 |
9 | s14400 |
10 | s9600 |
11 | s2400 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| x21IfIndex mandatory Unique index of the X21 interface. | column | Integer32 | .1.3.6.1.4.1.272.4.10.1.1.1 |
| x21IfTxPackets mandatory Count of transmitted valid Frames. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.10.1.1.10 |
| x21IfTxOctets mandatory Count of transmitted bytes. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.10.1.1.11 |
| x21IfRxResets mandatory Count of receiver resets. Under rare circumstances it
might be necessary to reset the receiver to work
properly. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.10.1.1.12 |
| x21IfRxAborts mandatory Count of receiver aborts. The sender of a frame can
indicate a frame as aborted with a special Abort
sequence. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.10.1.1.13 |
| x21IfRxOverruns mandatory Count of receiver overruns. If the X21 card is unable
to grant sufficiently soon/often the bus, the
32-character RxFIFO may fill up. This leads to loss of
data. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.10.1.1.14 |
| x21IfRxCRCErrors mandatory Count of corrupted frames. Errors due to interference
on the X21 cable. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.10.1.1.15 |
| x21IfRxGiantFrames mandatory Count of received frames with illegal framesize. This
can occur if a frame delimiter is destroyed. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.10.1.1.16 |
| x21IfTxResets mandatory Count of transmitter resets. Under rare circumstances
it might be necessary to reset the transmitter to work
properly. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.10.1.1.17 |
| x21IfTxAborts mandatory Count of transmitter aborts. While sending a frame it
might be necessary to indicate this frame as aborted. In
this case the receiver regards this frame as illegal. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.10.1.1.18 |
| x21IfTxUnderruns mandatory Count of transmitter underruns. The serial data for the
X21 card is supplied too slowly. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.10.1.1.19 |
| x21IfL1State mandatory The X21 physical layer state
dn(1) physical layer is inactive;
up(2) physical layer is active; | column | Enumeration | .1.3.6.1.4.1.272.4.10.1.1.2 |
| x21IfTxGiantFrames mandatory Count of transmitted frames with illegal
framesize. This can occur if an upper module creates
packets with more than the maximum allowed packet size. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.10.1.1.20 |
| x21IfIfReSyncs mandatory Count of interface resynchronization. Under rare
circumstances it might be necessary to resynchronize
the physical interface to work properly. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.10.1.1.21 |
| x21IfBundle mandatory Index of the bundle to aggregate multiple Channels
to one interface. | column | Integer32 | .1.3.6.1.4.1.272.4.10.1.1.22 |
| x21IfL1Mode mandatory The physical layer (layer 1) mode. When configured as
DCE(2) the X21 interface provides the clock. | column | Enumeration | .1.3.6.1.4.1.272.4.10.1.1.3 |
| x21IfIfLeads mandatory The value of IfLeads has influence on the state of the
physical layer (L1State). When configured as
IfLeads=enabled(1), the state of the physical layer
depends on the signals of t… | column | Enumeration | .1.3.6.1.4.1.272.4.10.1.1.4 |
| x21IfL2Mode mandatory The layer 2 mode. This value has influence on the
HDLC address field (first byte of a HDCL frame). When
configured as DTE(1) the address in a command frame is
0x01, when configure… | column | Enumeration | .1.3.6.1.4.1.272.4.10.1.1.6 |
| x21IfSpeedReal mandatory The measured X21 interface speed in bits per second. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.10.1.1.7 |
| x21IfRxPackets mandatory Count of received valid Frames. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.10.1.1.8 |
| x21IfRxOctets mandatory Count of received bytes. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.10.1.1.9 |