upsAlarmCheckFan
BESTPOWER-MIB ·
.1.3.6.1.4.1.2947.1.8.4.17
Object
scalar
mandatory
Integer32
The fan on the UPS has stopped
Context
- MIB
- BESTPOWER-MIB
- OID
.1.3.6.1.4.1.2947.1.8.4.17- Type
- scalar
- Access
- readonly
- Status
- mandatory
- Parent
- upsWellKnownAlarms
- Siblings
- 35
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| upsAlarmOnBattery mandatory The UPS is drawing power from the batteries. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.1 |
| upsAlarmOutputOverload mandatory The output load exceeds the UPS output capacity. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.10 |
| upsAlarmLowAcOut mandatory The output load has exceeded the UPS output capacity, and the UPS has shut down. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.11 |
| upsAlarmCircuitBreakerWarning mandatory To much load equipment has been connected to the UPS and has has caused excess
current draw from the output. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.12 |
| upsAlarmCircuitBreakerShdn mandatory The UPS has shut down due to an extended excess of current draw
from the output. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.13 |
| upsAlarmBypassOn mandatory The Bypass is presently engaged on the UPS. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.14 |
| upsAlarmAutoBypass mandatory The UPS has gone into the Auto Bypass mode to redirect power around
the UPS circuitry. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.15 |
| upsAlarmSiteWiringFault mandatory The UPS has found a problem in your wall outlet. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.16 |
| upsAlarmHighAmbTemp mandatory The internal temperature inside the UPS is too hot. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.18 |
| upsAlarmHighHSTemp mandatory The Inverter heatsink assembly inside the UPS is to hot . | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.19 |
| upsAlarmLowRuntime mandatory The remaining battery runtime is less than or equal
to the upsConfigLowRuntimeSetpoint. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.2 |
| upsAlarmHighXFMRTemp mandatory The temperature of the main transformer inside the UPS is too hot . | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.20 |
| upsAlarmHighPFMTemp mandatory The temperature of the PFM module inside the UPS is too hot . | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.21 |
| upsAlarmProbeMissing mandatory One or all of the sense probes has been disconnected on the UPS. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.22 |
| upsAlarmCheckPowerSupply mandatory The internal DC supply voltages are attenuated or missing. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.23 |
| upsAlarmTapRegulator mandatory The UPS detected a possible failure in the tap changer (open or
welded relay, etc.) | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.24 |
| upsAlarmRelayFailure mandatory There is a hardware problem inside the UPS. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.25 |
| upsAlarmCheckFuse mandatory The failure of one or more fuses has been detected. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.26 |
| upsAlarmCheckMOV mandatory One or more MOVs have failed due to a voltage surge. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.27 |
| upsAlarmMemoryError mandatory The UPS has lost the programmed settings in the memory of the logic
board. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.28 |
| upsAlarmCallService mandatory A hardware malfunction has occurred inside the UPS. Please consult a
factory authorized service representative for assistance. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.29 |
| upsAlarmNearLowBattery mandatory The battery voltage on the UPS has reached a value where the inverter will
not be able to function very much longer. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.3 |
| upsAlarmupsFailed mandatory A general fault in the UPS has been detected. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.30 |
| upsAlarmUserTest mandatory A user test of the alarm beeper is in progress. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.31 |
| upsAlarmTestInProgress mandatory A test is in progress. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.32 |
| upsAlarmDiagnosticTestFailed mandatory The result of the last diagnostic test indicates a failure. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.33 |
| upsAlarmEPO mandatory The Emergency Power OFF feature has been activiated at the RS-232
port on the UPS. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.34 |
| upsAlarmUpsOff mandatory The output of the UPS is in the off state. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.35 |
| upsAlarmCommunicationsLost mandatory A problem has been encountered in the
communications between the agent and the UPS. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.36 |
| upsAlarmLowBattery mandatory The battery voltage on the UPS has reached a value where the inverter
has stopped providing output power to the connected load equipment.
The UPS has shutdown to protect the batte… | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.4 |
| upsAlarmHighBattery mandatory The battery charger voltage on the UPS has reached a value that
is too high for safe battery maintenance. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.5 |
| upsAlarmCheckBattery mandatory The periodic battery test has failed. A manual test of the batteries
needs to be performed to determine which battery\batteries need
replaced. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.6 |
| upsAlarmReplaceBattery mandatory One or more batteries have been determined to require
replacement. Compatibility: Fortress II | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.7 |
| upsAlarmCheckInverter mandatory The inverter has failed the automatic system test. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.8 |
| upsAlarmBatteriesDisconnected mandatory The UPS has detected that the DC voltage needed to start up is too
low or missing. | scalar | Integer32 | .1.3.6.1.4.1.2947.1.8.4.9 |