bsAdacNotificationControlEnable
BAY-STACK-ADAC-MIB ·
.1.3.6.1.4.1.45.5.9.1.1.7
Object
This object controls whether port status changes will result in generation of a bsAdacPortConfigNotification. The value true(1) means that the notifications will be generated. The value false(2) means that they will not be generated.
Context
- MIB
- BAY-STACK-ADAC-MIB
- OID
.1.3.6.1.4.1.45.5.9.1.1.7- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- bsAdacScalars
- Siblings
- 10
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bsAdacCallServerPortList The ports on which the Call Server is connected. This value
is used only when the current operating mode is either
untaggedFramesAdvanced(2) or taggedFrames(3). It may not
be ch… | scalar | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.45.5.9.1.1.10 |
| bsAdacUplinkPortList The uplink ports are used usually when the Call Server is not
connected directly to the current module/stack. This value
is used only when the current operating mode is either
un… | scalar | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.45.5.9.1.1.11 |
| bsAdacUplinkType The ADAC uplink type.
A value of port(1) means that the ADAC uplink is the clasical
port type uplink. bsAdacUplinkPortList will be used to specify
the actual uplink por… | scalar | Enumeration | .1.3.6.1.4.1.45.5.9.1.1.12 |
| bsAdacAdminEnable This object is used to administratively enable or disable ADAC.
A value of true(1) means ADAC should be enabled, while a value
of false(2) means ADAC should be disabled. Note tha… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.9.1.1.2 |
| bsAdacOperatingMode This operating mode must be set depending on how the
IP Phones are configured to send frames (tagged/untagged)
and on the desired level of complexity for auto-configuration.
… | scalar | Enumeration | .1.3.6.1.4.1.45.5.9.1.1.3 |
| bsAdacCallServerPort The port on which the Call Server is connected. This value
is used only when the current operating mode is either
untaggedFramesAdvanced(2) or taggedFrames(3). It may not
be cha… | scalar | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.45.5.9.1.1.4 |
| bsAdacUplinkPort The uplink port is used usually when the Call Server is not
connected directly to the current module/stack. This value
is used only when the current operating mode is either
unta… | scalar | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.45.5.9.1.1.5 |
| bsAdacVoiceVlan A value that uniquely identifies the Voice Virtual LAN associated
with ADAC. This value it is used only when the current operating
mode is untaggedFramesAdvanced(2) or taggedFram… | scalar | Q-BRIDGE-MIBVlanIdOrNone | .1.3.6.1.4.1.45.5.9.1.1.6 |
| bsAdacMacAddrRangeControl This object always returns none(1) when retrieved. When set to
clearTable(2), it will delete all entries from the
bsAdacMacAddrRangeTable. When set to defaultTable(3), it will
d… | scalar | Enumeration | .1.3.6.1.4.1.45.5.9.1.1.8 |
| bsAdacOperEnable This object indicates whether ADAC is operationally enabled. A
value of true(1) indicates that it is enabled, while a value of
false(2) indicates that it is disabled. Note a val… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.9.1.1.9 |