bsAdacAdminEnable
BAY-STACK-ADAC-MIB ·
.1.3.6.1.4.1.45.5.9.1.1.2
Object
This object is used to administratively enable or disable ADAC. A value of true(1) means ADAC should be enabled, while a value of false(2) means ADAC should be disabled. Note that ADAC might remain operationally disabled due to other conditions (such as missing Uplink and Call Server ports). To determine whether ADAC is operationally enabled, see bsAdacOperEnable.
Context
- MIB
- BAY-STACK-ADAC-MIB
- OID
.1.3.6.1.4.1.45.5.9.1.1.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- bsAdacScalars
- Siblings
- 10
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bsAdacCallServerPortList The ports on which the Call Server is connected. This value
is used only when the current operating mode is either
untaggedFramesAdvanced(2) or taggedFrames(3). It may not
be ch… | scalar | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.45.5.9.1.1.10 |
| bsAdacUplinkPortList The uplink ports are used usually when the Call Server is not
connected directly to the current module/stack. This value
is used only when the current operating mode is either
un… | scalar | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.45.5.9.1.1.11 |
| bsAdacUplinkType The ADAC uplink type.
A value of port(1) means that the ADAC uplink is the clasical
port type uplink. bsAdacUplinkPortList will be used to specify
the actual uplink por… | scalar | Enumeration | .1.3.6.1.4.1.45.5.9.1.1.12 |
| bsAdacOperatingMode This operating mode must be set depending on how the
IP Phones are configured to send frames (tagged/untagged)
and on the desired level of complexity for auto-configuration.
… | scalar | Enumeration | .1.3.6.1.4.1.45.5.9.1.1.3 |
| bsAdacCallServerPort The port on which the Call Server is connected. This value
is used only when the current operating mode is either
untaggedFramesAdvanced(2) or taggedFrames(3). It may not
be cha… | scalar | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.45.5.9.1.1.4 |
| bsAdacUplinkPort The uplink port is used usually when the Call Server is not
connected directly to the current module/stack. This value
is used only when the current operating mode is either
unta… | scalar | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.45.5.9.1.1.5 |
| bsAdacVoiceVlan A value that uniquely identifies the Voice Virtual LAN associated
with ADAC. This value it is used only when the current operating
mode is untaggedFramesAdvanced(2) or taggedFram… | scalar | Q-BRIDGE-MIBVlanIdOrNone | .1.3.6.1.4.1.45.5.9.1.1.6 |
| bsAdacNotificationControlEnable This object controls whether port status changes will result in
generation of a bsAdacPortConfigNotification. The value true(1)
means that the notifications will be generated. T… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.9.1.1.7 |
| bsAdacMacAddrRangeControl This object always returns none(1) when retrieved. When set to
clearTable(2), it will delete all entries from the
bsAdacMacAddrRangeTable. When set to defaultTable(3), it will
d… | scalar | Enumeration | .1.3.6.1.4.1.45.5.9.1.1.8 |
| bsAdacOperEnable This object indicates whether ADAC is operationally enabled. A
value of true(1) indicates that it is enabled, while a value of
false(2) indicates that it is disabled. Note a val… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.9.1.1.9 |