automationGeoLatitude

AUTOMATION-SYSTEM-MIB · .1.3.6.1.4.1.4329.6.3.2.1.1.10
MIB view Table view

Object

scalar r/w SNMPv2-TCDisplayString 
geographical latitude of the equipment site
shown in one of the following formats:
- DD.DDDDDD^
- DD^MM.MMMM'
- DD^MM'SS.SS.
a leading '+' sign or the trailing letter 'N'
indicates northern latitude,
a leading '-' sign or the trailing letter 'S'
indicates southern latitude.
The geodesic reference system is WGS84.
Only so many shall be written for fractional
digits until the desired precision is
represented.
Examples:  49.025^, 49^01.5224',
           49^01'31.343 N,
          +49^01'31.343
        or 49^01'31.343

Context

MIB
AUTOMATION-SYSTEM-MIB
OID
.1.3.6.1.4.1.4329.6.3.2.1.1.10
Type
scalar
Access
readwrite
Status
current
Parent
automationSystemIdent
Siblings
15

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
automationManufacturerId
A code which identifies the vendor of the component (e. g. the specific department or OEM).
scalarUnsigned32.1.3.6.1.4.1.4329.6.3.2.1.1.1
automationGeoLongitude
geographical longitude of the equipment site shown in one of the following formats: - DDD.DDDDD^ - DDD^MM.MMMM' - DDD^MM'SS.SS a leading '+' sign or the trailing letter 'O' or 'E'…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.4329.6.3.2.1.1.11
automationGeoHeight
geographical height of the equipment site in the following format: - dddddd m (high-order zeros are suppressed) a leading sign '-' indicates a height below zer…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.4329.6.3.2.1.1.12
automationTimeZoneOffsetHours
The offset hours of the time zone group's time zone from UTC.
scalarInteger32.1.3.6.1.4.1.4329.6.3.2.1.1.13
automationTimeZoneOffsetMinutes
The offset minutes of the time zone group's time zone from UTC.
scalarInteger32.1.3.6.1.4.1.4329.6.3.2.1.1.14
automationSwUser
The name of the user who made the last firmware update. The value 'unknown' shall be given, if the user is not known.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.4329.6.3.2.1.1.15
automationSwDate
The time of the last firmware update. The value starts with the date of the default configuration. If a system doesn't support an absolute time it must not support the value.
scalarSNMPv2-TCDateAndTime.1.3.6.1.4.1.4329.6.3.2.1.1.16
automationOrderNumber
The type / order number of the system.
scalarAUTOMATION-TCAutomationOrderNumberTC.1.3.6.1.4.1.4329.6.3.2.1.1.2
automationSerialNumber
The serial number of the system.
scalarAUTOMATION-TCAutomationSerialNumberTC.1.3.6.1.4.1.4329.6.3.2.1.1.3
automationHwRevision
The hardware version of the system.
scalarAUTOMATION-TCAutomationVersionNumberTC.1.3.6.1.4.1.4329.6.3.2.1.1.4
automationSwRevision
The firmware version of the system.
scalarAUTOMATION-TCAutomationVersionNumberTC.1.3.6.1.4.1.4329.6.3.2.1.1.5
automationRevisionCounter
This value will be incremented every time one of the other values of automationIM0Group or automationIM1Group (cp. conformance statements) changes. The counter starts with 1 (def…
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.4329.6.3.2.1.1.6
automationRevisionDate
The time of the last change of the value of automationRevisionCounter. The value starts with the date of the default configuration. If a system doesn't support an absolute time it…
scalarSNMPv2-TCDateAndTime.1.3.6.1.4.1.4329.6.3.2.1.1.7
automationFunctionTag
A code which describes the function of the component within the plant. This value will be set by the engineering system. It is comparable to the 'sysName'of MIB-II but from the au…
scalarAUTOMATION-TCAutomationFunctionStringTC.1.3.6.1.4.1.4329.6.3.2.1.1.8
automationLocationTag
A code which describes the location where the component is installed within the plant. This value will be set by the engineering system. It is comparable to the 'sysLocation' of M…
scalarAUTOMATION-TCAutomationLocationStringTC.1.3.6.1.4.1.4329.6.3.2.1.1.9