automationFunctionTag
AUTOMATION-SYSTEM-MIB ·
.1.3.6.1.4.1.4329.6.3.2.1.1.8
Object
scalar
AUTOMATION-TCAutomationFunctionStringTC
A code which describes the function of the component within the plant. This value will be set by the engineering system. It is comparable to the 'sysName'of MIB-II but from the automation point of view.
Context
- MIB
- AUTOMATION-SYSTEM-MIB
- OID
.1.3.6.1.4.1.4329.6.3.2.1.1.8- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- automationSystemIdent
- Siblings
- 15
Syntax
AUTOMATION-TCAutomationFunctionStringTC
- Source
- AUTOMATION-TCAutomationFunctionStringTC
- Base type
OctetString
Values & Constraints
Type Constraints
range: 32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| automationManufacturerId A code which identifies the vendor of the
component (e. g. the specific department
or OEM). | scalar | Unsigned32 | .1.3.6.1.4.1.4329.6.3.2.1.1.1 |
| automationGeoLatitude geographical latitude of the equipment site
shown in one of the following formats:
- DD.DDDDDD^
- DD^MM.MMMM'
- DD^MM'SS.SS.
a leading '+' sign or the trailing letter 'N'
indicate… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4329.6.3.2.1.1.10 |
| automationGeoLongitude geographical longitude of the equipment site
shown in one of the following formats:
- DDD.DDDDD^
- DDD^MM.MMMM'
- DDD^MM'SS.SS
a leading '+' sign or the trailing letter
'O' or 'E'… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4329.6.3.2.1.1.11 |
| automationGeoHeight geographical height of the equipment site
in the following format:
- dddddd m (high-order zeros are suppressed)
a leading sign '-' indicates a height
below zer… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4329.6.3.2.1.1.12 |
| automationTimeZoneOffsetHours The offset hours of the time zone group's
time zone from UTC. | scalar | Integer32 | .1.3.6.1.4.1.4329.6.3.2.1.1.13 |
| automationTimeZoneOffsetMinutes The offset minutes of the time zone group's
time zone from UTC. | scalar | Integer32 | .1.3.6.1.4.1.4329.6.3.2.1.1.14 |
| automationSwUser The name of the user who made the last
firmware update.
The value 'unknown' shall be
given, if the user is not known. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4329.6.3.2.1.1.15 |
| automationSwDate The time of the last firmware update.
The value starts with the date of the
default configuration.
If a system doesn't support an absolute time
it must not support the value. | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.4329.6.3.2.1.1.16 |
| automationOrderNumber The type / order number of the system. | scalar | AUTOMATION-TCAutomationOrderNumberTC | .1.3.6.1.4.1.4329.6.3.2.1.1.2 |
| automationSerialNumber The serial number of the system. | scalar | AUTOMATION-TCAutomationSerialNumberTC | .1.3.6.1.4.1.4329.6.3.2.1.1.3 |
| automationHwRevision The hardware version of the system. | scalar | AUTOMATION-TCAutomationVersionNumberTC | .1.3.6.1.4.1.4329.6.3.2.1.1.4 |
| automationSwRevision The firmware version of the system. | scalar | AUTOMATION-TCAutomationVersionNumberTC | .1.3.6.1.4.1.4329.6.3.2.1.1.5 |
| automationRevisionCounter This value will be incremented every time
one of the other values of
automationIM0Group or automationIM1Group
(cp. conformance statements) changes.
The counter starts with 1
(def… | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4329.6.3.2.1.1.6 |
| automationRevisionDate The time of the last change of the value of
automationRevisionCounter. The value starts
with the date of the default configuration.
If a system doesn't support an absolute time
it… | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.4329.6.3.2.1.1.7 |
| automationLocationTag A code which describes the location where
the component is installed within the plant.
This value will be set by the engineering
system. It is comparable to the
'sysLocation' of M… | scalar | AUTOMATION-TCAutomationLocationStringTC | .1.3.6.1.4.1.4329.6.3.2.1.1.9 |