atmSigEmitMsgErrors

ATM2-MIB · .1.3.6.1.2.1.37.1.14.1.3.1.12

Object

column SNMPv2-SMICounter32

Number of Incorrect Messages transmitted on this interface.
The Incorrect Messages Counter reflects any sort of incorrect
information in a message.  This includes:
              
- RELEASE, RELEASE COMPLETE, ADD PARTY REJECT,
  and STATUS messages transmitted or
  received, that contain any of the Cause values
  listed below.
              
- Ignored messages.  These messages are dropped
  because the message was so damaged that it could
  not be further processed.  A list of dropped
  messages is compiled below:
              
   1.  Message with invalid protocol discriminator
              
   2.  Message with errors in the call reference I.E.
        - Bits 5-8 of the first octet not equal to
          '0000'
        - Bits 1-4 of the first octet indicating a
          length other than 3 octets
        - RELEASE COMPLETE message received with a
          call reference that does not relate to a
          call active or in progress
        - SETUP message received with call reference
          flag incorrectly set to 1
        - SETUP message received with a call
          reference for a call that is already
          active or in progress.
              
   3.  Message too short
              
The following cause values are monitored by this counter
(Note: These cause values apply to both UNI3.0 and UNI3.1
unless otherwise stated):
              
Cause Value     Meaning
              
   10     VPCI/VCI unacceptable (UNI3.0 only)
   36     VPCI/VCI assignment failure (UNI3.1 only)
   81     invalid call reference value
   82     identified channel does not exist
   89     invalid endpoint reference
   96     mandatory information element is missing
   97     message type non-existent or not
          implemented
   99     information element non-existent or not
          implemented
   100    invalid information element contents
   101    message not compatible with call state
   104    incorrect message length
   111    protocol error, unspecified
              
   NOTE:  For this counter, RELEASE COMPLETE messages that are
   a reply to a previous RELEASE message and contain the same
   cause value, are redundant (for counting purposes) and
   should not be counted.

Context

MIB: ATM2-MIB
OID: .1.3.6.1.2.1.37.1.14.1.3.1.12
Type: column
Access: readonly
Status: current
Parent: atmSigStatEntry
Table: atmSigStatTable
Siblings: 19

Syntax

SNMPv2-SMICounter32

Source: SNMPv2-SMICounter32
Base type: Unsigned32

Values & Constraints

Type Constraints

range: 0..4294967295

Related Objects

Sibling Objects

Object	Type	Syntax	OID
atmSigSSCOPConEvents SSCOP Connection Events Counter. This counter counts the sum of the following errors: 1) SSCOP Connection Disconnect Counter The abnormal occurr…	column	SNMPv2-SMICounter32	`.1.3.6.1.2.1.37.1.14.1.3.1.1`
atmSigEmitCldPtyEvents Number of Called Party Responsible For Unsuccessful Call transmitted from this interface. This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by …	column	SNMPv2-SMICounter32	`.1.3.6.1.2.1.37.1.14.1.3.1.10`
atmSigDetectMsgErrors Number of Incorrect Messages detected on this interface. The Incorrect Messages Counter reflects any sort of incorrect information in a message. This includes: - …	column	SNMPv2-SMICounter32	`.1.3.6.1.2.1.37.1.14.1.3.1.11`
atmSigDetectClgPtyEvents Number of Calling Party Events detected on this interface. This counter monitors error events that occur due to the originating user doing something wrong. This counter is increm…	column	SNMPv2-SMICounter32	`.1.3.6.1.2.1.37.1.14.1.3.1.13`
atmSigEmitClgPtyEvents Number of Calling Party Events transmitted from this interface. This counter monitors error events that occur due to the originating user doing something wrong. This counter is i…	column	SNMPv2-SMICounter32	`.1.3.6.1.2.1.37.1.14.1.3.1.14`
atmSigDetectTimerExpireds Number of Timer Expiries detected on this interface. The Timer Expiries Counter provides a count of network timer expiries, and to some extent, host or switch timer expiries. Th…	column	SNMPv2-SMICounter32	`.1.3.6.1.2.1.37.1.14.1.3.1.15`
atmSigEmitTimerExpireds Number of Timer Expiries transmitted from this interface. The Timer Expiries Counter provides a count of network timer expiries, and to some extent, host or switch timer expiries.…	column	SNMPv2-SMICounter32	`.1.3.6.1.2.1.37.1.14.1.3.1.16`
atmSigDetectRestarts Number of Restart Activity errors detected on this interface. The Restart Activity Counter provides a count of host, switch, or network restart activity. This counter is incremen…	column	SNMPv2-SMICounter32	`.1.3.6.1.2.1.37.1.14.1.3.1.17`
atmSigEmitRestarts Number of Restart Activity errors transmitted from this interface. The Restart Activity Counter provides a count of host, switch, or network restart activity. This counter is in…	column	SNMPv2-SMICounter32	`.1.3.6.1.2.1.37.1.14.1.3.1.18`
atmSigInEstabls Number of SVCs established at this signalling entity for incoming connections.	column	SNMPv2-SMICounter32	`.1.3.6.1.2.1.37.1.14.1.3.1.19`
atmSigSSCOPErrdPdus SSCOP Errored PDUs Counter. This counter counts the sum of the following errors: 1) Invalid PDUs. These are defined in SSCOP and consist of PDUs with an inco…	column	SNMPv2-SMICounter32	`.1.3.6.1.2.1.37.1.14.1.3.1.2`
atmSigOutEstabls Number of SVCs established at this signalling entity for outgoing connections.	column	SNMPv2-SMICounter32	`.1.3.6.1.2.1.37.1.14.1.3.1.20`
atmSigDetectSetupAttempts Call Setup Attempts Counter. This counter counts the number of call setup attempts (both successful and unsuccessful) detected on this interface.	column	SNMPv2-SMICounter32	`.1.3.6.1.2.1.37.1.14.1.3.1.3`
atmSigEmitSetupAttempts Call Setup Attempts Counter. This counter counts the number of call setup attempts (both successful and unsuccessful) transmitted on this interface.	column	SNMPv2-SMICounter32	`.1.3.6.1.2.1.37.1.14.1.3.1.4`
atmSigDetectUnavailRoutes Number of Route Unavailability detected on this interface. This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE message for the same c…	column	SNMPv2-SMICounter32	`.1.3.6.1.2.1.37.1.14.1.3.1.5`
atmSigEmitUnavailRoutes Number of Route Unavailability transmitted from this interface. This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE message for the …	column	SNMPv2-SMICounter32	`.1.3.6.1.2.1.37.1.14.1.3.1.6`
atmSigDetectUnavailResrcs Number of Resource Unavailability detected on this interface. This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE message for the sa…	column	SNMPv2-SMICounter32	`.1.3.6.1.2.1.37.1.14.1.3.1.7`
atmSigEmitUnavailResrcs Number of Resource Unavailability transmitted from this interface. This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE message for t…	column	SNMPv2-SMICounter32	`.1.3.6.1.2.1.37.1.14.1.3.1.8`
atmSigDetectCldPtyEvents Number of Called Party Responsible For Unsuccessful Call detected on this interface. This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a REL…	column	SNMPv2-SMICounter32	`.1.3.6.1.2.1.37.1.14.1.3.1.9`