atmSigDetectMsgErrors
ATM2-MIB ·
.1.3.6.1.2.1.37.1.14.1.3.1.11
Object
column
SNMPv2-SMICounter32
Number of Incorrect Messages detected on this interface. The
Incorrect Messages Counter reflects any sort of incorrect
information in a message. This includes:
- RELEASE, RELEASE COMPLETE, ADD PARTY REJECT,
and STATUS messages transmitted, that contain any of
the Cause values listed below.
- Ignored messages. These messages are dropped
because the message was so damaged that it could
not be further processed. A list of dropped
messages is compiled below:
1. Message with invalid protocol discriminator
2. Message with errors in the call reference I.E.
- Bits 5-8 of the first octet not equal to
'0000'
- Bits 1-4 of the first octet indicating a
length other than 3 octets
- RELEASE COMPLETE message received with a
call reference that does not relate to a
call active or in progress
- SETUP message received with call reference
flag incorrectly set to 1
- SETUP message received with a call
reference for a call that is already
active or in progress.
3. Message too short
The following cause values are monitored by this counter (Note:
These cause values apply to both UNI3.0 and UNI3.1 unless
otherwise stated):
Cause Value Meaning
10 VPCI/VCI unacceptable (UNI3.0 only)
36 VPCI/VCI assignment failure (UNI3.1 only)
81 invalid call reference value
82 identified channel does not exist
89 invalid endpoint reference
96 mandatory information element is missing
97 message type non-existent or not
implemented
99 information element non-existent or not
implemented
100 invalid information element contents
101 message not compatible with call state
104 incorrect message length
111 protocol error, unspecified
NOTE: For this counter, RELEASE COMPLETE messages that are
a reply to a previous RELEASE message and contain the same
cause value, are redundant (for counting purposes) and
should not be counted.
Context
- MIB
- ATM2-MIB
- OID
.1.3.6.1.2.1.37.1.14.1.3.1.11- Type
- column
- Access
- readonly
- Status
- current
- Parent
- atmSigStatEntry
- Table
- atmSigStatTable
- Siblings
- 19
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmSigSSCOPConEvents SSCOP Connection Events Counter. This counter counts
the sum of the following errors:
1) SSCOP Connection Disconnect Counter
The abnormal occurr… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.37.1.14.1.3.1.1 |
| atmSigEmitCldPtyEvents Number of Called Party Responsible For Unsuccessful Call
transmitted from this interface. This counter is incremented
when a RELEASE, RELEASE COMPLETE (only when not preceded by … | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.37.1.14.1.3.1.10 |
| atmSigEmitMsgErrors Number of Incorrect Messages transmitted on this interface.
The Incorrect Messages Counter reflects any sort of incorrect
information in a message. This includes:
… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.37.1.14.1.3.1.12 |
| atmSigDetectClgPtyEvents Number of Calling Party Events detected on this interface.
This counter monitors error events that occur due to the
originating user doing something wrong. This counter is
increm… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.37.1.14.1.3.1.13 |
| atmSigEmitClgPtyEvents Number of Calling Party Events transmitted from this interface.
This counter monitors error events that occur due to the
originating user doing something wrong. This counter is
i… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.37.1.14.1.3.1.14 |
| atmSigDetectTimerExpireds Number of Timer Expiries detected on this interface. The Timer
Expiries Counter provides a count of network timer expiries, and
to some extent, host or switch timer expiries. Th… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.37.1.14.1.3.1.15 |
| atmSigEmitTimerExpireds Number of Timer Expiries transmitted from this interface.
The Timer Expiries Counter provides a count of network timer
expiries, and to some extent, host or switch timer expiries.… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.37.1.14.1.3.1.16 |
| atmSigDetectRestarts Number of Restart Activity errors detected on this interface.
The Restart Activity Counter provides a count of host, switch,
or network restart activity. This counter is incremen… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.37.1.14.1.3.1.17 |
| atmSigEmitRestarts Number of Restart Activity errors transmitted from this
interface. The Restart Activity Counter provides a count of
host, switch, or network restart activity. This counter is
in… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.37.1.14.1.3.1.18 |
| atmSigInEstabls Number of SVCs established at this signalling entity for
incoming connections. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.37.1.14.1.3.1.19 |
| atmSigSSCOPErrdPdus SSCOP Errored PDUs Counter. This counter counts the
sum of the following errors:
1) Invalid PDUs.
These are defined in SSCOP and consist of PDUs
with an inco… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.37.1.14.1.3.1.2 |
| atmSigOutEstabls Number of SVCs established at this signalling entity for
outgoing connections. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.37.1.14.1.3.1.20 |
| atmSigDetectSetupAttempts Call Setup Attempts Counter. This counter counts
the number of call setup attempts (both successful
and unsuccessful) detected on this interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.37.1.14.1.3.1.3 |
| atmSigEmitSetupAttempts Call Setup Attempts Counter. This counter counts
the number of call setup attempts (both successful
and unsuccessful) transmitted on this interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.37.1.14.1.3.1.4 |
| atmSigDetectUnavailRoutes Number of Route Unavailability detected on this interface.
This counter is incremented when a RELEASE, RELEASE COMPLETE
(only when not preceded by a RELEASE message for the same
c… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.37.1.14.1.3.1.5 |
| atmSigEmitUnavailRoutes Number of Route Unavailability transmitted from this
interface. This counter is incremented when a RELEASE,
RELEASE COMPLETE (only when not preceded by a RELEASE
message for the … | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.37.1.14.1.3.1.6 |
| atmSigDetectUnavailResrcs Number of Resource Unavailability detected on this
interface. This counter is incremented when a RELEASE,
RELEASE COMPLETE (only when not preceded by a RELEASE
message for the sa… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.37.1.14.1.3.1.7 |
| atmSigEmitUnavailResrcs Number of Resource Unavailability transmitted from this
interface. This counter is incremented when a RELEASE,
RELEASE COMPLETE (only when not preceded by a RELEASE message
for t… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.37.1.14.1.3.1.8 |
| atmSigDetectCldPtyEvents Number of Called Party Responsible For Unsuccessful Call
detected on this interface. This counter is incremented when a
RELEASE, RELEASE COMPLETE (only when not preceded by a REL… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.37.1.14.1.3.1.9 |