eSWRemoteDownloadFile

ASANTE-SWITCH-MIB · .1.3.6.1.4.1.298.1.5.1.1.1.3
MIB view Table view

Object

scalar mandatory r/w Enumeration 
Downloading what kind of file. The
configuration file name should be stored in the
agentRemoteBootFile MIB object, and the image file
name should be stored in the eSWImageFileName
MIB object.  If this object has the value
Config-File(1), agentRemoteBootProtocol cannot be
set to bootp-tftp(2).  If agentRemoteBootProtocol
is set to bootp-tftp(2), this object cannot be
set to Config-File(1).
          
This object value is meaningful only at download
time.

Context

MIB
ASANTE-SWITCH-MIB
OID
.1.3.6.1.4.1.298.1.5.1.1.1.3
Type
scalar
Access
readwrite
Status
mandatory
Parent
eSWAgentSW
Siblings
21

Syntax

Enumeration

Values & Constraints

Enumerated Values
1other
2config-File
3image-File

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
eSWUpDownloadAction mandatory
Agent upload/download action. May refer to the configuration file or image file. The upload action is valid only for the configuration file.
scalarEnumeration.1.3.6.1.4.1.298.1.5.1.1.1.1
eSWActiveImageBank mandatory
The image bank from which runtime code will be loaded at next boot. If the value is set to other(1) the agent will boot from the default bank, i.e. Bank1(2).
scalarEnumeration.1.3.6.1.4.1.298.1.5.1.1.1.10
eSWRemoteDownloadImageBank mandatory
The number of the destination bank to which the image will be downloaded. 'other' will be recognized as the default bank, i.e. bank 1.
scalarEnumeration.1.3.6.1.4.1.298.1.5.1.1.1.11
eSWResetWaitTime mandatory
The time to wait before executing a reset of the agent. The time is in seconds, with a range of 1 second to 1 day.
scalarInteger32.1.3.6.1.4.1.298.1.5.1.1.1.12
eSWResetLeftTime mandatory
Time left until the agent will reset. If a reset request is not in progress, this should have a value of 0.
scalarInteger32.1.3.6.1.4.1.298.1.5.1.1.1.13
eSWBankImageInfoTable mandatory
A table of information about the switch's image banks.
table-.1.3.6.1.4.1.298.1.5.1.1.1.14
eSWTelnetSessions mandatory
Number of concurrent Telnet sessions the agent will support.
scalarInteger32.1.3.6.1.4.1.298.1.5.1.1.1.15
eSWTelnetSessionActive mandatory
Number of Telnet sessions active. This value cannot be greater than the value of eSWTelnetSessions.
scalarInteger32.1.3.6.1.4.1.298.1.5.1.1.1.16
eSWTelnetTimeOut mandatory
Telnet session time-out value, in minutes. The default for this object is 5 minutes.
scalarInteger32.1.3.6.1.4.1.298.1.5.1.1.1.17
eSWSTP mandatory
Setting this value to enable(2) will cause the switch to perform the Spanning Tree Algorithm as described in IEEE 802.1d.Setting it to disable(3) will stop the Spanning Tree Algor…
scalarEnumeration.1.3.6.1.4.1.298.1.5.1.1.1.18
eSWUserInterfaceTimeOut mandatory
The console interface time-out value, in minutes. A value of 0 means that the console interface will not time out. The default is 5 minutes.
scalarInteger32.1.3.6.1.4.1.298.1.5.1.1.1.19
eSWUpDownloadStatus mandatory
Result of the last upload/download request by this agent.
scalarEnumeration.1.3.6.1.4.1.298.1.5.1.1.1.2
eSWBCastMcastThreshold mandatory
The switch will detect a Broadcast or Multicast storm on the network based on the value of this object. This value is represented as number of packets per second. The value must…
scalarInteger32.1.3.6.1.4.1.298.1.5.1.1.1.20
eSWBCastMcastDuration mandatory
The switch will detect a Broadcast or Multicast storm on the network based on the value represented by this object. The switch will declare that a storm is present if the bcast/mc…
scalarInteger32.1.3.6.1.4.1.298.1.5.1.1.1.21
eSWCfgFileErrStatus mandatory
This object represents the results of previous Config File download operation. Each bit from least Significant bit represent a configuration section in the switch. Value 1 for a b…
scalarOctetString.1.3.6.1.4.1.298.1.5.1.1.1.22
eSWRemoteConfigServer mandatory
The IP address of the configuration file server.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.298.1.5.1.1.1.4
eSWRemoteConfigFileName mandatory
The name of switch configuration file. The server's IP address is in eSWRemoteConfigServer.
scalarOctetString.1.3.6.1.4.1.298.1.5.1.1.1.5
eSWConfigRetryCounter mandatory
The number of times the agent will retry a failed image file download.
scalarInteger32.1.3.6.1.4.1.298.1.5.1.1.1.6
eSWRemoteImageServer mandatory
The IP address of the image file server.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.298.1.5.1.1.1.7
eSWRemoteImageFileName mandatory
The name of the switch image file.
scalarOctetString.1.3.6.1.4.1.298.1.5.1.1.1.8
eSWImageRetryCounter mandatory
The number of times the agent will retry a failed configuration file download.
scalarInteger32.1.3.6.1.4.1.298.1.5.1.1.1.9