asamSystemRFOverlayModule
ASAM-SYSTEM-MIB ·
.1.3.6.1.4.1.637.61.1.9.57
Object
scalar
r/w
Enumeration
This MIB object is used to enable or disable the RF Overlay Module (SX-8F and SX-16F only).
This MIB object is only supported on some equipment practices.
If not supported this MIB object will return disabled when read.
ALCATEL NOTE:
SUPPORT: YES
PERSIST: YES
INSRVMOD: NA
RANGE: 1..2
DEFVALUE: 1
UNITS: NA
Context
- MIB
- ASAM-SYSTEM-MIB
- OID
.1.3.6.1.4.1.637.61.1.9.57- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- asamSystemMIB
- Siblings
- 54
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | affected |
2 | notAffected |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| asamNetworkPosition obsolete Indicates whether the ASAM is a hub-ASAM (1) or a subtending ASAM.
The default is hub-ASAM. | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.9.10 |
| asamSystemMigration | node | - | .1.3.6.1.4.1.637.61.1.9.11 |
| asamSystemClockSelect | node | - | .1.3.6.1.4.1.637.61.1.9.12 |
| asamMibVersion This variable identifies the version of the management interface
of the ASAM, i.e. it uniquely identifies the complete set of MIBs
that together constitute the management interfac… | scalar | OctetString | .1.3.6.1.4.1.637.61.1.9.13 |
| asamSystemInitProgress Progress of the system initialization indicated as a percentage.
When the system starts its initialization, it will at first not be
reachable for SNMP managers. Howeve… | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.9.15 |
| asamPnPEnable This variable allows the manager to enable/disable the Plug-and-Play
functionality. When enabled, the ASAM will, upon installation, start
up autonomously without intervention of … | scalar | Enumeration | .1.3.6.1.4.1.637.61.1.9.16 |
| asamSystemLicenseMgmt | node | - | .1.3.6.1.4.1.637.61.1.9.17 |
| asamSysBootpInfo | node | - | .1.3.6.1.4.1.637.61.1.9.2 |
| asamSuperuserAuthByRadius The TL1/CLI user ID SUPERUSER/isadmin is optionally authenticated by
RADIUS based on this object. When disabled, SUPERUSER/isadmin is always
authenticated by the local user databa… | scalar | Enumeration | .1.3.6.1.4.1.637.61.1.9.20 |
| asamSysMacAdresses | node | - | .1.3.6.1.4.1.637.61.1.9.22 |
| timeZoneOffset This object allows a manager to set the Time Zone Offset of the
system.
ALCATEL NOTE:
SUPPORT: YES
PERSIST: YES
INSRVMOD: NA
RANGE: … | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.9.24 |
| asamCraftLogin | node | - | .1.3.6.1.4.1.637.61.1.9.25 |
| asamAccessLoopIdSyntax | node | - | .1.3.6.1.4.1.637.61.1.9.26 |
| environmentMonitorRelay | node | - | .1.3.6.1.4.1.637.61.1.9.27 |
| swVersion | node | - | .1.3.6.1.4.1.637.61.1.9.28 |
| systemMonitor | node | - | .1.3.6.1.4.1.637.61.1.9.29 |
| asamSystemID The asamSystemID object represents the SID (System ID) of the NE
and is used to identify the NE.
The System ID may only include printable ASCII characters from '!'
(33 … | scalar | OctetString | .1.3.6.1.4.1.637.61.1.9.3 |
| asamSystemAccessOperatorID The Access Operator ID is a unique identifier representing an operator.
This identifier is randomly generated by ALU, then assigned to an
operator.
The identifier is co… | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.9.33 |
| asamSystemActivatedCDE The Activated CDE is a bitmap listing the CDE features that are active.
CDE features are activated during system startup only, and are
based on the configured Access Op… | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.9.34 |
| asamSystemPortAddressingMode This object allows the manager to configure the faceplate port
addressing mode used by operators in CLI and TL1.
With the mode set to <sequential>, the operator must specify the p… | scalar | Enumeration | .1.3.6.1.4.1.637.61.1.9.35 |
| peripheralMgntMacFilterTable The peripheral management mac filter table.
For enhanced security in remote cabinets, it is possible to restrict
allowed destination MAC addresses in upstream Ethernet … | table | - | .1.3.6.1.4.1.637.61.1.9.36 |
| asamLiSeparate Parameter used to create a separate LI management plane; i.e to
restrict creation/modification of operators that can access lawful
intercept data. This object is not applicable to… | scalar | Enumeration | .1.3.6.1.4.1.637.61.1.9.37 |
| asamSysStatusBitMap Status bitmap:
Bit 0: bit 0 is set if and only if none of the other bits is set.
Bit 1: bit 1 set indicates that persistent data has been lost
including data necessary to e… | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.9.4 |
| asamSystemALSState Parameter used to enable / disable ALS (Automatic Laser Shutdown) system wide.
ALS enable / disable will be applied only for NT & NTIO xFPs.
'disabled':
System wide… | scalar | Enumeration | .1.3.6.1.4.1.637.61.1.9.41 |
| asamSystemCustomerId A textual string identifying the customer assigned in system level.
Default value is 'available', which means system customer id is
not configured.
ALCATEL NOTE:
SUPP… | scalar | OctetString | .1.3.6.1.4.1.637.61.1.9.43 |
| asamSystemAutoSwitchAtmPtm This parameter allows the manager to enable or disable an Auto-Switching
between ATMoADSLx and PTMoVDSLx at system wide.
The supported values are,
1 (enable) - enables auto-swit… | scalar | Enumeration | .1.3.6.1.4.1.637.61.1.9.44 |
| asamSystemAutoSwitchVdslStepUpDelay This parameter allows the manager to set delay time (in seconds) for
auto-switch stepup to VDSL service. The auto-switch step-up request for
VDSL service will be considered for th… | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.9.45 |
| asamSystemUplinkMode Parameter used to configure uplink mode.
Notes:
After changing uplink-mode, new value only takes effect after system reboot.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: Y… | scalar | Enumeration | .1.3.6.1.4.1.637.61.1.9.46 |
| asamSystemCurrentUplinkMode Parameter used to current uplink mode.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: NA
PERSIST: YES DEFVALUE: NA UNITS: NA | scalar | Enumeration | .1.3.6.1.4.1.637.61.1.9.47 |
| asamSystemVoiceOswp The voice software when system startup.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: 0..2
PERSIST: YES DEFVALUE: sip(2) UNITS: - | scalar | Enumeration | .1.3.6.1.4.1.637.61.1.9.48 |
| asamSystemActivatedCDEExtended The Activated CDE is a bitmap listing the CDE features that are active.
CDE features are activated during system startup only, and are
based on the configured Access Op… | scalar | OctetString | .1.3.6.1.4.1.637.61.1.9.49 |
| asamSysStatusClearBitMap Clear status bitmap:
In order to be able to clear the status bitmap, e.g. to clear the loss
of persistent data alarm, this bitmap has to be used by writing a 1 to
the correspondin… | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.9.5 |
| asamSuperuserAuthByTacacsPlus The TL1/CLI user ID SUPERUSER/isadmin is optionally authenticated by
Tacacs+ based protocol on this object. When disabled, SUPERUSER/isadmin
is always authenticated by the local u… | scalar | Enumeration | .1.3.6.1.4.1.637.61.1.9.50 |
| asamExternalLedsStatus This MIB object is used to administratively turn off LEDs which are visible from the
outside on some equipment practices like sealed remotes. By default, LEDs are enabled which
me… | scalar | Enumeration | .1.3.6.1.4.1.637.61.1.9.51 |
| asamSystemMirrorVoice Enable/disable voice mirror of ingress/egress/both voice packets.
Default value is Disabled
ALCATEL NOTE:
ACCESS: NA USAGE: OPT
PERSIST: YES INSR… | scalar | Enumeration | .1.3.6.1.4.1.637.61.1.9.52 |
| techSupport | node | - | .1.3.6.1.4.1.637.61.1.9.53 |
| asamSystemScalingMode An enum indicating configured scaling mode of BroadCom switch. Applicable for FX next generation NT(FANT-G).
l2plus-Mode with L2 FDB table having higher scaling of 256K with l3 sc… | scalar | Enumeration | .1.3.6.1.4.1.637.61.1.9.54 |
| asamSystemOperationalScalingMode An enum indicating operational scaling mode of BroadCom switch. Applicable for FX next generation NT(FANT-G).
l2plus-Mode with L2 FDB table having higher scaling of 256K with l3 s… | scalar | Enumeration | .1.3.6.1.4.1.637.61.1.9.55 |
| asamSystemZTPState Enable/disable the ZTP (Zero Touch Provision) functionality
This attribute is only available on equipment practices
that support this feature.
If not supported this MIB object wil… | scalar | Enumeration | .1.3.6.1.4.1.637.61.1.9.56 |
| asamRelayIdSyntax | node | - | .1.3.6.1.4.1.637.61.1.9.58 |
| asamSystemArpPollingInterval The value of the object asamSystemArpPollingInterval specifies ARP polling interval. The range of the value is from 120s to 1096s.The default polling interval is 120s.
ALCATEL NOT… | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.9.59 |
| asamSysStatusSetBitMap obsolete Set status bitmap:
In order to be able to set the status bitmap, this bitmap has to be
used by writing a 1 to the corresponding bit position. | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.9.6 |
| asamUplinkOutbandMgntIpAddress This MIB object is used to save uplink based out-band manangement IP.
This MIB object is only supported on 7363 MX and 7367 8F/16F/48U SX (Spumante based IWF).
ALCATE… | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.637.61.1.9.60 |
| asamUplinkOutbandMgntNetMask This MIB object is used to save uplink based out-band manangement IP's netmask.
This MIB object is only supported on 7363 MX and 7367 8F/16F/48U SX (Spumante based IWF).
… | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.637.61.1.9.61 |
| asamDstRecurringConfTable The asamDstRecurringConfTable has an entry for each daylight saving time
zone information with the specified week and weekday repeatedly.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD… | table | - | .1.3.6.1.4.1.637.61.1.9.62 |
| asamDstDateConfTable The asamDstDateConfTable has an entry for each daylight saving time
zone information with the specified with the corresponding specified days some year.
ALCATEL NOTE:
SUPPORT… | table | - | .1.3.6.1.4.1.637.61.1.9.63 |
| asamDstEnableDisable This node indicates the status of daylight saving time.
If the value of this node is enable, means that daylight saving time is
enabled.
If the value is disable, means that daylig… | scalar | Enumeration | .1.3.6.1.4.1.637.61.1.9.64 |
| asamDstIsAffected This node indicates whether daylight saving time comes into effect or not.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..2
PERSIST: YES DEFVALUE: notAf… | scalar | Enumeration | .1.3.6.1.4.1.637.61.1.9.65 |
| asamSystemBSNAPState BSNAP is a trace mechanism to keep binary snapshot trace of an sw error deteted, and this MIB object is used to enable of disable BSNAP
ALCATEL NOTE:
SUPPORT: YES
P… | scalar | Enumeration | .1.3.6.1.4.1.637.61.1.9.66 |
| asamSystemBSNAPServerIP BSNAP is a trace mechanism to keep binary snapshot trace of an sw error deteted, and this MIB object is used to set the BSNAP server IP
ALCATEL NOTE:
SUPPORT: YES
P… | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.637.61.1.9.67 |
| asamSystemBSNAPServerPort BSNAP is a trace mechanism to keep binary snapshot trace of an sw error deteted, and this MIB object is used to set the BSNAP server UDP port
ALCATEL NOTE:
SUPPORT: Y… | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.9.68 |
| asamAWSnumberOfSets obsolete Reserved for AWS for synchronisation purposes. | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.9.7 |
| asamDiskStatusBitMap obsolete Disk status bitmap:
Bit 0: by setting bit 0, all persistent data is synced (forced) to
disk.
Bit 1: by setting bit 1, the ASAM disk is locked, otherwise the ASAM
dis… | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.9.8 |
| asamShutdownBitMap Shutdown bitmap:
Bit 0: by setting bit 0, the ASAM is prepared for shutdown;
it is recommended to do this before extracting the active NT
in a simplex system; the bi… | scalar | Integer32 | .1.3.6.1.4.1.637.61.1.9.9 |