dot1qFutureVlanVoiceVlan
ARICENT-VLAN-MIB ·
.1.3.6.1.4.1.2076.65.1.34
Object
The default voice VLAN. A non-zero value indicates that automated VoIP device discovery and/or voice VLAN-related configuration can be performed using this value (if applicable). A zero value indicates that a default voice VLAN has not been defined.
Context
- MIB
- ARICENT-VLAN-MIB
- OID
.1.3.6.1.4.1.2076.65.1.34- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- dot1qFutureVlan
- Siblings
- 38
Syntax
Q-BRIDGE-MIBVlanIdOrNone
- Source
- Q-BRIDGE-MIBVlanIdOrNone
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..4094
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dot1qFutureVlanStatus This object specifies the administrative status requested by management for the VLAN
feature. The value enabled(1) indicates that VLAN should be enabled
in the device on all po… | scalar | EnabledStatus | .1.3.6.1.4.1.2076.65.1.1 |
| dot1qFutureVlanPortTable Table containing the port type information. | table | - | .1.3.6.1.4.1.2076.65.1.10 |
| dot1qFutureVlanPortMacMapTable A table that contains information on VLAN-MAC address
mapping. | table | - | .1.3.6.1.4.1.2076.65.1.11 |
| dot1qFutureVlanFidMapTable This table contains information about the filtering database identifier
(FID) used by VLAN's to make forwarding decisions. VLAN's can be mapped
to use the same FID to share filte… | table | - | .1.3.6.1.4.1.2076.65.1.12 |
| dot1qFutureVlanOperStatus This object specifies the operational status of the VLAN module.
The value enabled(1) indicates that VLAN module is currently enabled
in the device.
The value disabled(2) indi… | scalar | EnabledStatus | .1.3.6.1.4.1.2076.65.1.13 |
| dot1qFutureGvrpOperStatus The operational status of the GVRP module.
The value enabled(1) indicates that GVRP module is currently enabled
in the device.
The value disabled(2) indicates that GVRP module… | scalar | EnabledStatus | .1.3.6.1.4.1.2076.65.1.14 |
| dot1qFutureGmrpOperStatus The operational status of the GMRP module.
The value enabled(1) indicates that GMRP module is currently enabled
in the device.
The value disabled(2) indicates that GMRP module… | scalar | EnabledStatus | .1.3.6.1.4.1.2076.65.1.15 |
| dot1qFutureVlanCounterTable The table contains the statistics on a per VLAN basis.
It contains number of unicast, broadcast and unknown unicast
packets flooded per VLAN. | table | - | .1.3.6.1.4.1.2076.65.1.16 |
| dot1qFutureVlanUnicastMacControlTable A table containing per VLAN Unicast MAC address control information.
The control information includes the status of unicast MAC address
learning as well as restricting the numbe… | table | - | .1.3.6.1.4.1.2076.65.1.17 |
| dot1qFutureGarpDebug Enables the tracing in the selected submodule in GARP. A 32 bit integer
is used to store the tracing level in the specified module.
Different Tracing Levels -
BIT 0 - Initiali… | scalar | Integer32 | .1.3.6.1.4.1.2076.65.1.18 |
| dot1qFutureVlanTpFdbTable An extension to the dot1qTpFdbTable contains information
about unicast entries only learned via pseudowire
for which the device has forwarding and/or filtering
information. This i… | table | - | .1.3.6.1.4.1.2076.65.1.19 |
| dot1qFutureVlanMacBasedOnAllPorts This object is used to enable/disable the MAC based type on all ports
of dot1qFutureVlanPortMacBasedClassification. | scalar | EnabledStatus | .1.3.6.1.4.1.2076.65.1.2 |
| dot1qFutureVlanWildCardTable Wild card VLAN (Id : 0xFFF) static filtering information
will be used for all VLANs for which there is no specific
static filtering exists in dot1qStaticUnicastTable or
dot1qSt… | table | - | .1.3.6.1.4.1.2076.65.1.20 |
| dot1qFutureStaticUnicastExtnTable A table containing filtering information for Unicast
MAC addresses for each Filtering Database, configured
into the device by (local or network) management
specifying the set of p… | table | - | .1.3.6.1.4.1.2076.65.1.21 |
| dot1qFutureUnicastMacLearningLimit This object specifies the limiting value on the number of distinct
unicast MAC addresses that can be learnt in the device.
The upper limit value that can be SET for thi… | scalar | Unsigned32 | .1.3.6.1.4.1.2076.65.1.22 |
| dot1qFutureVlanBaseBridgeMode This object specifies base Bridge-Mode of the Switch.
Setting the value to transparent mode will make
switch behave according to IEEE 802.1d implementation.
Setting the value to V… | scalar | Enumeration | .1.3.6.1.4.1.2076.65.1.23 |
| dot1qFutureVlanSubnetBasedOnAllPorts This object is used to enable/disable the subnet based VLAN classification
on all ports of dot1qFutureVlanPortSubnetBasedClassification. On setting
this object to enable/disable s… | scalar | EnabledStatus | .1.3.6.1.4.1.2076.65.1.24 |
| dot1qFutureVlanPortSubnetMapTable Subnet based VLAN classification - The source IP-subnet address in
the incoming packets is used to classify VLAN membership.
Subnet based VLAN is applied only on IP/ARP packets.
… | table | - | .1.3.6.1.4.1.2076.65.1.25 |
| dot1qFutureVlanGlobalMacLearningStatus This object specifies the global MAC learning status of the
switch. The default value of global MAC learning status of
the switch is enabled.
This object can take only two values… | scalar | EnabledStatus | .1.3.6.1.4.1.2076.65.1.26 |
| dot1qFutureVlanApplyEnhancedFilteringCriteria If this object is set as 'false', then only default filtering
utility criteria will be applied on all ports.
Otherwise the filtering criteria to be used for the ports
will be tak… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.65.1.27 |
| dot1qFutureVlanSwStatsEnabled If set to 'true', statistics collection will be done and stored in
software. This object can be set to 'true' only if the data switching
is done by software.
If set to 'false', t… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.65.1.28 |
| dot1qFutureStVlanExtTable An extension to dot1qVlanStaticTable VLAN table. | table | - | .1.3.6.1.4.1.2076.65.1.29 |
| dot1qFutureVlanPortProtoBasedOnAllPorts This object is only used to enable/disable the port protocol based type on all ports
of dot1qFutureVlanPortPortProtoBasedClassification. | scalar | EnabledStatus | .1.3.6.1.4.1.2076.65.1.3 |
| dot1qFutureVlanPortSubnetMapExtTable Subnet based VLAN classification - The source IP-subnet address in
the incoming packets is used to classify VLAN membership.
Subnet based VLAN is applied only on IP/ARP packets.
… | table | - | .1.3.6.1.4.1.2076.65.1.30 |
| dot1qFutureVlanGlobalsFdbFlush If this object is set as 'true', then all the dynamically learnt
MAC addresses will be removed. After flush, this object
is set to 'false'. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.65.1.31 |
| dot1qFutureVlanUserDefinedTPID This object sets the value for the user defined TPID configurable
for an ingress port or for a VLAN egress Ethertype.
A value ZERO deletes the configured entry. | scalar | Integer32 | .1.3.6.1.4.1.2076.65.1.32 |
| dot1qFutureVlanLoopbackTable This table contains the Loopback Status for all VLANs. | table | - | .1.3.6.1.4.1.2076.65.1.33 |
| dot1qFutureVlanVoicePriority The default voice VLAN 802.1p user priority. | scalar | Integer32 | .1.3.6.1.4.1.2076.65.1.35 |
| dot1qFutureVlanVoiceDscp The default voice VLAN DSCP. | scalar | Integer32 | .1.3.6.1.4.1.2076.65.1.36 |
| dot1qFutureVlanVoiceVlanTagging The default voice VLAN tagging status. Voice
traffic is considered tagged by default. A value
of 'untagged(2)' indicates that voice traffic will
be untagged (port PVID set to the… | scalar | Enumeration | .1.3.6.1.4.1.2076.65.1.37 |
| dot1qFutureVlanVoiceDataVlan The data VLAN that is associated with the default
voice VLAN. | scalar | Q-BRIDGE-MIBVlanIdOrNone | .1.3.6.1.4.1.2076.65.1.38 |
| dot1qFutureVlanVoiceDataVlanTagging The tagging status for the data VLAN that is
associated with the default voice VLAN. Data
traffic is considered untagged by default. A value
of 'tagged(1)' indicates that data tra… | scalar | Enumeration | .1.3.6.1.4.1.2076.65.1.39 |
| dot1qFutureVlanVoiceUplink Specifies an interface to be considered for
VLAN membership updates when VLAN membership
updates are initiated by the VLAN voice support.
An uplink interface is specifi… | scalar | OctetString | .1.3.6.1.4.1.2076.65.1.40 |
| dot1qFutureVlanShutdownStatus deprecated This object specifies the administrative shutdown status requested by management for VLAN
The value true(1) indicates that VLAN should be shutdown
in the device on all ports. … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.65.1.5 |
| dot1qFutureGarpShutdownStatus This object specifies the administrative status requested by management for GARP.
The value true(1) indicates that GARP should be shutdown
in the device on all ports. All memo… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.65.1.6 |
| dot1qFutureVlanDebug Enables the tracing in the selected submodule in VLAN. A 32 bit integer
is used to store the tracing level in the specified module.
Different Tracing Levels -
BIT 0 - Initiali… | scalar | Integer32 | .1.3.6.1.4.1.2076.65.1.7 |
| dot1qFutureVlanLearningMode This object specifies the type of VLAN learning mode.
When the object value is modified, the static
fid-vlan mappings and static unicast entries
need to be reconfigured. Static un… | scalar | Enumeration | .1.3.6.1.4.1.2076.65.1.8 |
| dot1qFutureVlanHybridTypeDefault The default learning mode of the switch if
dot1qFutureVlanLearningMode is hvl (3).
When the object value is modified, the static
fid-vlan mappings and static unicast entries
need… | scalar | Enumeration | .1.3.6.1.4.1.2076.65.1.9 |