futOspfv3RestartStrictLsaChecking
ARICENT-OSPFV3-MIB ·
.1.3.6.1.4.1.2076.90.1.10
Object
Indicates if strict LSA checking is enabled for graceful restart. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
Context
- MIB
- ARICENT-OSPFV3-MIB
- OID
.1.3.6.1.4.1.2076.90.1.10- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- futospfv3GeneralGroup
- Siblings
- 23
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| futOspfv3OverFlowState Indicates whether router is in overflow state or not. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.90.1.1 |
| futOspfv3HelperSupport The router's helper support for OSPFv3 graceful restart.
Options include: unknown,softwarerestart,swreloadupgrade,
switchtoredundant.
futOspfv3HelperSupport is indicated by bitmap… | scalar | Bits | .1.3.6.1.4.1.2076.90.1.11 |
| futOspfv3HelperGraceTimeLimit Configured OSPFv3 graceful restart interval limit in helper side.
Time is configured in seconds. If this object is set to 0, then the helper accepts the restarting router's
grace… | scalar | Integer32 | .1.3.6.1.4.1.2076.90.1.12 |
| futOspfv3RestartAckState Indicates Reception required / not-required . whether GraceLSAs
sent by this router are expected to be acknowledged by peers.
This object is persistent and when written… | scalar | Enumeration | .1.3.6.1.4.1.2076.90.1.13 |
| futOspfv3GraceLsaRetransmitCount Number of retransmissions for unacknowledged GraceLSAs | scalar | Integer32 | .1.3.6.1.4.1.2076.90.1.14 |
| futOspfv3RestartReason The router's restarter reason code of OSPFv3 graceful restart.
Options include: unknown,softwarerestart,swreloadupgrade,
switchtoredundant.
This object is persistent and when writ… | scalar | Enumeration | .1.3.6.1.4.1.2076.90.1.15 |
| futOspfv3ExtTraceLevel This object is used to define level of trace required for OSPFv3 GR.
Levels are defined as follows.
0x00000000 -- No Trace Support.
0x00000001 -- Restarting Router Trace.
0x0000… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.90.1.16 |
| futOspfv3SetTraps This object is used to enable and disable specific
OSPFv3 traps. Currently the following are defined
0x00000000 - Traps are not enabled.
0x00000001 - Restarting router status cha… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.90.1.17 |
| futOspfv3HotStandbyAdminStatus High Availabilty feature enabled or disabled in OSPFv3 | scalar | Enumeration | .1.3.6.1.4.1.2076.90.1.18 |
| futOspfv3HotStandbyState Internal State of the OSPFv3 instance.
init(1) - OSPFv3 instance is up and RM State is undetermined.
activeStandbyUp(2) - The RM state is active & standby is up.
activeStandbyDown… | scalar | Enumeration | .1.3.6.1.4.1.2076.90.1.19 |
| futOspfv3TraceLevel This object is used to define level of trace required for OSPF.
Levels are defined as follows.
0x00000100 -- Packet High Level Dump Trace.
0x00000200 -- Packet Low Level Dump Tra… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.90.1.2 |
| futOspfv3DynamicBulkUpdStatus Status of dynamic bulk update between active and dynamic
OSPFv3 instance.
notStarted(1): Dynamic Bulk Update has not yet been started.
inProgress(2): Dynamic Bulk Update is… | scalar | Enumeration | .1.3.6.1.4.1.2076.90.1.20 |
| futOspfv3StandbyHelloSyncCount Total number of hello packets synced to standby node. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.90.1.21 |
| futOspfv3StandbyLsaSyncCount Total number of LSAs synced to standby node. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.90.1.22 |
| futOspfv3BfdStatus This object enables/disables BFD feature in OSPFv3.
If enabled, OSPFv3 registers with BFD for neighbor IP path monitoring | scalar | Enumeration | .1.3.6.1.4.1.2076.90.1.23 |
| futOspfv3BfdAllIfState This object enables/disables BFD for all OSPFv3 interfaces.
If enabled, OSPFv3 registers with BFD for neighbor
IP path monitoring, when the OSPFv3 neighbor state
is FULL. Enablin… | scalar | Enumeration | .1.3.6.1.4.1.2076.90.1.24 |
| futOspfv3ABRType Different Types of ABRs supported | scalar | Enumeration | .1.3.6.1.4.1.2076.90.1.3 |
| futOspfv3NssaAsbrDefRtTrans Specifies the P-Bit setting for the default Type-7
LSA generated by ASBR(which is not ABR).When set
disabled, P-Bit is clear in the generated default Lsa.
When set to enabled, P-… | scalar | Enumeration | .1.3.6.1.4.1.2076.90.1.4 |
| futOspfv3DefaultPassiveInterface When set to true all OSPF interfaces created after this
setting will be passive interfaces.
If set to false OSPF interfaces created after this setting
will not be passive. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.90.1.5 |
| futOspfv3SpfDelay The Delay at which routing calculation is carried after a
topology change. | scalar | Integer32 | .1.3.6.1.4.1.2076.90.1.6 |
| futOspfv3SpfHoldTime The minimum time between two consecutive SPF calculations. | scalar | Integer32 | .1.3.6.1.4.1.2076.90.1.7 |
| futOspfv3RTStaggeringInterval This object denotes the time interval in milliseconds after which the route
calculation is suspended for doing all other OSPFv3 operations. Refault value of
this object is equal t… | scalar | Integer32 | .1.3.6.1.4.1.2076.90.1.8 |
| futOspfv3RTStaggeringStatus This object indicates the status of route table calculation
staggering option | scalar | Enumeration | .1.3.6.1.4.1.2076.90.1.9 |