ARICENT-OSPFV3-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
10
Rows
10
Columns
84

futOspfv3IfTable

table
.1.3.6.1.4.1.2076.90.2 · 1 row entry · 27 columns
Open in standard view 
The OSPFv3 Interface Table describes the  inter-
faces from the viewpoint of OSPFv3.
futOspfv3IfEntry entry .1.3.6.1.4.1.2076.90.2.1
The OSPFv3 Interface Entry describes one inter-
face from the viewpoint of OSPFv3.
Indexes
futOspfv3IfIndex
Column Syntax OID
futOspfv3IfIndex
The interface index of this OSPFv3 interface.
It corresponds to the interface index of the
IPv6 interface on which OSPFv3 is configured.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2076.90.2.1.1
futOspfv3IfOperState
This gives the Operational Status of the Interface.
Enumeration
Enumerated Values:
1operup
2operdown
3loopback
4unloop
 .1.3.6.1.4.1.2076.90.2.1.2
futOspfv3IfPassive
This object is used to make the inteface as passive.
If set to TRUE, then interface will be passive
If set to FALSE then interface will be normal
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2076.90.2.1.3
futOspfv3IfNbrCount
This gives the Total number of Neighbour's through
that Interface.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.90.2.1.4
futOspfv3IfAdjCount
This gives the Total number of Adjacencies through
that Interface.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.90.2.1.5
futOspfv3IfHelloRcvd
This gives the Total number of Hello packets received
through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.90.2.1.6
futOspfv3IfHelloTxed
This gives the Total number of Hello packets
transmitted through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.90.2.1.7
futOspfv3IfHelloDisd
This gives the Total number of Hello packets
discarded through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.90.2.1.8
futOspfv3IfDdpRcvd
This gives the Total number of Ddp packets received
through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.90.2.1.9
futOspfv3IfDdpTxed
This gives the Total number of Ddp packets
transmitted through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.90.2.1.10
futOspfv3IfDdpDisd
This gives the Total number of Ddp packets discarded
through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.90.2.1.11
futOspfv3IfLrqRcvd
This gives the Total number of Lrq packets received
through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.90.2.1.12
futOspfv3IfLrqTxed
This gives the Total number of Lrq packets
transmitted through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.90.2.1.13
futOspfv3IfLrqDisd
This gives the Total number of Lrq packets discarded
through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.90.2.1.14
futOspfv3IfLsuRcvd
This gives the Total number of Lsu packets received
through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.90.2.1.15
futOspfv3IfLsuTxed
This gives the Total number of Lsu packets
transmitted through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.90.2.1.16
futOspfv3IfLsuDisd
This gives the Total number of Lsu packets discarded
through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.90.2.1.17
futOspfv3IfLakRcvd
This gives the Total number of Lak packets received
through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.90.2.1.18
futOspfv3IfLakTxed
This gives the Total number of Lak packets
transmitted through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.90.2.1.19
futOspfv3IfLakDisd
This gives the Total number of Lak packets discarded
on that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.90.2.1.20
futOspfv3IfLinkLSASuppression
Specifies whether or not link LSA origination is
suppressed for networks other than broadcast or NBMA.
The object is set to value true (1) to suppress
the origination.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2076.90.2.1.21
futOspfv3IfBfdState
This object enables/disables BFD in a specific OSPFv3 interface.
This object is set to enabled internally for particular interface entry,
when futOspfv3BfdAllIfState is enabled.

If futOspfv3BfdAllIfState…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.90.2.1.22
futOspfv3IfCryptoAuthType
This object specifies the SHA crypto authentication type to be used on the interface
Enumerationr/w
Enumerated Values:
1sha1
3sha256
4sha384
5sha512
6none
 .1.3.6.1.4.1.2076.90.2.1.23
futOspfv3IfCryptoAuthMode
This object specifies the crypto authentication mode to be used on the interface
Enumerationr/w
Enumerated Values:
1full
2transition
3none
 .1.3.6.1.4.1.2076.90.2.1.24
futOspfv3IfAuthTxed
This object specifies the total number of Authentication Trailer packets
transmitted on the interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.90.2.1.25
futOspfv3IfAuthRcvd
This object specifies the total number of Authentication Trailer packets
received on the interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.90.2.1.26
futOspfv3IfAuthDisd
This object specifies the Total number of Authentication Trailer packets
discarded on the interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.90.2.1.27

futOspfv3RoutingTable

table
.1.3.6.1.4.1.2076.90.3 · 1 row entry · 10 columns
Open in standard view 
A table of routing information.
futOspfv3RoutingEntry entry .1.3.6.1.4.1.2076.90.3.1
The information regarding a single route.
Indexes
futOspfv3RouteDestType futOspfv3RouteDest futOspfv3RoutePfxLength futOspfv3RouteNextHopType futOspfv3RouteNextHop
Column Syntax OID
futOspfv3RouteDestType
The prefix type of futOspfv3RouteDestType. Only
IPv6 addresses are expected.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2076.90.3.1.1
futOspfv3RouteDest
The Desitnation IPv6 Address of this route.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.2076.90.3.1.2
futOspfv3RoutePfxLength
Indicates the prefix length of the destination Address.
INET-ADDRESS-MIBInetAddressPrefixLength
Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.2076.90.3.1.3
futOspfv3RouteNextHopType
The prefix type offutOspfv3RouteNextHopType. Only
IPv6 addresses are expected.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2076.90.3.1.4
futOspfv3RouteNextHop
Next Hop IPv6 Address for this route. For direct routes it has the
value ::0.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.2076.90.3.1.5
futOspfv3RouteType
Type of the route
Enumeration
Enumerated Values:
1intraArea
2interArea
3type1External
4type2External
5type1ExternalNssa
6type1ExternalNssa
 .1.3.6.1.4.1.2076.90.3.1.6
futOspfv3RouteAreaId
Area ID associated with the route
OSPF-MIBAreaID
Textual Convention: OSPF-MIBAreaID OctetString
 .1.3.6.1.4.1.2076.90.3.1.7
futOspfv3RouteCost
It is a Type 1 external metrics which is
expressed in the same units as OSPF interface
cost ie. in terms of the OSPF link state metric.
If Type1 and Type2 cost are present, Type1 external
metrics always take precedenc…
OSPF-MIBBigMetric
Textual Convention: OSPF-MIBBigMetric Integer32
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.2076.90.3.1.8
futOspfv3RouteType2Cost
Type 2 external metrics are configured with
the cost greater than any path internal to the AS.
Use of Type 2 external metrics assumes that routing
between AS is the major cost of routing a packet, and
eliminates the…
OSPF-MIBBigMetric
Textual Convention: OSPF-MIBBigMetric Integer32
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.2076.90.3.1.9
futOspfv3RouteInterfaceIndex
Interface Index associated with the route
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2076.90.3.1.10

futOspfv3AsExternalAggregationTable

table
.1.3.6.1.4.1.2076.90.4 · 1 row entry · 7 columns
Open in standard view 
Indicates whether for the specified address range
Type-7/Type-5 LSA will be aggregated or not generated.
futOspfv3AsExternalAggregationEntry entry .1.3.6.1.4.1.2076.90.4.1
Supports configuration of Type-5,Type-7 Address Range specifying
whether for the configured range, Type-5,Type-7 LSA will be
generated or not, and if generated whether aggregation is performed.
Indexes
futOspfv3AsExternalAggregationNetType futOspfv3AsExternalAggregationNet futOspfv3AsExternalAggregationPfxLength futOspfv3AsExternalAggregationAreaId
Column Syntax OID
futOspfv3AsExternalAggregationNetType
The prefix type of futOspfv3AsExternalAggregationNetType. Only
IPv6 addresses are expected.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2076.90.4.1.1
futOspfv3AsExternalAggregationNet
The IPv6 address of the Net indicated by
the range.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.2076.90.4.1.2
futOspfv3AsExternalAggregationPfxLength
The prefix length that pertains to the
range.
INET-ADDRESS-MIBInetAddressPrefixLength
Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.2076.90.4.1.3
futOspfv3AsExternalAggregationAreaId
Refer to description in futOspfv3AsExternalAggregationEffect.
OSPF-MIBAreaID
Textual Convention: OSPF-MIBAreaID OctetString
 .1.3.6.1.4.1.2076.90.4.1.4
futOspfv3AsExternalAggregationEffect
Indicates whether Type-5/Type-7 will be aggregated or not
generated for the specified range.
When set to 'allowAll' (3) and associated areaId is 0.0.0.0
aggregated Type-5 are generated for the specified range. In
addit…
Enumerationr/w
Enumerated Values:
1advertise
2doNotAdvertise
3allowAll
4denyAll
 .1.3.6.1.4.1.2076.90.4.1.5
futOspfv3AsExternalAggregationTranslation
This when set to enabled, P Bit is set in
the generated Type-7 LSA. When set disabled
P Bit is clear in the generated Type-7 LSA
for the range.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.90.4.1.6
futOspfv3AsExternalAggregationStatus
This variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2076.90.4.1.7

futOspfv3BRRouteTable

table
.1.3.6.1.4.1.2076.90.5 · 1 row entry · 8 columns
Open in standard view 
A table of routing information.
futOspfv3BRRouteEntry entry .1.3.6.1.4.1.2076.90.5.1
The information regarding a single route.
Indexes
futOspfv3BRRouteDest futOspfv3BRRouteNextHopType futOspfv3BRRouteNextHop futOspfv3BRRouteDestType
Column Syntax OID
futOspfv3BRRouteDest
Router Id of the destination router.
ABR/ASBR entries will have Router Id as
the destination network Id
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.90.5.1.1
futOspfv3BRRouteNextHopType
The prefix type of futOspfv3BRRouteNextHopType. Only
IPv6 addresses are expected.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2076.90.5.1.2
futOspfv3BRRouteNextHop
Next Hop IPv6 Address for this route. For direct
routes it has the value ::0.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.2076.90.5.1.3
futOspfv3BRRouteDestType
Type of the route. The route can be ABR route
entry or ASBR route entry
Enumeration
Enumerated Values:
2areaBorder
3asBoundary
 .1.3.6.1.4.1.2076.90.5.1.4
futOspfv3BRRouteType
Type of the route
Enumeration
Enumerated Values:
1intraArea
2interArea
 .1.3.6.1.4.1.2076.90.5.1.5
futOspfv3BRRouteAreaId
Area ID associated with the route
OSPF-MIBAreaID
Textual Convention: OSPF-MIBAreaID OctetString
 .1.3.6.1.4.1.2076.90.5.1.6
futOspfv3BRRouteCost
The cost associated with the route
OSPF-MIBBigMetric
Textual Convention: OSPF-MIBBigMetric Integer32
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.2076.90.5.1.7
futOspfv3BRRouteInterfaceIndex
Interface Index associated with the route
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2076.90.5.1.8

futOspfv3RedistRouteCfgTable

table
.1.3.6.1.4.1.2076.90.6 · 1 row entry · 8 columns
Open in standard view 
A table describing the configuration of Metric Cost and Route
Type information to be applied to the routes learnt from the RTM.
futOspfv3RedistRouteCfgEntry entry .1.3.6.1.4.1.2076.90.6.1
Information describing the configuration of single route entry.
Indexes
futOspfv3RedistRouteDestType futOspfv3RedistRouteDest futOspfv3RedistRoutePfxLength
Column Syntax OID
futOspfv3RedistRouteDestType
The prefix type of futOspfv3RedistRouteDestType. Only
IPv6 addresses are expected.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2076.90.6.1.1
futOspfv3RedistRouteDest
IPv6 Address of the Destination route.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.2076.90.6.1.2
futOspfv3RedistRoutePfxLength
Prefix Length of the Destination route.
INET-ADDRESS-MIBInetAddressPrefixLength
Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.2076.90.6.1.3
futOspfv3RedistRouteMetric
The Metric value applied to the route before it is adv. into the
OSPFv3 Domain.
OSPF-MIBBigMetricr/w
Textual Convention: OSPF-MIBBigMetric Integer32
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.2076.90.6.1.4
futOspfv3RedistRouteMetricType
The Metric Type applied to the route before it is adv. into the
OSPFv3 Domain
Enumerationr/w
Enumerated Values:
3type1External
4type2External
 .1.3.6.1.4.1.2076.90.6.1.5
futOspfv3RedistRouteTagType
The Tag Type MIB object describes whether Tags will be
automatically generated or will be manually configured.
If tags are manually configured , the futOspfv3RedistRouteTag
MIB has to be set with the Tag value needed.
Enumerationr/w
Enumerated Values:
1manual
2automatic
 .1.3.6.1.4.1.2076.90.6.1.6
futOspfv3RedistRouteTag
The Route Tag in case the user configures a Manual option for
the tags.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.90.6.1.7
futOspfv3RedistRouteStatus
The variable dispalys the status of the entry.Setting it to
'invalid' has the effect of rendering it inoperative.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2076.90.6.1.8

futOspfv3DistInOutRouteMapTable

table
.1.3.6.1.4.1.2076.90.8.1 · 1 row entry · 4 columns
Open in standard view 
A table describing the configuration of filtering for route map.
futOspfv3DistInOutRouteMapEntry entry .1.3.6.1.4.1.2076.90.8.1.1
Information describing the filtering configuration of single entry.
Indexes
futOspfv3DistInOutRouteMapName futOspfv3DistInOutRouteMapType
Column Syntax OID
futOspfv3DistInOutRouteMapName
Route map name.
OctetString
Constraints:
range: 1-20
 .1.3.6.1.4.1.2076.90.8.1.1.1
futOspfv3DistInOutRouteMapType
Type of route map to indicate the route map is for
distribute in or for distribute out or for distance.
1 - distance
2 - distribute in
3 - distribute out
Integer32
Constraints:
range: 1-3
 .1.3.6.1.4.1.2076.90.8.1.1.2
futOspfv3DistInOutRouteMapValue
Distance value ( this will be unused for distribute list )
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2076.90.8.1.1.3
futOspfv3DistInOutRouteMapRowStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2076.90.8.1.1.4

futOspfv3NeighborBfdTable

table
.1.3.6.1.4.1.2076.90.11.1 · 1 row entry · 1 columns
Open in standard view 
This table contains the neighbor Entry for Bfd
futOspfv3NeighborBfdEntry entry .1.3.6.1.4.1.2076.90.11.1.1
This entry contains information describing Bfd neighbor state
Indexes
No indexes recorded
Column Syntax OID
futOspfv3NbrBfdState
This object specifies the Neighbor Bfd state.It is a read-only object.
It is enabled internally only when BFD is
enabled for monitoring the neighbor IP path.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.90.11.1.1.1

futOspfv3IfAuthTable

table
.1.3.6.1.4.1.2076.90.12 · 1 row entry · 8 columns
Open in standard view 
This OSPF-V3 Interface Authentication Table describes the parameters
required for  cryptographic Authentication.
futOspfv3IfAuthEntry entry .1.3.6.1.4.1.2076.90.12.1
This object describes one Authentication Key from the viewpoint of OSPF-V3.
Indexes
futOspfv3IfAuthIfIndex futOspfv3IfAuthKeyId
Column Syntax OID
futOspfv3IfAuthIfIndex
This object specifies the interface index of OSPFv3 interface.
It corresponds to the interface index of the
IPv6 interface on which OSPFv3 is configured.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2076.90.12.1.1
futOspfv3IfAuthKeyId
This object identifies the secret key used to create the
message digest appended to the OSPF-V3 packet.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2076.90.12.1.2
futOspfv3IfAuthKey
This object identifies the secret key which is used to create the
message digest appended to the OSPF-V3 packet.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2076.90.12.1.3
futOspfv3IfAuthKeyStartAccept
This object specifies the time at which the router starts Accepting packets that have
been created with the key. If the value is not set, then it
will be taken as 0, The value 0 mapped to key creation time
SNMPv2-TCDateAndTimer/w
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2076.90.12.1.4
futOspfv3IfAuthKeyStartGenerate
This object specifies the time at which the router starts generating packets that have
been created with the key. If the value is not set, then it
will be taken as 0, The value 0 mapped to key creation time
SNMPv2-TCDateAndTimer/w
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2076.90.12.1.5
futOspfv3IfAuthKeyStopGenerate
This object specifies the time at which the router stops using the key for packets
generation. If the value is not set, then it will be taken
as infinite and displayed as 0 example,
Tuesday May 26, 2015 at 1:30 PM shoul…
SNMPv2-TCDateAndTimer/w
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2076.90.12.1.6
futOspfv3IfAuthKeyStopAccept
This object specifies the time at which the router stops using the key for packets
Verification. If the value is not set, then it will be taken
as infinite and displayed as 0 example,
Tuesday May 26, 2015 at 1:30 PM sho…
SNMPv2-TCDateAndTimer/w
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2076.90.12.1.7
futOspfv3IfAuthKeyStatus
This object identifies the status of the key.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2076.90.12.1.8

futOspfv3VirtIfAuthTable

table
.1.3.6.1.4.1.2076.90.13 · 1 row entry · 9 columns
Open in standard view 
This OSPF-V3 Interface Authentication Table describes the parameters
required for cryptographic Authentication.
futOspfv3VirtIfAuthEntry entry .1.3.6.1.4.1.2076.90.13.1
This object describes entry of one
Authentication Key from the viewpoint of OSPF-V3.
Indexes
futOspfv3VirtIfAuthAreaId futOspfv3VirtIfAuthNeighbor futOspfv3VirtIfAuthKeyId
Column Syntax OID
futOspfv3VirtIfAuthAreaId
This object specifies the transit area that the virtual link
traverses. By definition, this should not be 0.0.0.0.
OSPF-MIBAreaID
Textual Convention: OSPF-MIBAreaID OctetString
 .1.3.6.1.4.1.2076.90.13.1.1
futOspfv3VirtIfAuthNeighbor
This object specifies the Router ID of the Virtual Neighbor.
OSPF-MIBRouterID
Textual Convention: OSPF-MIBRouterID OctetString
 .1.3.6.1.4.1.2076.90.13.1.2
futOspfv3VirtIfAuthKeyId
This object identifies the secret key used to create the
message digest appended to the OSPF-V3 packet.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2076.90.13.1.3
futOspfv3VirtIfAuthKey
This object specifies the secret key which is used to create the
message digest appended to the OSPF-V3 packet.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2076.90.13.1.4
futOspfv3VirtIfAuthKeyStartAccept
This object specifies the time at which the router starts generating packets that have
been created with the key. If the value is not set, then it
will be taken as 0, The value 0 mapped to key creation time
SNMPv2-TCDateAndTimer/w
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2076.90.13.1.5
futOspfv3VirtIfAuthKeyStartGenerate
This object specifies the time at which the router starts generating packets that have
been created with the key. If the value is not set, then it
will be taken as 0, The value 0 mapped to key creation time
SNMPv2-TCDateAndTimer/w
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2076.90.13.1.6
futOspfv3VirtIfAuthKeyStopGenerate
This object specifies the time at which the router stops using the key for packets
generation. If the value is not set, then it will be taken
as infinite and displayed as 0 example,
Tuesday May 26, 2015 at 1:30 PM shoul…
SNMPv2-TCDateAndTimer/w
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2076.90.13.1.7
futOspfv3VirtIfAuthKeyStopAccept
This object specifies the time at which the router stops using the key for packets
Verification. If the value is not set, then it will be taken
as infinite and displayed as 2136-02-06,06:28:15,
DateTime equivalent to ma…
SNMPv2-TCDateAndTimer/w
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2076.90.13.1.8
futOspfv3VirtIfAuthKeyStatus
This object identifies the status of the key.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2076.90.13.1.9

futOspfv3VirtIfCryptoAuthTable

table
.1.3.6.1.4.1.2076.90.14 · 1 row entry · 2 columns
Open in standard view 
This table holds the crypto authentication type.
futOspfv3VirtIfCryptoAuthEntry entry .1.3.6.1.4.1.2076.90.14.1
This object describes the entry of the cryptographic authentication.
Indexes
No indexes recorded
Column Syntax OID
futOspfv3VirtIfCryptoAuthType
This object specifies the SHA crypto authentication type to be
used on the interface
Enumerationr/w
Enumerated Values:
1sha1
3sha256
4sha384
5sha512
6none
 .1.3.6.1.4.1.2076.90.14.1.1
futOspfv3VirtIfCryptoAuthMode
This object specifies the crypto authentication mode to be used on the interface
for setting transition
Enumerationr/w
Enumerated Values:
1full
2transition
3none
 .1.3.6.1.4.1.2076.90.14.1.2