futOspfv3HelperGraceTimeLimit
ARICENT-OSPFV3-MIB ·
.1.3.6.1.4.1.2076.90.1.12
Object
scalar
r/w
Integer32
Configured OSPFv3 graceful restart interval limit in helper side. Time is configured in seconds. If this object is set to 0, then the helper accepts the restarting router's grace period received from grace LSA. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
Context
- MIB
- ARICENT-OSPFV3-MIB
- OID
.1.3.6.1.4.1.2076.90.1.12- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- futospfv3GeneralGroup
- Siblings
- 23
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-1800
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| futOspfv3OverFlowState Indicates whether router is in overflow state or not. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.90.1.1 |
| futOspfv3RestartStrictLsaChecking Indicates if strict LSA checking is enabled for graceful restart.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.90.1.10 |
| futOspfv3HelperSupport The router's helper support for OSPFv3 graceful restart.
Options include: unknown,softwarerestart,swreloadupgrade,
switchtoredundant.
futOspfv3HelperSupport is indicated by bitmap… | scalar | Bits | .1.3.6.1.4.1.2076.90.1.11 |
| futOspfv3RestartAckState Indicates Reception required / not-required . whether GraceLSAs
sent by this router are expected to be acknowledged by peers.
This object is persistent and when written… | scalar | Enumeration | .1.3.6.1.4.1.2076.90.1.13 |
| futOspfv3GraceLsaRetransmitCount Number of retransmissions for unacknowledged GraceLSAs | scalar | Integer32 | .1.3.6.1.4.1.2076.90.1.14 |
| futOspfv3RestartReason The router's restarter reason code of OSPFv3 graceful restart.
Options include: unknown,softwarerestart,swreloadupgrade,
switchtoredundant.
This object is persistent and when writ… | scalar | Enumeration | .1.3.6.1.4.1.2076.90.1.15 |
| futOspfv3ExtTraceLevel This object is used to define level of trace required for OSPFv3 GR.
Levels are defined as follows.
0x00000000 -- No Trace Support.
0x00000001 -- Restarting Router Trace.
0x0000… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.90.1.16 |
| futOspfv3SetTraps This object is used to enable and disable specific
OSPFv3 traps. Currently the following are defined
0x00000000 - Traps are not enabled.
0x00000001 - Restarting router status cha… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.90.1.17 |
| futOspfv3HotStandbyAdminStatus High Availabilty feature enabled or disabled in OSPFv3 | scalar | Enumeration | .1.3.6.1.4.1.2076.90.1.18 |
| futOspfv3HotStandbyState Internal State of the OSPFv3 instance.
init(1) - OSPFv3 instance is up and RM State is undetermined.
activeStandbyUp(2) - The RM state is active & standby is up.
activeStandbyDown… | scalar | Enumeration | .1.3.6.1.4.1.2076.90.1.19 |
| futOspfv3TraceLevel This object is used to define level of trace required for OSPF.
Levels are defined as follows.
0x00000100 -- Packet High Level Dump Trace.
0x00000200 -- Packet Low Level Dump Tra… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.90.1.2 |
| futOspfv3DynamicBulkUpdStatus Status of dynamic bulk update between active and dynamic
OSPFv3 instance.
notStarted(1): Dynamic Bulk Update has not yet been started.
inProgress(2): Dynamic Bulk Update is… | scalar | Enumeration | .1.3.6.1.4.1.2076.90.1.20 |
| futOspfv3StandbyHelloSyncCount Total number of hello packets synced to standby node. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.90.1.21 |
| futOspfv3StandbyLsaSyncCount Total number of LSAs synced to standby node. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.90.1.22 |
| futOspfv3BfdStatus This object enables/disables BFD feature in OSPFv3.
If enabled, OSPFv3 registers with BFD for neighbor IP path monitoring | scalar | Enumeration | .1.3.6.1.4.1.2076.90.1.23 |
| futOspfv3BfdAllIfState This object enables/disables BFD for all OSPFv3 interfaces.
If enabled, OSPFv3 registers with BFD for neighbor
IP path monitoring, when the OSPFv3 neighbor state
is FULL. Enablin… | scalar | Enumeration | .1.3.6.1.4.1.2076.90.1.24 |
| futOspfv3ABRType Different Types of ABRs supported | scalar | Enumeration | .1.3.6.1.4.1.2076.90.1.3 |
| futOspfv3NssaAsbrDefRtTrans Specifies the P-Bit setting for the default Type-7
LSA generated by ASBR(which is not ABR).When set
disabled, P-Bit is clear in the generated default Lsa.
When set to enabled, P-… | scalar | Enumeration | .1.3.6.1.4.1.2076.90.1.4 |
| futOspfv3DefaultPassiveInterface When set to true all OSPF interfaces created after this
setting will be passive interfaces.
If set to false OSPF interfaces created after this setting
will not be passive. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.90.1.5 |
| futOspfv3SpfDelay The Delay at which routing calculation is carried after a
topology change. | scalar | Integer32 | .1.3.6.1.4.1.2076.90.1.6 |
| futOspfv3SpfHoldTime The minimum time between two consecutive SPF calculations. | scalar | Integer32 | .1.3.6.1.4.1.2076.90.1.7 |
| futOspfv3RTStaggeringInterval This object denotes the time interval in milliseconds after which the route
calculation is suspended for doing all other OSPFv3 operations. Refault value of
this object is equal t… | scalar | Integer32 | .1.3.6.1.4.1.2076.90.1.8 |
| futOspfv3RTStaggeringStatus This object indicates the status of route table calculation
staggering option | scalar | Enumeration | .1.3.6.1.4.1.2076.90.1.9 |