ifWanPersistence
ARICENT-CFA-MIB ·
.1.3.6.1.4.1.2076.27.1.6.1.13
Object
column
deprecated
r/w
Enumeration
The persistence of the WAN interface in the system.
Demand(2) circuits are pre-configured but are opened only
when there is some data to be sent (these interfaces are
administratively UP, but operationally DORMANT and they are
made UP dynamically whenever there is any data to be sent
over the interface). The demand circuit configuration
continues to persist in the system.
Alll other WAN interface which do not fall under the above
categories are to be configured as other(1) which is the
default value.
Context
- MIB
- ARICENT-CFA-MIB
- OID
.1.3.6.1.4.1.2076.27.1.6.1.13- Type
- column
- Access
- readwrite
- Status
- deprecated
- Parent
- ifWanEntry
- Table
- ifWanTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | demand |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifWanInterfaceType deprecated The type of the WAN interface. This is
same as if MIB-2 ifType and ifMainType. | column | Enumeration | .1.3.6.1.4.1.2076.27.1.6.1.1 |
| ifWanIdleTimeout deprecated The minimum duration (in seconds) to wait before
disconnecting an idle established circuit/interface. (a
default value of 0 where not required) Specification
of the object is opti… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.27.1.6.1.10 |
| ifWanPeerIpAddr deprecated The IP address of the peer to whom this interface is
established with. Specification of this value is optional
for all interfaces.
For PPP and MLPPP interfaces, thi… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2076.27.1.6.1.11 |
| ifWanRtpHdrComprEnable deprecated Enable or disable the RTP header compression on the
WAN interface. This object is writable for only those
interface which are registered with IP. If the RTP
header compression neg… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.27.1.6.1.12 |
| ifWanConnectionType deprecated The type of WAN connection. This object
will not be applicable to PPP and MLPPP
interfaces and will have the value other(0).
For all other interfaces the default value
is permanen… | column | Enumeration | .1.3.6.1.4.1.2076.27.1.6.1.2 |
| ifWanVirtualPathId deprecated The VPI for ATM VCs. This object
will not be applicable to other
interfaces and will have the value 0. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.27.1.6.1.3 |
| ifWanVirtualCircuitId deprecated The VCI for ATM VCs, DLCI for Frame Relay VCs and
the channel identifier for X.25 VCs.
For SVCs this object is read-only, the value will be
assigned after the SVC … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.27.1.6.1.4 |
| ifWanPeerMediaAddress deprecated The Media Address of the peer to whom this
connection is to be established.
For ATM VCs this can be in E.164, NSAP or either of these along
with the subaddress. Fo… | column | OctetString | .1.3.6.1.4.1.2076.27.1.6.1.5 |
| ifWanSustainedSpeed deprecated The sustained or minimum gauranteed speed of
the interface. This is semantically similar to
the CIR for FR and SCR for ATM. The value to be
assigned is the CIR or SCR as the case … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.27.1.6.1.6 |
| ifWanPeakSpeed deprecated The maximum speed available on the interface.
This is semantically similar to the CIR+EIR for FR
and PCR for ATM. This value is used by IP-QoS.
For PPP links this … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.27.1.6.1.7 |
| ifWanMaxBurstSize deprecated The maximum burst size in bytes that the interface
can sustain. This is semantically similar to the Bc for FR
and MBS for ATM. This value is used by IP-QoS.
For PPP… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.27.1.6.1.8 |
| ifWanIpQosProfileIndex deprecated The index of an IP-QoS profile which is configured
in the IP-QoS MIB. Assigning the index of the profile
results in instantiation of that profile for the
interface.
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.27.1.6.1.9 |