ifUfdModuleStatus
ARICENT-CFA-MIB ·
.1.3.6.1.4.1.2076.27.1.27
Object
scalar
r/w
Enumeration
This read write objects gives actual status of the Uplink Failure Detection(UFD). When Uplink Failure Detection(UFD) is enabled, UFD starts functioning. When the UFD is disabled all the dynamically allocated memory will be freed and Uplink Failure Detection (UFD) stops functioning.
Context
- MIB
- ARICENT-CFA-MIB
- OID
.1.3.6.1.4.1.2076.27.1.27- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- if
- Siblings
- 35
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifMaxInterfaces deprecated Specifies the maximum number of interfaces that can
be present in the system. | scalar | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2076.27.1.1 |
| ifResetMgmtVlanList A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanId values
1 through 8; the second octet to VLANs 9 through
16 etc. The most signific… | scalar | OctetString | .1.3.6.1.4.1.2076.27.1.10 |
| ifSecondaryIpAddressTable A list of secondary IP addresses configured over the
interfaces registered with IP.
This table is a extension to the ifMainTable.
The index to this table has th… | table | - | .1.3.6.1.4.1.2076.27.1.11 |
| ifMainExtTable This table is an extension to the ifMainTable. | table | - | .1.3.6.1.4.1.2076.27.1.12 |
| ifCustTLVTable This table allows generic TLV data to be configured per-port.
It may be used to store any port-specific information that
is required by any application. | table | - | .1.3.6.1.4.1.2076.27.1.13 |
| ifCustOpaqueAttrTable This table allows generic integer attributes to be configured
per-port. These attributes will be opaque from ISS's point of
view and will not be processed/understood by ISS. | table | - | .1.3.6.1.4.1.2076.27.1.14 |
| ifBridgeILanIfTable This table is used to read the status of an I-Lan interface
created from Iftable. An I-LAN Interface is
used to create internal connections between bridge ports in a
802.1 devic… | table | - | .1.3.6.1.4.1.2076.27.1.15 |
| ifTypeProtoDenyTable A table to configure the interface types and bridge port types accessible
to various protocol(s). This table will indicate whether
a particular type of interface is to be created… | table | - | .1.3.6.1.4.1.2076.27.1.16 |
| ifmDebug Enables the tracing in the selected submodule in CFA. A 32 bit
integer is used to store the Tracing level in the specified module.
Different Tracing Levels -
BIT 0 - Initiali… | scalar | Unsigned32 | .1.3.6.1.4.1.2076.27.1.17 |
| ifIvrMappingTable This table is used to configure the list of vlans to be
associated for an IVR interface.
The primary Index to this table can only be a IVR interface. | table | - | .1.3.6.1.4.1.2076.27.1.18 |
| ifHCErrorTable A list of interface entries. The number of entries is
given by the value of ifNumber. This table contains
additional objects for the interface table. | table | - | .1.3.6.1.4.1.2076.27.1.19 |
| ifMaxPhysInterfaces deprecated Specifies the maximum number of physical interfaces
that can be present in the system. | scalar | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2076.27.1.2 |
| ifSecurityBridging Enables or Disables Security for Bridged Packets globally. | scalar | Enumeration | .1.3.6.1.4.1.2076.27.1.20 |
| ifSetSecVlanList A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanId values
1 through 8; the second octet to VLANs 9 through
16 etc. The most signific… | scalar | OctetString | .1.3.6.1.4.1.2076.27.1.21 |
| ifResetSecVlanList A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanId values
1 through 8; the second octet to VLANs 9 through
16 etc. The most signific… | scalar | OctetString | .1.3.6.1.4.1.2076.27.1.22 |
| ifSecIvrIfIndex An Integer which Indicates the IfIndex of IVR Interface used in
Security Processing of Bridged Traffic | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.27.1.23 |
| ifAvailableIndexTable This table returns the next available free interface
index for the given interface type | table | - | .1.3.6.1.4.1.2076.27.1.24 |
| ifACTable A list of Attachment Circuit interface related
configurations. Attachment Circuit is a virtual interface
that is a combination of physical port and customer vlan
identifier or it… | table | - | .1.3.6.1.4.1.2076.27.1.25 |
| ifUfdSystemControl The administrative system control status of the Uplink Failure
Detection(UFD) module.
The value 'start' (1) indicates that the Uplink Failure
Detection(UFD) feature should be sta… | scalar | Enumeration | .1.3.6.1.4.1.2076.27.1.26 |
| ifSplitHorizonSysControl The administrative system control status
requested by management for Split Horizon.
The value 'start' (1) indicates that all
resources required for split horizon… | scalar | Enumeration | .1.3.6.1.4.1.2076.27.1.28 |
| ifSplitHorizonModStatus The administrative module status requested
by management for Split Horizon.This
enables or disables Split horizon in the
system. A value of 'enabled'(1) indicates
th… | scalar | Enumeration | .1.3.6.1.4.1.2076.27.1.29 |
| ifAvailableIndex Shows an ifIndex which is available for creation of
any new virtual (non-physical) interface in the system.
This ifIndex value can be used for creation of interfaces
in the ifMain… | scalar | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2076.27.1.3 |
| ifUfdGroupTable This table contains a list of all the Uplink Failure Detection
(UFD). Group entries in the system.
This table is a extension to the ifMainTable. The index to this
tab… | table | - | .1.3.6.1.4.1.2076.27.1.30 |
| ifLinkUpEnabledStatus This enables or disables Link Up Delay functionality in the System.
A value of 'enabled'(1) indicates that, operational status of the
link is suspended for a configured delay ti… | scalar | Enumeration | .1.3.6.1.4.1.2076.27.1.31 |
| ifOOBNode0SecondaryIpAddress Specifies the secondary IP address associated with the
OOB interface of Node0 | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2076.27.1.32 |
| ifOOBNode0SecondaryIpMask Specifies the IP Subnet Mask associted with the
secondary ip address of OOB interface in node0.
If not specified, this object takes the default
subnet mask value based… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2076.27.1.33 |
| ifOOBNode1SecondaryIpAddress Specifies the secondary IP address associated with the
OOB interface of Node1 | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2076.27.1.34 |
| ifOOBNode1SecondaryIpMask Specifies the IP Subnet Mask associted with the
secondary ip address of OOB interface in node1.
If not specified, this object takes the default
subnet mask value based… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2076.27.1.35 |
| ifVlanIpTable This table contains L3 interface attributes
that are used for manipulating entries in
various tables.
ifVlanIpTable entry creation, modification and
deletion result… | table | - | .1.3.6.1.4.1.2076.27.1.36 |
| ifMainTable A list of all the interface entries in the system.
This table contains objects which are applicable to all
types of interfaces in the system. This table is a
proprietary extensi… | table | - | .1.3.6.1.4.1.2076.27.1.4 |
| ifIpTable A list of all the interface entries in the system which
are registered with IP.
This table contains objects which are applicable for the
management of IP over the… | table | - | .1.3.6.1.4.1.2076.27.1.5 |
| ifWanTable deprecated A list of all the WAN interfaces in the system.
This table contains objects which are applicable for the
management of WAN interfaces like PPP, MP bundle and
FR/X.25/AT… | table | - | .1.3.6.1.4.1.2076.27.1.6 |
| ifAutoCktProfileTable deprecated A list of all the automatic circuit profiles in the system.
This table contains objects which are useful for configuration
of an automatic circuit profile for a given interface.
… | table | - | .1.3.6.1.4.1.2076.27.1.7 |
| ifIvrTable A list of all the interfaces in the system with IVR related
configurations.
This table is an extension to the ifMainTable. The index to
this table has the semantics of… | table | - | .1.3.6.1.4.1.2076.27.1.8 |
| ifSetMgmtVlanList A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanId values
1 through 8; the second octet to VLANs 9 through
16 etc. The most signific… | scalar | OctetString | .1.3.6.1.4.1.2076.27.1.9 |