apsConfigWaitToRestoreR
APS-R-MIB ·
.1.3.6.1.4.1.164.20.2.1.1.2.1.6
Object
column
r/w
Integer32
The Wait To Restore period in seconds.
This field only applies if revertive switching is enabled,
otherwise this value is ignored. After clearing of a
condition that necessitated an automatic switch, the
wait to restore period must elapse before reverting.
This is intended to avoid rapid switch oscillations.
This object may not be modified if the associated
apsConfigRowStatus object is equal to active(1).
Context
- MIB
- APS-R-MIB
- OID
.1.3.6.1.4.1.164.20.2.1.1.2.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- apsConfigEntryR
- Table
- apsConfigTableR
- Siblings
- 7
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-720
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| apsConfigNameR A textual name for the APS group. | column | OctetString | .1.3.6.1.4.1.164.20.2.1.1.2.1.1 |
| apsConfigRowStatusR The status of this APS group entry.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Also,
all associated apsCh… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.20.2.1.1.2.1.2 |
| apsConfigModeR The architecture and mode of the APS group.
The values mean:
onePlusOne
The 1+1 architecture permanently bridges the working
line… | column | Bits | .1.3.6.1.4.1.164.20.2.1.1.2.1.3 |
| apsConfigSdBerThresholdR The Signal Degrade Bit Error Rate.
The negated value of this number is used as the exponent of
10 for computing the threshold value for the Bit Error Rate
(BER). Fo… | column | Integer32 | .1.3.6.1.4.1.164.20.2.1.1.2.1.4 |
| apsConfigSfBerThresholdR The Signal Failure Bit Error Rate.
The negated value of this number is used as the exponent of
10 for computing the threshold value for the Bit Error Rate
(BER). Fo… | column | Integer32 | .1.3.6.1.4.1.164.20.2.1.1.2.1.5 |
| apsConfigCreationTimeR The value of sysUpTime at the time the associated
apsConfigRowStatus instance was set to active. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.164.20.2.1.1.2.1.7 |
| apsConfigOperDelayR The Wait To Operate upon event in hundreds of msec.
This field only applies if revertive switching is enabled,
otherwise this value is ignored. The Delay period mus… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.2.1.1.2.1.8 |