apsConfigRowStatusR
APS-R-MIB ·
.1.3.6.1.4.1.164.20.2.1.1.2.1.2
Object
The status of this APS group entry.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Also,
all associated apsChanConfigEntry rows must represent
a set of consecutive channel numbers beginning with
zero.
If this object is set to destroy, all associated
apsChanConfigEntry, apsCommandEntry and apsChanStatusEntry
rows will be deleted. Also, The fields apsMapGroupName
and apsMapChanNumber in apsMapEntry rows corresponding
to the deleted channels will be set to a string of size 0
and -1 respectively.
This object may be set to notInService. When set to
notInService changes may be made to apsConfigMode,
apsConfigSdBerThreshold, apsCOnfigSfBerThreshold,
and apsConfigWaitToRestore. Also, rows may be
added and deleted from apsChanConfigTable.
Context
- MIB
- APS-R-MIB
- OID
.1.3.6.1.4.1.164.20.2.1.1.2.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- apsConfigEntryR
- Table
- apsConfigTableR
- Siblings
- 7
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| apsConfigNameR A textual name for the APS group. | column | OctetString | .1.3.6.1.4.1.164.20.2.1.1.2.1.1 |
| apsConfigModeR The architecture and mode of the APS group.
The values mean:
onePlusOne
The 1+1 architecture permanently bridges the working
line… | column | Bits | .1.3.6.1.4.1.164.20.2.1.1.2.1.3 |
| apsConfigSdBerThresholdR The Signal Degrade Bit Error Rate.
The negated value of this number is used as the exponent of
10 for computing the threshold value for the Bit Error Rate
(BER). Fo… | column | Integer32 | .1.3.6.1.4.1.164.20.2.1.1.2.1.4 |
| apsConfigSfBerThresholdR The Signal Failure Bit Error Rate.
The negated value of this number is used as the exponent of
10 for computing the threshold value for the Bit Error Rate
(BER). Fo… | column | Integer32 | .1.3.6.1.4.1.164.20.2.1.1.2.1.5 |
| apsConfigWaitToRestoreR The Wait To Restore period in seconds.
This field only applies if revertive switching is enabled,
otherwise this value is ignored. After clearing of a
condition tha… | column | Integer32 | .1.3.6.1.4.1.164.20.2.1.1.2.1.6 |
| apsConfigCreationTimeR The value of sysUpTime at the time the associated
apsConfigRowStatus instance was set to active. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.164.20.2.1.1.2.1.7 |
| apsConfigOperDelayR The Wait To Operate upon event in hundreds of msec.
This field only applies if revertive switching is enabled,
otherwise this value is ignored. The Delay period mus… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.2.1.1.2.1.8 |