junidApsConfigRowStatus
APS-MIB-JUNI ·
.1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.2
Object
The status of this APS group entry.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Also,
all associated junidApsChanConfigEntry rows must represent
a set of consecutive channel numbers beginning with
0 or 1, depending on the selected architecture.
When set to notInService changes may be made to junidApsConfigMode,
junidApsConfigRevert, junidApsConfigDirection, junidApsConfigExtraTraffic,
junidApsConfigSdBerThreshold, junidApsConfigSfBerThreshold,
and junidApsConfigWaitToRestore. Also, associated junidApsChanConfigTable
objects may be added, deleted and modified.
Context
- MIB
- APS-MIB-JUNI
- OID
.1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- junidApsConfigEntry
- Table
- junidApsConfigTable
- Siblings
- 9
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| junidApsConfigName A textual name for the APS group. | column | OctetString | .1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.1 |
| junidApsConfigCreationTime The value of sysUpTime at the time the row was
created | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.10 |
| junidApsConfigMode The architecture of the APS group.
onePlusOne
The 1+1 architecture permanently bridges the working
line to the protection line.
oneToN… | column | Enumeration | .1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.3 |
| junidApsConfigRevert The revertive mode of the APS group.
nonrevertive
Traffic remains on the protection line until another switch
request is received.
rev… | column | Enumeration | .1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.4 |
| junidApsConfigDirection The directional mode of the APS group.
unidirectional
The unidirectional mode provides protection in one direction.
bidirectional
… | column | Enumeration | .1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.5 |
| junidApsConfigExtraTraffic This object enables or disables the transfer of extra traffic
on the protection channel in a 1:n architecture. This object
must be set to disabled if the architecture is 1+1. It m… | column | Enumeration | .1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.6 |
| junidApsConfigSdBerThreshold The Signal Degrade Bit Error Rate.
The negated value of this number is used as the exponent of
10 for computing the threshold value for the Bit Error Rate
(BER). Fo… | column | Integer32 | .1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.7 |
| junidApsConfigSfBerThreshold The Signal Failure Bit Error Rate.
The negated value of this number is used as the exponent of
10 for computing the threshold value for the Bit Error Rate
(BER). Fo… | column | Integer32 | .1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.8 |
| junidApsConfigWaitToRestore The Wait To Restore period in seconds.
After clearing of a condition that necessitated an
automatic switch, the wait to restore period must elapse
before reverting.… | column | seconds Integer32 | .1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.9 |